Breaking wave loads at vertical seawalls and breakwaters     

Giovanni Cuomo  William Allsop  Tom Bruce  Jonathan Pearson 《Coastal Engineering》2010

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.  相似文献   

Study on low‐strain integrity testing of pipe‐pile using the elastodynamic finite integration technique     

Zhi Tang Lu  Zhi Liang Wang  Dong Jia Liu 《国际地质力学数值与分析法杂志》2013,37(5):536-550

This study focuses on the three‐dimensional (3‐D) characteristics of wave propagation in pipe‐pile using elastodynamic finite integration technique. First, a real 3‐D pile‐soil model in cylindrical coordinate system is presented. Then, the governing equations are established. With the boundary and initial conditions, the numerical solution is obtained. The accuracy and feasibility of the self‐written code are further verified via comparing with the measured data. Velocity histories at different angles of pile top and pile tip are illustrated, and the snapshots reflecting the 3‐D characteristics of wave propagation are given. It shows that the interferences of Rayleigh waves can confuse the result interpretation for pile integrity testing. The increase of hammer contact time can effectively mitigate the interferences, and the interferences of Rayleigh waves are weakest at an angle of 90° from where hammer hits. Besides, surrounding soil can partly mitigate the wave interferences. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Characterization of the mesospheric sodium layer at La Palma     

L. Michaille  J.B. Clifford  J.C. Dainty †  T. Gregory  J.C. Quartel  F.C. Reavell  R.W. Wilson  N.J. Wooder 《Monthly notices of the Royal Astronomical Society》2001,328(4):993-1000

We present the results of a mesospheric sodium monitoring programme at La Palma carried out through five campaigns of one week each, from 1999 September to 2000 August. The yearly averaged parameters of the layer (the sodium column density and the width) are given. We show that the short time-scale dynamics of the layer are governed by the sporadic layers with an average frequency of one event per night. The influence of the short time-scale dynamics of the layer on an adaptive optics system working on the William Herschel Telescope is quantified. It appears that it is a small effect in terms of defocus error. Finally, we present data obtained during the Perseid meteor shower and show that the dynamics of the sodium layer undergoes a transition with the meteoric activity.  相似文献   

Model of optical turbulence profile at Cerro Pachón     

A. Tokovinin  T. Travouillon 《Monthly notices of the Royal Astronomical Society》2006,365(4):1235-1242

New measurements of optical turbulence profile at the Cerro Pachón observatory in Chile are analysed jointly with previously published data to model the variations of the intensity and thickness of the ground layer and free atmosphere under a variety of observing conditions. This work is motivated by the need to predict statistically the performance of ground-layer adaptice optics. We find that the ground-layer profile can be represented by a decaying exponent with a scale height of 20–40 m, increasing to 100 m under bad conditions. The zone from 6 to 500 m contributes typically about 61 per cent to the total integral, the latter causing a median seeing of 0.77 arcsec. Turbulence integrals in the ground layer and in free atmosphere vary independently of each other, in 50 per cent of cases they deviate by less than 1.8 times from their respective median values. The existence of periods with low turbulence in the free atmosphere and their importance for adaptive optics is stressed.  相似文献   

正确测定望远镜光能集中度的方法     

苏定强 《天文学报》1994,35(1):98-100

正确测定望远镜光能集中度的方法苏定强（中国科学院南京天文仪器研制中心，南京２１００４２）主题词天文光学－望远镜－光学检验天文望远镜广泛采用的象质判据是光能集中度，即一定比例的光能量集中在多大的圆中。例如，七十年代的优秀望远镜光能集中度的标准是８０％的...  相似文献   

我国天文气候特点及潜在（光学／红外）优良台址探讨     

黄寅亮  毛节泰 《中国天文和天体物理学报》1994,(4)

收集了我国１９７８─１９８６年和１９９０年，共１０年时间的１９２个地面气象站每天四次总云量的观测资料，分别计算了北京时间０８ｈ，０２ｈ和０８ｈ以及２０ｈ，０２ｈ和０８ｈ的无云概率。分析结果表明：我国所处的天文气候条件的大环境并非是世界上最好的，但在国内相对较好的区域里，精心挑选出受局部地形影响形成的较好台址还是有可能的。  相似文献   

Shaking table tests of a resilient bridge system with precast reinforced concrete columns equipped with springs     

Natalia Reggiani Manzo  Michalis F. Vassiliou  Harris Mouzakis  Efstratios Badogiannis 《地震工程与结构动力学》2022,51(1):213-239

This paper presents the shake table test results of a novel system for the design of precast reinforced concrete bridges. The specimen comprises a slab and four precast columns. The connections are dry and the columns are connected to the slab by an ungrouted tendon. One of the tendon ends is anchored above the slab, in series with a stack of washer springs, while the other end is anchored at the bottom of the column. The addition of such a flexible restraining system increases the stability of the system, while keeping it relatively flexible allowing it to experience negative post-uplift stiffness. It is a form of seismic isolation. Anchoring the tendon within the column, caps the design moment of the foundation, and reduces its size. One hundred and eighty-one shake table tests were performed. The first 180 caused negligible damage to the specimen, mainly abrasion at the perimeter of the column top ends. Hence, the system proved resilient. The 181^st excitation caused collapse, because the tendons unexpectedly failed at a load less than 50% of their capacity (provided by the manufacturer), due to the failure of their end socket. This highlights the importance of properly designing the tendons. The tests were used to statistically validate a rigid body model. The model performed reasonably well never underestimating the median displacement response of the center of mass of the slab by more than 30%. However, the model cannot predict the torsion rotation of the slab that was observed in the tests and is due to imperfections.  相似文献   

JGN型耐高温建筑结构胶抗震加固性能研究          下载免费PDF全文

程希莹  于敏  杨瑞敏  张伟  韩意 《地震工程学报》2022,44(5):1059-1066

为有效增强建筑结构的抗震性能、提高建筑抗震水平,对JGN型耐高温建筑结构胶抗震加固性能展开研究。将高活性酚醛胺(T－31)作为主固化剂、聚酰胺树脂(PA)为辅助固化剂,结合气相白炭黑、超细石英砂、石棉纤维、纳米材料、环氧树脂等材料,制备JGN型耐高温建筑结构胶。在高温环境下,使用万能试验机分析不同配比条件对结构胶抗震加固性能的影响。测试主要以拉伸强度、压缩强度以及压缩弹性模量为指标。测试结果表明：当固化剂质量比为45∶15、气相白炭黑掺量为4.5%、超细石英砂掺量为10%、石棉纤维掺量为10.5%、纳米SiO₂掺量为3.5%、纳米CaCO₃掺量为2.5%时,JGN型耐高温建筑结构胶的拉伸强度和压缩强度更大,压缩弹性模量得到优化,结构胶的抗震加固性能达到最佳状态。  相似文献   

钨矿石和锡矿石化学成分分析能力验证结果评价和离群值原因     

甘露  罗代洪  吴淑琪 《岩矿测试》2015,34(1):111-117

金属矿产的勘查、评价、开发与综合利用要求对不同矿石品位与精矿的完整系列品质进行评价检测和仲裁测试。钨矿石和锡矿石作为金属矿的重要矿种,在客观上要求相关实验室应具备不同含量品级钨矿石和锡矿石组分的检测能力。本文按照国家认证认可监督委员会(CNCA)编号为CNCA-13-A14的钨矿石和锡矿石化学成分分析能力验证计划的要求,对中国30个省市、自治区的58个实验室提供的8个元素(W、Sn、Cu、Pb、Zn、Mo、Sb、Bi)的测定结果进行能力验证分析,采用稳健统计法,根据Z比分数判定参加实验室的检测能力。根据Z比分数≤2为满意结果的判定标准,51个实验室全部结果的Z比分数≤2,总体结果满意率(各元素的Z比分数均≤2的实验室占总实验室的比例)为88%,出现可疑和离群结果的实验室占12%。总体上钨矿石和锡矿石中元素Sb、Pb、Zn的满意率较高(其中锡矿石的Zn测定结果全部满意),W、Bi稍差;钨矿石各元素的检测水平差异小,整体结果好于锡矿石。钨矿石和锡矿石分析能力验证结果产生离群值的原因,一方面是实验室的测试水平存在差异;另一方面是各实验室采用的检测方法分散,有化学分析方法和仪器分析方法,化学分析方法检测步骤多,仪器分析方法方便快速,逐渐成为例行检测方法,两类方法的影响因素都较多。本文提出,提高实验室的检测水平和检测能力,需要适当统一检测方法,提高方法掌握的熟练程度,避免仪器状态对分析结果的影响,确保检测结果的一致性和准确性。  相似文献   

沉淀-陈化-返溶作用和压力对热液中氟钛络合物高温水解的影响及地质意义   总被引：3，自引：3，他引：0  

何俊杰  丁兴  王玉荣  孙卫东 《岩石学报》2015,31(7):1870-1878

钛是自然界中最不活泼的金属元素之一,然而越来越多的证据显示钛可以在特定条件下能进入热液流体中发生迁移,其中氟可能在其中扮演着重要的角色。本文研究了300℃和50~400MPa压力条件下氟钛络合物(K2Ti F6)的稳定性以及沉淀-陈化-返溶作用和压力对氟钛络合物水解行为的影响。研究结果显示,氟钛络合物水解的过程中,由于Ti O2沉淀物的陈化作用,在稳定的温度和压力条件下,沉淀物的返溶很难发生;但在缓慢降温和机械性振荡过程中,沉淀物的返溶会明显发生。而且,在温度不变的情况下,压力的改变对K2Ti F6水解并没有显著的影响,显示氟钛络合物不管在高压还是低压环境下均遵循近似的水解规律。本文认为主要的原因在于压力的增高会促进水解反应沉淀物的陈化,进而抑制沉淀物的返溶,但并不破坏水解反应的平衡。最后,本文提出金属络合物的形成-水解-沉淀/返溶-陈化过程是水-岩作用或热液成矿过程中高场强元素活化、迁移和成矿的主要机制。  相似文献