Shaking table tests of a resilient bridge system with precast reinforced concrete columns equipped with springs     

Natalia Reggiani Manzo  Michalis F. Vassiliou  Harris Mouzakis  Efstratios Badogiannis 《地震工程与结构动力学》2022,51(1):213-239

This paper presents the shake table test results of a novel system for the design of precast reinforced concrete bridges. The specimen comprises a slab and four precast columns. The connections are dry and the columns are connected to the slab by an ungrouted tendon. One of the tendon ends is anchored above the slab, in series with a stack of washer springs, while the other end is anchored at the bottom of the column. The addition of such a flexible restraining system increases the stability of the system, while keeping it relatively flexible allowing it to experience negative post-uplift stiffness. It is a form of seismic isolation. Anchoring the tendon within the column, caps the design moment of the foundation, and reduces its size. One hundred and eighty-one shake table tests were performed. The first 180 caused negligible damage to the specimen, mainly abrasion at the perimeter of the column top ends. Hence, the system proved resilient. The 181^st excitation caused collapse, because the tendons unexpectedly failed at a load less than 50% of their capacity (provided by the manufacturer), due to the failure of their end socket. This highlights the importance of properly designing the tendons. The tests were used to statistically validate a rigid body model. The model performed reasonably well never underestimating the median displacement response of the center of mass of the slab by more than 30%. However, the model cannot predict the torsion rotation of the slab that was observed in the tests and is due to imperfections.  相似文献   

FORSAT: a 3D forest monitoring system for cover mapping and volumetric 3D change detection     

Efstratios Stylianidis  Daniela Poli  Martin Hofer  Armin Gruen  Victor Sanchez Martin 《International Journal of Digital Earth》2020,13(8):854-885

ABSTRACT

A 3D forest monitoring system, called FORSAT (a satellite very high resolution image processing platform for forest assessment), was developed for the extraction of 3D geometric forest information from very high resolution (VHR) satellite imagery and the automatic 3D change detection. FORSAT is composed of two complementary tasks: (1) the geometric and radiometric processing of satellite optical imagery and digital surface model (DSM) reconstruction by using a precise and robust image matching approach specially designed for VHR satellite imagery, (2) 3D surface comparison for change detection. It allows the users to import DSMs, align them using an advanced 3D surface matching approach and calculate the 3D differences and volume changes (together with precision values) between epochs. FORSAT is a single source and flexible forest information solution, allowing expert and non-expert remote sensing users to monitor forests in three and four (time) dimensions. The geometric resolution and thematic content of VHR optical imagery are sufficient for many forest information needs such as deforestation, clear-cut and fire severity mapping. The capacity and benefits of FORSAT, as a forest information system contributing to the sustainable forest management, have been tested and validated in case studies located in Austria, Switzerland and Spain.  相似文献   

Ca(OH)2 Pre‐Treated Bentonite for Phosphorus Removal and Recovery From Synthetic and Real Wastewater          下载免费PDF全文

Giorgos Markou  Dimitris Mitrogiannis  Vassilis Inglezakis  Koenraad Muylaert  Nikolaos Koukouzas  Nikolaos Tsoukalas  Efstratios Kamitsos  Dimitrios Palles  Ioannis Baziotis 《洁净——土壤、空气、水》2018,46(2)

  相似文献   

Luminescence dating of the top of a deep water core from the NESTOR site near the Hellenic Trench,east Mediterranean Sea   总被引：1，自引：0，他引：1  

George S. Polymeris  George Kitis  Anastasios K. Liolios  Anastasios Sakalis  Konstantin Zioutas  Efstratios G. Anassontzis  Nestor C. Tsirliganis 《Quaternary Geochronology》2009,4(1):68-81

In the present study, the uppermost 3 cm of muddy, seabed sediment was collected from a deep-sea sediment core, drilled from a water depth of 4 km, near the deepest site of the Mediterranean Sea, outside Pylos, Greece. The core was divided into 7 layer samples, each 3–4 mm thick, in order to get an independent age assessment for each one using luminescence dating; from polymineral coarse grains in the range 30–60 μm. Between 11 and 22 aliquots were measured for each sample using the optically stimulated luminescence, single-aliquot regenerative-dose analysis. The estimated mean equivalent dose values had an uncertainty less than 3% and resulted in optical ages ranging from 3.5 to approximately 5 ka, with uncertainties lying between 5.5 and 7.4%. Multiple-aliquot, thermoluminescence-based, additive-dose, total bleaching approach provided equivalent doses with typical errors of 10–15% and ages in the range of 3.6 and 9.4 ka, with uncertainties up to 17%. Single-aliquot optical ages are shown to be relatively successful, due to their consistency with AMS ¹⁴C radiocarbon ages, obtained from Planktonic foraminifera from the same core. Luminescence dates for the topmost 1.5 cm indicate a substantial mix and post burial disturbance of the surface sediment. Below the topmost 1.5 cm, both luminescent approaches indicate ages which increase smoothly with depth. The concordant OSL and TL age estimates for the sample O5, in conjunction with specific luminescence properties and its major-element geochemical chemistry content, suggest that it was heated during the Santorini volcanic eruption. Deposition rates of 8.6–18.9 cm over 10 ka below the sample O5, provided by optical ages, exhibit an excellent level of agreement with the accumulation rate of 7–18 cm over 10 ka at the sea bottom, already reported for the site under study.  相似文献