Three dimensional seismic studies of deep-water hazard-related features on the northern slope of South China Sea     

《Marine and Petroleum Geology》2016

Mass transport deposits and geological features related to fluid flow such as gas chimneys, mud diapirs and volcanos, pockmarks and gas hydrates are pervasive on the canyon dominated northern slope of the Pearl River Mouth basin of the South China Sea. These deposits and structures are linked to serious geohazards and are considered risk factors for seabed installations. Based on high resolution three dimensional seismic surveys, seismic characteristics, distributions and origins of these features are analyzed. A distribution map is presented and geometrical parameters and spatial distribution patterns are summarized. Results show that various groups of the mapped features are closely tied to local or regional tectonism and sedimentary processes. Mass transport complexes are classified as slides near the shelf break, initially deformed slumps on the flanks of canyons and highly deformed slumps on the lower slope downslope of the mouth of canyons. We propose them to be preconditioned by pore pressure changes related to sea level fluctuations, steep topography, and fluid and fault activities. Gas chimneys are mainly located in the vicinity of gas reservoirs, while bottom-simulating reflectors are observed within the gas chimney regions, suggesting gas chimneys serve as conduits for thermogenic gas. Mud diapirs/volcanos and pockmarks are observed in small numbers and the formation of pockmarks is related to underlying gas chimneys and faults. This study aims at reducing risks for deep-water engineering on the northern slope of South China Sea.  相似文献   

Microstructural characteristics of the Whitby Mudstone Formation (UK)     

《Marine and Petroleum Geology》2016

When trying to improve gas productivity from unconventional sources a first aim is to understand gas storage and gas flow potential through the rock by investigating the microstructure, mineralogy and matrix porosity of unfractured shale. The porosity and mineralogy of the Mulgrave Shale member of the Whitby Mudstone Formation (UK) were characterized using a combination of microscopy, X-ray diffraction and gas adsorption methods on samples collected from outcrops. The Whitby Mudstone is an analogue for the Dutch Posidonia Shale which is a possible unconventional source for gas. The Mulgrave shale member of the Whitby Mudstone Formation can microstructurally be subdivided into a fossil rich (>15%) upper half and a sub-mm mineralogically laminated lower half. All clasts are embedded within a fine-grained matrix (all grains < 2 μm) implying that any possible flow of gas will depend on the porosity and the pore network present within this matrix. The visible SEM porosity (pore diameter > 100 nm) is in the order of 0.5–2.5% and shows a non-connected pore network in 2D. Gas adsorption (N2, Ar, He) porosity (pore diameters down to 2 nm) has been measured to be 0.3–7%. Overall more than 40% of the visible porosity is present within the matrix. Comparing the Whitby Mudstone Formation to other (producing) gas shales shows that the rock plots in the low porosity and high clay mineral content range, which could imply that Whitby Mudstone shales could be less favourable to mechanical fracturing than other gas shales. Estimated permeability indicates values in the micro-to nano-darcy range.  相似文献   

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策     

吕志凯  唐海发  刘群明  李小锋  王泽龙 《现代地质》2018,32(4):832

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。  相似文献   

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China     

Wei Dang  Jin-Chuan Zhang  Xuan Tang  Xiao-Liang Wei  Zhong-Ming Li  Cheng-Hu Wang  Qian Chen  Chong Liu 《地学前缘(英文版)》2018,9(2):559-575

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.  相似文献   

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope     

《China Geology》2018,1(3):367-373

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.  相似文献   

川东南丁山地区龙马溪组页岩裂缝特征及对含气性的影响   总被引：1，自引：0，他引：1       下载免费PDF全文

范存辉 钟 城秦启荣  胡东风李 虎 朱梦月 何 顺 《地质科学》2018,(2):487-509

川东南丁山地区是近年来四川盆地页岩气勘探开发的热点区域,裂缝的发育对页岩含气性及保存条件有重要的影响。综合运用野外露头、岩心、测井资料,结合岩石脆性矿物含量、岩石力学参数等数据,深入分析龙马溪组页岩裂缝发育特征和控制因素,并探讨了裂缝发育对含气性的影响。结果表明,丁山地区龙马溪组页岩裂缝主要以构造成因的剪切缝为主,裂缝优势方位共6组,主要包括4组平面剪切缝和2组剖面剪切缝,其发育主要受2个方向、3个阶段的构造应力场影响而成;裂缝延伸稳定,平均密度小,宽度小,充填程度高,主要被方解石和黄铁矿等充填。裂缝受控因素主要包括古构造应力场、构造部位、脆性矿物组分、岩石力学性质等;断层对裂缝发育具有明显的控制作用,其中断层两盘均存在裂缝发育程度急剧下降的临界范围,临界范围内裂缝发育程度高,超过此临界范围,裂缝发育程度变差且变化趋于平缓;不同期次的裂缝中,形成时间晚、规模过大、充填程度不高、与现今地应力方向一致或呈低角度相交的裂缝易造成页岩气的散失,对提高页岩含气性不利;龙马溪组岩石脆性矿物含量高,脆性指数属中等偏上程度,有利于构造缝发育且可压性较好。随着距齐岳山断裂距离的适当增加,龙马溪组页岩埋藏深度适中,地层压力增大,抗压强度增强高,脆性指数适中,构造保存条件变好,有利于不同方位的裂缝发育和页岩含气量的增加,位于该区域的DY2井与DY4井均位于该有利区域,含气性良好。研究结果对下一步深化页岩气勘探开发具有重要指导作用。  相似文献   

天然气水合物和游离气饱和度估算的影响因素   总被引：17，自引：7，他引：10       下载免费PDF全文

王秀娟  吴时国  刘学伟 《地球物理学报》2006,49(2):504-511

讨论了不同水合物胶结类型的流体饱和多孔隙固体中地震波的衰减情况,分析了估算天然气水合物和游离气饱和度影响因素.结果表明, 地层孔隙度、纵波速度模型和弹性模量的计算方法是影响反演水合物和游离气饱和度的关键因素.含水合物地层的吸收与水合物胶结类型密切相关,当水合物远离固体颗粒,像流体一样充填在孔隙时,品质因子出现负异常,而当水合物胶结固体颗粒影响骨架的弹性性质,其品质因子出现正异常.根据布莱克海台地区164航次995井的测井资料,分别应用低频和高频速度模型估算了水合物和游离气饱和度.由低频速度模型得到的水合物饱和度(占孔隙空间的)10%～20%,游离气饱和度(占孔隙空间的)05%～1%;而由高频速度模型得到的水合物饱和度(占孔隙空间的)5%～10%,游离气饱和度(占孔隙空间的)1%～2%.  相似文献   

国外海相油气田勘探实例之三美国得克萨斯州法尔韦油田     

张跃平 《海相油气地质》2006,11(1):52-62

美国法尔韦油田位于东得克萨斯盆地中心附近。油田发现于1960年,同年投入生产。原始地质储量为4亿桶,至2003年累计产油2.17亿桶。原油具挥发性,接近饱和。主要储层为下白垩统James组礁石灰岩,主要为骨架粒状灰岩/泥粒灰岩和富含双壳类粒泥状灰岩,各岩相的平均孔隙度一般在7%～11%,但平均渗透率在各岩相中不均,最高达(37～44)×10-3"m2。介绍了该油田的勘探史,描述了盆地构造演化史、含油气系统、地层沉积相和储层特征。  相似文献   

基于Android终端的GIS林业数据采集系统设计     

赵建鹏  朱行辉  李国洪 《测绘与空间地理信息》2020,(2):30-32,37

在野外利用智能终端设备采集数据可以保证获取资料的便利性与准确性。针对林业数据的数量庞大、科目多样、分布区域广泛等特点,本系统基于现有的Android平台结合百度地图API及定位SDK组件调用进行二次开发,实现地图接入、位置定位、路线搜索等服务,通过相关命令调用终端拍照等应用在数据库中实现数据采集、属性记录及导出功能,系统主要包括登录模块、采集模块、数据管理模块等。本文设计的Android终端GIS采集数据系统可以满足外业人员对林业数据的核查、修改与采集需求,为野外核查工作提供了新的模式和方法。  相似文献   

Wave run-up on bermed coastal structures     

《Applied Ocean Research》2019

Reliable estimation of wave run-up is required for the effective and efficient design of coastal structures when flooding or wave overtopping volumes are an important consideration in the design process. In this study, a unified formula for the wave run-up on bermed structures has been developed using collected and existing data. As data on berm breakwaters was highly limited, physical model tests were conducted and the run-up was measured. Conventional governing parameters and influencing factors were then used to predict the dimensionless run-up level with 2% exceedance probability. The developed formula includes the effect of water depth which is required in understanding the influence of sea level rise and consequent changes of wave height to water depth ratio on the future hydraulic performance of the structures. The accuracy measures such as RMSE and Bias indicated that the developed formula is more accurate than the existing formulas. Additionally, the new formula was validated using field measurements and its superiority was observed when compared to the existing prediction formulas. Finally, the new design formula incorporating the partial safety factor was introduced as a design tool for engineers.  相似文献