Elastic behavior of weakly cemented contact          下载免费PDF全文

V. Langlois 《国际地质力学数值与分析法杂志》2015,39(8):854-860

We investigate the elastic behavior of weakly cemented contact. We show that the radial distribution of stresses and the stiffnesses of a cemented contact are governed by the ratio a/RΛ, where R, a, and Λ are, respectively, the grain radius, the contact size, and the ratio of the elastic moduli of cement and grains. Moreover, we show that a cemented contact is always less stiff than a Hertzian contact having a similar size. Finally, we propose accurate approximate expressions of the contact stiffnesses. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling     

Taus R. C. Jrgensen  Douglas K. Tinkham  C. Michael Lesher 《Journal of Metamorphic Geology》2019,37(2):271-313

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.  相似文献   

Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space          下载免费PDF全文

Morteza Eskandari‐Ghadi  Ghasem Gorji‐Bandpey  Azizollah Ardeshir‐Behrestaghi  Seyed Masoud Nabizadeh 《国际地质力学数值与分析法杂志》2015,39(2):155-174

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Parallelized combined finite-discrete element (FDEM) procedure using multi-GPU with CUDA     

Quansheng Liu  Weiqin Wang  Hao Ma 《国际地质力学数值与分析法杂志》2020,44(2):208-238

This paper focuses on the efficiency of finite discrete element method (FDEM) algorithmic procedures in massive computers and analyzes the time-consuming part of contact detection and interaction computations in the numerical solution. A detailed operable GPU parallel procedure was designed for the element node force calculation, contact detection, and contact interaction with thread allocation and data access based on the CUDA computing. The emphasis is on the parallel optimization of time-consuming contact detection based on load balance and GPU architecture. A CUDA FDEM parallel program was developed with the overall speedup ratio over 53 times after the fracture from the efficiency and fidelity performance test of models of in situ stress, UCS, and BD simulations in Intel i7-7700K CPU and the NVIDIA TITAN Z GPU. The CUDA FDEM parallel computing improves the computational efficiency significantly compared with the CPU-based ones with the same reliability, providing conditions for achieving larger-scale simulations of fracture.  相似文献   

渝东南下古生界页岩构造裂缝形成及分布控制因素          下载免费PDF全文

岳锋  程礼军  焦伟伟  王飞 《地质科学》2016,(4):1090-1100

天然裂缝对页岩气储集和渗流有重要影响,但目前对页岩构造裂缝研究不够深入。本文通过露头、岩心裂缝观察和分析,探讨了渝东南下古生界页岩构造裂缝类型、形成机理及分布控制因素。基于裂缝特征及力学成因,将剪切裂缝分为高角度剪切裂缝、倾斜滑脱裂缝和水平滑脱裂缝。倾斜滑脱裂缝是在上覆岩层重力和水平构造应力共同作用下沿应力集中的软弱面发生剪切滑动形成,水平滑脱裂缝是在构造挤压应力作用条件下主要沿页理面方向的剪切或层间滑动形成;页理发育程度及岩层曲率是控制水平滑脱裂缝形成的关键因素,岩石矿物组成、构造作用及岩层厚度是控制其它类型构造裂缝形成和分布的主要因素,页岩岩石力学层的划分需要根据裂缝特征、岩性变化特征、岩石力学参数及沉积界面等综合确定,岩层厚度与层间构造裂缝密度呈负相关关系。  相似文献   

四川盆地西南部第三纪盆地原型及其演化          下载免费PDF全文

黄涵宇  何登发 《地质科学》2016,(2):354-383

第三纪是四川盆地大范围陆相沉积历史的最后阶段, 同时又是四川盆地重要的构造定形期.探究该时期原型盆地沉积充填规律与构造演化特征, 是揭示四川盆地形成演化过程, 还原其古地理、古气候演变的关键.在综合利用古地磁、地震、野外露头等资料的基础之上, 从盆-山结合的角度出发, 以地质历史时间为主要线索, 对第三纪原型盆地分阶段、分区域地进行了动态化分析研究.重建了各沉积时期原型盆地构造-古地理格局, 分析了盆地沉积充填规律并复原了不同阶段沉积相带的空间展布特征.主要受周缘山系逆冲推覆作用产生的构造负载和盆地基底构造的影响, 第三纪时期四川盆地沉积范围局限于西南部、南部地区, 以河、湖沉积环境为主, 处于持续地挤压、充填过程而具有萎缩消亡的趋势.现今残余第三系地层由老到新, 主要由名山组、芦山组、大邑砾岩组等地层组成(先后经历了: 受造山带挤压推覆作用和温暖干旱气候等因素影响, 发育湖盆边缘冲积扇和沙漠沉积环境, 处于快速沉降阶段的名山组沉积时期; 以及构造活动相对稳定, 湖盆面积不断减小, 以沙泥质沉积互层为特征的芦山组沉积时期; 和沿山前带由南向北迁移, 以发育大型冲积扇为特征的大邑砾岩组沉积时期).纵观整个第三纪构造演化历史, 反映出四川盆地西南部地区在第三纪时期表现为典型的陆内坳陷沉积盆地性质.同期的大地构造活动和气候变化等因素对原型盆地的形成与演化起到了重要的控制作用, 同时也对该时期盆地古地理格局和沉积充填规律产生了重要影响.  相似文献   

下扬子南黄海沉积盆地构造地质特征   总被引：6，自引：0，他引：6  

庞玉茂  张训华  肖国林  温珍河  郭兴伟  侯方辉  朱晓青 《地质论评》2016,62(3):604-616

南黄海盆地作为下扬子块体之上的大型叠合盆地,海相构造层保存完整,陆相断拗构造层也较为发育,盆地地质结构复杂,构造变形强烈,利用最新的地质地球物理资料和解释成果,对低勘探程度的南黄海盆地进行了研究,认为盆地演化大致经历了克拉通被动陆缘初始发育阶段—南缘前陆北缘被动陆缘过渡阶段—南北对冲前陆定型阶段—滨太平洋弧后陆内调整四个阶段。南黄海盆地属于台地—断拗复合地质结构,中、新生代为具有盆内隆起带的断陷箕状结构,且中、新生代多期构造运动在盆地原型改造和后期沉积发育上起着至关重要的作用,尤其印支—燕山早期运动、燕山中期黄桥运动和喜马拉雅期盐城运动与盆地地层变形、沉积发育、断裂发育及构造样式等盆地要素演化密切相关,进而导致盆地垂向地质结构和构造变形的层次性极为显著,而中生代燕山期和新生代喜马拉雅期两期构造岩浆活动则与滨太平洋域的动力学背景相关。  相似文献   

贺兰山及周边地区加里东运动研究   总被引：5，自引：1，他引：4  

许淑梅  冯怀伟  李三忠  李萌 《岩石学报》2016,32(7):2137-2150

基于对贺兰山及周边地区下古生界详细的野外地质调查,通过碎屑锆石年龄谱的物源分析、地层接触关系追踪、岩性岩相突变特征分析、残留地层分布、古生物组合及亲缘性分析,讨论了阿拉善地块与华北地块和中祁连地块的亲缘关系,探讨了研究区加里东运动的幕次,认为早古生代阿拉善地块和华北地块相互独立,俯冲造山特征建造不清晰,两者之间可能为转换型陆缘。阿拉善地块和中祁连地块之间的加里东运动幕次清晰。加里东运动一幕发生在中-晚寒武世,香山群深水复理石沉积和张夏组浅水碳酸盐台地相沉积呈拼合式接触,生物组合为亲华北-亲祁连混合型,彼时中祁连地块从Rodinia大陆裂离,逐步靠近阿拉善地块;加里东运动二幕发生在早-中奥陶世,下奥陶统碳酸盐岩在全区稳定分布,与下伏香山群不整合接触,与阿不且亥组整合接触,生物相统一,生物组合为华北型,中祁连地块-阿拉善地块-华北地块平和成为一个统一的块体,整体为浅水台地沉积环境;加里东运动三幕发生在奥陶纪末,中-上奥陶统与泥盆系角度不整合接触,商丹洋闭合,扬子地块与阿拉善地块和华北地块靠近,商丹缝合带南部的宽坪洋打开,导致研究区中、晚奥陶世亲华北-亲扬子混合型生物组合类型。  相似文献   

华北北缘东段开原地区三叠纪侵入岩年代学及岩石地球化学研究   总被引：3，自引：2，他引：1  

刘锦  刘正宏  李世超  赵辰  王楚杰  彭游博  杨仲杰  豆世勇 《岩石学报》2016,32(9):2739-2756

本文报道了位于华北北缘东段开原地区尖山子岩体、宝兴岩体和树德屯岩体的岩相学、岩石地球化学及年代学特征,探讨了上述岩体的形成时代、岩石成因及其构造环境。锆石U-Pb定年结果表明,尖山子岩体形成于251±1.3Ma,宝兴岩体形成于235±1.3Ma,树德屯岩体形成于224±1.9Ma,说明开原地区三叠纪存在早三叠世、中三叠世和晚三叠世三个时期的岩浆活动。尖山子岩体以二长花岗岩为主,具高硅低镁特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Hf、Zr等高强场元素;δEu=0.55~1.87,(La/Yb)N=6.23~47.9,轻重稀土分馏明显,富集轻稀土,亏损重稀土。宝兴岩体以花岗闪长岩为主,Si O2含量变化较大(52.36%~74.06%),Al2O3含量(14.5%~17.34%),Mg O含量(0.61%~3.66%),属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti等高强场元素;无明显的Eu异常,(La/Yb)N=6.81~25.6,轻重稀土分馏较明显,富集轻稀土,亏损重稀土。树德屯岩体以闪长岩为主,岩石具有低硅高镁特征,K2O/Na2O比值为0.33~0.76,显示富K贫Na特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti、Hf、Zr等高强场元素;无明显的Eu异常,(La/Yb)N=3.87~10.2,轻重稀土分馏不明显。上述岩石地球化学特征表明,尖山子岩体和宝兴岩体的原始岩浆起源于下地壳基性物质的部分熔融,树德屯岩体的原始岩浆起源于亏损的地幔楔。研究区三叠纪岩浆岩形成于造山阶段挤压环境下。华北北缘东段的挤压碰撞作用一直持续到晚三叠世(224Ma),而造山阶段向造山后阶段的构造转换(挤压地壳加厚向伸展垮塌的环境转换)发生于晚三叠世-早侏罗世(224~180Ma)期间。华北北缘东段中生代岩石圈减薄或破坏始于晚三叠世-早侏罗世(224~180Ma)期间。  相似文献   

朝鲜半岛古元古代摩天岭群的碎屑锆石U-Pb年龄及其地质意义   总被引：2，自引：1，他引：1  

廖鑫  张晓晖  金胜贤  朴雄  郑哲寿 《岩石学报》2016,32(10):2981-2992

克拉通内部活动带变质沉积建造蕴藏了早期超大陆形成中地体聚-散动力学过程的重要信息,碎屑锆石年代学则是揭示这种信息的最佳工具之一。针对华北(中-朝)克拉通最具代表性的古元古代活动带(辽-吉-朝活动带)中巨量沉积建造精细表征方面的空白区域,本文开展了朝鲜半岛检德地区摩天岭群的碎屑锆石年代学研究。SIMS U-Pb定年结果显示,北大川组变火山碎屑岩样品的锆石年龄谱记录了约2.53Ga的主要年龄峰值和约2.19Ga的最年轻峰值,说明北大川组开始沉积的时代应该晚于2.2Ga。南大川组变沉积岩样品碎屑锆石记录的最年轻峰值年龄为约2.02Ga,说明南大川组的沉积时代应该不早于2.02Ga;其锆石年龄谱记录了一个主要年龄峰值区域(2.02~2.18Ga)、一个次要年龄峰值(约2.46Ga)和一些2.78~3.30 Ga的古老年龄,指示其物质源区主要为同区古元古代地质体和邻近地体上的太古宙变质基底。区域对比表明,摩天岭群与中国境内辽吉活动带中的辽河群及集安群/老岭群具有基本一致的碎屑锆石年龄谱,说明它们不仅是同一时代的产物,而且分享类似的物质源区。这些时代一致、物源相近的沉积建造可以为甄别古元古代辽-吉-朝活动带的大地构造属性提供重要参考。与沉积年龄相近的碎屑锆石占据主导的碎屑锆石年龄谱反映了汇聚板块边缘各类盆地的典型特征,而相悖于大部分碎屑锆石年龄远大于地层沉积年龄的裂谷型盆地。  相似文献