Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications     

Q. Liu  Y.‐B. Wu  H. Wang  S. Gao  Z.‐W. Qin  X.‐C. Liu  S.‐H. Yang  H.‐J. Gong 《Journal of Metamorphic Geology》2014,32(2):177-193

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.  相似文献   

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest          下载免费PDF全文

Teresa Margarita González‐Martínez  Guadalupe Williams‐Linera  Friso Holwerda 《水文研究》2017,31(5):1174-1183

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.  相似文献   

Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach     

Setareh Khaleghi  Mohammad Parvin Nia 《水文科学杂志》2013,58(13-14):1967-1975

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.  相似文献   

渝东南下古生界页岩构造裂缝形成及分布控制因素          下载免费PDF全文

岳锋  程礼军  焦伟伟  王飞 《地质科学》2016,(4):1090-1100

天然裂缝对页岩气储集和渗流有重要影响,但目前对页岩构造裂缝研究不够深入。本文通过露头、岩心裂缝观察和分析,探讨了渝东南下古生界页岩构造裂缝类型、形成机理及分布控制因素。基于裂缝特征及力学成因,将剪切裂缝分为高角度剪切裂缝、倾斜滑脱裂缝和水平滑脱裂缝。倾斜滑脱裂缝是在上覆岩层重力和水平构造应力共同作用下沿应力集中的软弱面发生剪切滑动形成,水平滑脱裂缝是在构造挤压应力作用条件下主要沿页理面方向的剪切或层间滑动形成;页理发育程度及岩层曲率是控制水平滑脱裂缝形成的关键因素,岩石矿物组成、构造作用及岩层厚度是控制其它类型构造裂缝形成和分布的主要因素,页岩岩石力学层的划分需要根据裂缝特征、岩性变化特征、岩石力学参数及沉积界面等综合确定,岩层厚度与层间构造裂缝密度呈负相关关系。  相似文献   

四川盆地西南部第三纪盆地原型及其演化          下载免费PDF全文

黄涵宇  何登发 《地质科学》2016,(2):354-383

第三纪是四川盆地大范围陆相沉积历史的最后阶段, 同时又是四川盆地重要的构造定形期.探究该时期原型盆地沉积充填规律与构造演化特征, 是揭示四川盆地形成演化过程, 还原其古地理、古气候演变的关键.在综合利用古地磁、地震、野外露头等资料的基础之上, 从盆-山结合的角度出发, 以地质历史时间为主要线索, 对第三纪原型盆地分阶段、分区域地进行了动态化分析研究.重建了各沉积时期原型盆地构造-古地理格局, 分析了盆地沉积充填规律并复原了不同阶段沉积相带的空间展布特征.主要受周缘山系逆冲推覆作用产生的构造负载和盆地基底构造的影响, 第三纪时期四川盆地沉积范围局限于西南部、南部地区, 以河、湖沉积环境为主, 处于持续地挤压、充填过程而具有萎缩消亡的趋势.现今残余第三系地层由老到新, 主要由名山组、芦山组、大邑砾岩组等地层组成(先后经历了: 受造山带挤压推覆作用和温暖干旱气候等因素影响, 发育湖盆边缘冲积扇和沙漠沉积环境, 处于快速沉降阶段的名山组沉积时期; 以及构造活动相对稳定, 湖盆面积不断减小, 以沙泥质沉积互层为特征的芦山组沉积时期; 和沿山前带由南向北迁移, 以发育大型冲积扇为特征的大邑砾岩组沉积时期).纵观整个第三纪构造演化历史, 反映出四川盆地西南部地区在第三纪时期表现为典型的陆内坳陷沉积盆地性质.同期的大地构造活动和气候变化等因素对原型盆地的形成与演化起到了重要的控制作用, 同时也对该时期盆地古地理格局和沉积充填规律产生了重要影响.  相似文献   

下扬子南黄海沉积盆地构造地质特征   总被引：6，自引：0，他引：6  

庞玉茂  张训华  肖国林  温珍河  郭兴伟  侯方辉  朱晓青 《地质论评》2016,62(3):604-616

南黄海盆地作为下扬子块体之上的大型叠合盆地,海相构造层保存完整,陆相断拗构造层也较为发育,盆地地质结构复杂,构造变形强烈,利用最新的地质地球物理资料和解释成果,对低勘探程度的南黄海盆地进行了研究,认为盆地演化大致经历了克拉通被动陆缘初始发育阶段—南缘前陆北缘被动陆缘过渡阶段—南北对冲前陆定型阶段—滨太平洋弧后陆内调整四个阶段。南黄海盆地属于台地—断拗复合地质结构,中、新生代为具有盆内隆起带的断陷箕状结构,且中、新生代多期构造运动在盆地原型改造和后期沉积发育上起着至关重要的作用,尤其印支—燕山早期运动、燕山中期黄桥运动和喜马拉雅期盐城运动与盆地地层变形、沉积发育、断裂发育及构造样式等盆地要素演化密切相关,进而导致盆地垂向地质结构和构造变形的层次性极为显著,而中生代燕山期和新生代喜马拉雅期两期构造岩浆活动则与滨太平洋域的动力学背景相关。  相似文献   

断代成矿单元研究划分 ----以陕西省成矿单元划分为例     

董王仓  李新林  陈丽蓉  王娅娅  白小鸟 《地质论评》2016,62(S1):207-208

随着地质找矿难度的日益加大,如何科学地圈定找矿靶区,已成为新时期矿产勘查部署及实现找矿突破的关键。成矿单元划分是区域成矿规律研究的基础性工作,在圈定找矿靶区、部署矿产勘查工作中起着重要作用。目前国内成矿单元划分的主要方法是以区域内成矿作用最强、矿床最多的构造旋回所形成的地质构造单元为基础,同时考虑其它构造旋回形成的矿床分布状况而进行成矿单元划分,即采用综合方法划分成矿单元（陈毓川等,2007.徐志刚等,2008.）。对于仅发育单一构造演化阶段或多数矿床形成于某一主要构造阶段的区域而言,上述划分思路和方案基本反映了成矿地质背景及矿产分布规律。但对于发育多个构造演化阶段或多旋回造山带的区域（如陕西省）而言,其矿产众多且形成于多个构造演化阶段,综合方法所划分的成矿区带则较难客观、清晰地反映其成矿背景及矿产分布规律。陕西省多年来的矿产勘查实践表明,成矿单元的划分应从本省多旋回构造演化、多阶段成矿作用的实际出发开展断代成矿单元划分,从而清晰地反映各构造演化阶段的成矿特征及矿床分布规律,以满足新时期地质找矿工作的需求。  相似文献   

基于GeoSOT剖分编码的不动产单元统一标识模型研究     

宋树华  董芳  陈东  赵金玲  李滨  张乐  王希营  李世忠  翟卫欣  孙忠秋 《测绘学报》2016,45(Z1):99-105

针对现有不动产单元编码存在空间位置信息模糊的问题,以寻求更加直接反映空间位置的不动产编码为目标,在对现有不动产单元编码深入研究的基础上,提出了基于GeoSOT网格编码的不动产单元模型、编码方法,以及该模型与空间位置信息转换方案。试验证明,基于GeoSOT的不动产单元编码更加直观,具有很好的实用性。  相似文献   

边坡单元的SAR数据特征     

黄佳璇  杜伟超  王立伟  谢谟文 《测绘科学》2016,41(10):111-114,180

针对传统D-InSAR技术以栅格单元为研究对象而无法充分反映地形条件的问题,该文提出了以边坡单位为研究对象的D-InSAR数据特征分析。通过基于边坡单元的区域地形因子与后向散射系数和相干系数关系的分析方法,建立了研究区域SAR数据的可信区域滤波方法,提取出了研究区域SAR数据分析结果的可信区域。该方法提高了SAR数据的有效性,为滑坡早期监测提供了可靠的数据基础。通过对金沙江乌东德区域的SAR数据实例分析,验证了该方法的实用性。  相似文献   

中心内缩综合元的水深自动综合模型     

王沫  李树军  金绍华 《测绘科学》2016,41(10):176-180

针对水深自动综合问题,该文在满足水深综合的特殊要求并保持综合前后水深分布空间一致性的基础上,利用Voronoi图工具,采用定性和定量分析方法,建立了相应的综合规则和控制流程,设计了一种中心内缩综合元的水深自动综合模型,并进行了实验验证。实验结果表明,该模型可以在保证水深综合质量的前提下,实现流程的自动化。  相似文献