回收法治理锯条厂氰化物污水     

柳宪民  董振芳 《海岸工程》1995,14(2):38-41

在采用回收法治理锯条厂氰化物污水中，通过改造生产工艺，减少污水量，提高氰化物浓度及污水经除油后减压蒸馏，可回收５０％～９０％的氰化铂，其他盐分也可全部回收，从污水中蒸出的蒸馏水能在系统内循环使用。  相似文献   

迎风有限元法在三维潮流数值模拟中的应用   总被引：4，自引：0，他引：4  

董文军  陈虹 《海洋与湖沼》1997,28(3):320-327

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特  相似文献   

三峡大坝会减小东海的上升流和生产力吗?——与陈镇东先生商榷     

王保栋  孙霞 《海洋科学进展》2007,25(3):362-365

针对陈镇东先生于《Geophys.Res.Lett.》2000年27卷3期提出的"三峡大坝将减小东海的上升流并降低东海生产力"的观点认为,陈先生在其方法的适用性、严密性和观测事实等方面尚存在一些有待商榷之处。研究分析表明,三峡大坝不仅不会减少长江的年径流量,不会减小东海的上升流,反而可通过减少长江泥沙入海通量而增加近岸水体的光可得性,从而提高长江口及东海近岸海域的初级生产力。  相似文献   

一种带自由面的三维船体贴体网络的数值生成     

李廷秋  缪国平  刘应中 《海洋工程》1996,(1)

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的  相似文献   

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves     

Chuel-Hyun Kim  Chang-Ho Lee  Ja-Sam Goo   《Ocean Engineering》2007,34(11-12):1680-1689

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.  相似文献   

Three‐dimensional simulation of tsunami run‐up around conical island     

Byung Ho Choi  Dong Chule Kim  Efim Pelinovsky  Seung Buhm Woo 《Coastal Engineering》2007

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.  相似文献   

From 2D TO 3D Through Modelling Based On A Single Image     

Diego  Gonzalez-Aguilera  Javier  Gomez-Lahoz 《The Photogrammetric Record》2008,23(122):208-227

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.  相似文献   

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals   总被引：19，自引：8，他引：11  

Yanming Feng 《Journal of Geodesy》2008,82(12):847-862

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.  相似文献   

三峡库区高切坡致灾因素及防护对策——以重庆市万州区为例   总被引：1，自引：0，他引：1  

祝介旺  和海芳  柏松  伍法权 《中国地质灾害与防治学报》2008,19(2):7-11

三峡库区百万移民的搬迁建设导致大量高切坡的形成。未及时治理或治理不当的高切坡,不同程度地发生破坏,影响了人们的正常生活,甚至引发了地质灾害。因此,科学认识及治理高切坡十分必要。重庆市万州区高切坡主要有风化及差异风化、崩塌和土体滑塌等破坏形式。影响破坏的因素主要为工程地质条件、气候及时间效应。针对高切坡不同的破坏形式,以安全、经济及环境和谐的人文理念作为设计指导思想,充分论证了高切坡的防护方案,即：削坡、排水以及格构防护较适合万州区高切坡的防护。这些措施,既能很好地解决高切坡的防护问题,又能兼顾环保、降低造价。研究结果可以作为三峡地区高切坡类地质灾害防护设计的参考。也可为其它流域类似问题借鉴。  相似文献   

三峡水库区兴山后坝滑坡成因分析   总被引：2，自引：0，他引：2  

艾飞  侯天顺  关国杰 《中国地质灾害与防治学报》2008,19(3):1-5

文章通过对三峡水库区兴山后坝滑坡的地质、结构及变形特征研究以及稳定性分析,阐明了该滑坡成因和影响因素。研究发现,滑坡活动主要受地形地貌、地层岩性、人类工程活动以及降雨等因素的影响。运用剩余推力法对比分析天然及暴雨条件下不同层位的滑坡稳定性系数,得出在暴雨作用下滑坡表层滑带稳定性系数最小,不同滑带的稳定性受降雨的影响也各不相同,呈表层〉浅层〉深层的规律;这主要受滑带土的粘土矿物组分的影响。  相似文献