排序方式： 共有73条查询结果，搜索用时 15 毫秒
31.
Hyperpycnal flows are generated in the marine environment by sediment-laden fresh water discharge into the ocean. They frequently form at river mouths and are also generated in proximal ice-melting settings and are thought to be responsible for transporting a large proportion of suspended river sediment onto and off the continental shelf. Hyperpycnal flows are an example of gravity currents that display reversing buoyancy. This phenomenon is generated by the fresh water interstitial fluid being less dense than that of the ambient seawater. Thus after sufficient particles are sedimented the flow can become positively buoyant and loft, forming a rising plume. Here we present results from physical scale-modelling experiments of lofting gravity currents upon interaction with topography. Topography, in the form of a vertical obstacle, triggered a localised lofting zone on its upstream side. This lofting zone was maintained in a fixed position until the bulk density of the flow had reduced enough to allow lofting along its entire length. The obstructed lofting zone is associated with a sharp increase in deposit thickness. By inference these experimentally established lofting dynamics are applied to improve understanding of the potential for hyperpycnal flows to deposit deep-water massive sands. This study provides a depositional mechanism by which large volumes of sand can be deposited in the absence of traction and the fines removed, leaving thick deposits of structureless sand with a low percentage of mud. This conceptual model for the first time provides a framework by which the geometries of certain deep-water massive sands may be predicted within specific depositional and basinal settings. This is crucial to our understanding of massive sand deposits in modern and ancient turbiditic systems and in the commercial evaluation of hydrocarbon potential of such sedimentary successions. 相似文献
32.
Chen Jiang 《东北亚地学研究》2001,(1)
IntroductionTurbidite type ore deposits are those whose hostrocks are turbidites. Metallogenetically turbidite,the product of turbid flow, is of the same meaning offlysch. Turbid flow can form turbidite and turbiditetype ore deposits due to its strong tra… 相似文献
33.
Christopher J. Stevenson Peter J. Talling Douglas G. Masson Esther J. Sumner Michael Frenz Russell B. Wynn 《Sedimentology》2014,61(4):1120-1156
Grain‐size breaks are surfaces where abrupt changes in grain size occur vertically within deposits. Grain‐size breaks are common features in turbidites around the world, including ancient and modern systems. Despite their widespread occurrence, grain‐size breaks have been regarded as exceptional, and not included within idealized models of turbidity current deposition. This study uses ca 100 shallow sediment cores, from the Moroccan Turbidite System, to map out five turbidite beds for distances in excess of 2000 km. The vertical and spatial distributions of grain‐size breaks within these beds are examined. Five different types of grain‐size break are found: Type I – in proximal areas between coarse sand and finer grained structureless sand; Type II – in proximal areas between inversely graded sand overlain by finer sand; Type III – in proximal areas between sand overlain by ripple cross‐laminated finer sand; Type IV – throughout the system between clean sand and mud; and Type V – in distal areas between mud‐rich (debrite) sand and mud. This article interprets Types I and V as being generated by sharp vertical concentration boundaries, controlled by sediment and clay concentrations within the flows, whilst Types II and III are interpreted as products of spatial/temporal fluctuations in flow capacity. Type IV are interpreted as the product of fluid mud layers, which hinder the settling of non‐cohesive grains and bypasses them down slope. Decelerating suspensions with sufficient clay will always form cohesive layers near to bed, promoting the generation of Type IV grain‐size breaks. This may explain why Type IV grain‐size breaks are widespread in all five turbidites examined and are commonplace within turbidite sequences studied elsewhere. Therefore, Type IV grain‐size breaks should be understood as the norm, not the exception, and regarded as a typical feature within turbidite beds. 相似文献
34.
The relationship of sea-level changes and short-term climatic changes with turbidite deposition is poorly documented, although the mechanisms of gravity-driven sediment transport in submarine canyons during sea-level changes have been reported from many regions. This study focuses on the activity of the Dakar Canyon off southern Senegal in response to major glacial/interglacial sea-level shifts and variability in the NW-African continental climate. The sedimentary record from the canyon allows us to determine the timing of turbidite events and, on the basis of XRF-scanning element data, we have identified the climate signal at a sub-millennial time scale from the surrounding hemipelagic sediments. Over the late Quaternary the highest frequency in turbidite activity in the Dakar Canyon is confined to major climatic terminations when remobilisation of sediments from the shelf was triggered by the eustatic sea-level rise. However, episodic turbidite events coincide with the timing of Heinrich events in the North Atlantic. During these times continental climate has changed rapidly, with evidence for higher dust supply over NW Africa which has fed turbidity currents. Increased aridity and enhanced wind strength in the southern Saharan-Sahelian zone may have provided a source for this dust. 相似文献
35.
The Middle to Upper Jurassic Todagin assemblage in northwestern British Columbia, Canada, was deposited in the Bowser Basin above arc-related rocks of the Stikine terrane. Sedimentary structures indicate that a variety of gravity flow processes were involved in transport and deposition in deep-water slope environments. At Mount Dilworth, laterally continuous and channelized turbidites are interbedded with and overlain by mass-transport deposits in which sedimentary clasts are supported in a mudstone matrix. More than 50% of the succession consists of mass-transport deposits, indicating significant slope instability. A 300 m thick mass-transport complex exposed near the top of the succession is interpreted to result from tectonic activity, which triggered a major change in sediment supply from a local source area. At Todagin Mountain, a channel complex displays three successive channel-fills with associated overbank sedimentation units. Mass-transport deposits are rare, and confined to channel axes. Channels 1 and 2 are characterized by 40-50 m thick, ungraded pebble clast-supported conglomerate while the uppermost Channel 3 contains graded beds and occasional traction structures. The gradual change from erosive and amalgamated channel deposits at the base, to more aggradational channels at the top, is related to elevation of the equilibrium profile. Creation of accommodation favored aggradation on the mud-dominated slope succession and construction of well-developed channel-levee systems. The vertical succession exposed at Todagin Mountain is consistent with normal progradation of the slope under high sedimentation rates. In the Mount Dilworth area, extensional faulting associated with development of the restricted Eskay rift in the early Middle Jurassic produced a dissected basement above which the Todagin assemblage was deposited. These structures were inverted during collision of the Stikine and Cache Creek terranes, and likely played a major role in the stratigraphic evolution of the deep-water architectures. 相似文献
36.
Mapping geological details and interpreting three-dimensional geometries in a highly heterogeneous outcrop such as the exposure at Big Rock Quarry has been a continuous challenge especially because high vertical cliffs make access to most of the rocks difficult for direct geological observations. Previous interpretations of facies architecture were derived from gamma-ray profiles, a core and measurements made on two-dimensional photomosaics. This paper represents the first attempt of three-dimensional interpretation of the geometry and facies pattern of the Jackfork nested channel complex deposited at the base-of-slope.Examination of the photo real model of the outcrop with assigned lithologies allowed extraction of accurate 3-D qualitative, as well as quantitative (channel dimensions) geometric information. This facilitated interpretation and reconstruction of the submarine channel complex architecture making possible correlations of strata exposed on the two sides of the quarry.Most of the exposed vertically and laterally stacked channels are large, aggradational with well-defined axial regions overlain by matrix-supported breccia which grades upward into amalgamated sandstones. The thickness of the sandstone decreases toward the southeastern end of the quarry where more shale is present. The channel infill consists of thin-bedded sandstones interlayered with shale which overlain the breccia. The upper part of the quarry is made up of smaller, lateral migrating channels.Significant channel width and thickness variation can be recognized at outcrop scale. Thirty-eight identified channels are characterized by a relatively low aspect ratio (4:1 to 32:1) with channel dimensions ranging from 25 m to 314 m wide and 2 m-24 m deep. Bed thickness distributions of various facies show that the sandstone comprises a significant proportion (83%) of the total channel thickness, while shale and breccia represent about 8%, and 17% respectively. This yields a high net-to gross ratio of more than 80%.Compared to previous reconstructions our 3-D photo real model is more accurate and it can be used to calibrate simulation of processes in deep-water environments. 相似文献
37.
北山造山带是研究中亚造山带增生造山的关键地区之一,浊积岩是增生造山带的重要组成部分。北山古生代浊积岩主要出露于营毛沱、柳园和黑山口地区。营毛沱浊积岩发育于下奥陶统,古水流方向由南向北,内部砂岩具中高等风化程度的长英质源区,构造背景为被动陆缘。早二叠世柳园浊积岩内部砂岩具低到中等风化程度的中基性源区,构造背景为大洋岛弧。早二叠世黑山口浊积岩中的砂岩源区具中等风化程度,环境相对柳园砂岩较为稳定,和长英质源区的沉积岩具相似性,构造环境可能为活动陆缘弧。对北山古生代浊积岩的解剖揭示北山古生代经历了复杂的俯冲增生过程。早古生代花牛山-火石山一带发育向北的俯冲,火石山南部被动陆缘形成营毛沱浊积岩,之后的俯冲带局部后撤形成泥盆纪墩墩山岛弧。柳园地区晚古生代洋壳向花牛山和石板山岛弧带俯冲分别形成了柳园和黑山口浊积岩。本研究支持北山增生时间持续到早二叠世的观点,对认识天山、索伦缝合带的衔接对比研究具有重要的意义。 相似文献
38.
Shelf-edge deltas (SEDs) forming during periods of relative sea level fall and lowstand are generally efficient in transferring sediments to the slope and basins, and their identification in subsurface data is often considered a good indication of coeval development of slope and basin-floor turbidite reservoirs. This study investigates the seismic stratigraphic evolution of a forced-regressive and normal regressive shelf-edge delta (Bonaparte SED) that accumulated on the edge of the NW Australian margin during the late Quaternary. High resolution 2D and 3D reflection seismic data allow reconstruction of the main episodes of delta progradation and understanding of the extrinsic and intrinsic controls on their deposition. The lack of a significant turbidite system forming off the shelf-edge delta throughout the Quaternary is a striking feature of the Bonaparte SED. Instead, slope sedimentation is dominated by the accumulation of plume-derived mud belts and their reworking through mass-transport processes. Seismic geomorphology permits interpretation of the process regime of the youngest shelf-edge depocentre by applying a new process-based shallow-marine classification scheme to the 3D seismic attribute data. Results suggest either a tide or wave dominated delta with fluvial processes being of tertiary significance. A tide or wave-dominated, fluvial-affected shelf-edge delta classification is consistent with the paleogeographical reconstruction of the margin during the last glacial maximum (ca. 25 ka BP). The comparison of this mixed-process shelf-edge delta and starved slope system with a fluvial-dominated counterpart with significant sandy slope deposits emphasizes the potential of assessing the process regime of shelf-edge deltas as a rapid, first approach for predicting the presence or absence of coeval slope and basin-floor reservoirs. 相似文献
39.
L. MallikR. Mazumder B.S. MazumderM. Arima P. Chatterjee 《Marine and Petroleum Geology》2012,30(1):43-49
Tidal rhythmites have been documented from modern continental shelves and distal offshore settings. In significant contrast to their modern counterparts, sedimentological studies of ancient tidal rhythmites formed in distal offshore settings and quantification of tidal rhythms encoded therein are, however, scarce. This paper presents sedimentological analysis of vertically accreted tidal rhythmites from the Palaeoproterozoic Chaibasa shale facies in India, and quantification of their tidal rhythms. The facies characteristics of the Chaibasa Shale coupled with harmonic analysis of the laminae thicknesses of the sandstone inter-layers corroborate a distal shelf palaeogeography for the generation of the vertically accreted tidal rhythmites. The latter are the distal counterparts of laterally accreted, tidal “bundle” deposits, well preserved within the shallow marine Chaibasa sandstones. The number of lunar days in a synodic month (∼23) estimated from the Chaibasa shale facies is, however, considerably lower than that estimated from the Chaibasa sandstone facies (∼32) suggesting that the tidal record encoded from the Chaibasa shale facies is incomplete. 相似文献
40.
The Lower Cretaceous Knurr Sandstone deposited along the southern slope of Loppa High and overlain by the Kolje and Kolmule seals forms an attractive play in the Hammerfest Basin of the Barents Sea. Late Jurassic organic-rich Hekkingen shale directly underlies the Knurr Sandstone and acts as a source to provide effective charge. Three wells, 7120/2-2, 7122/2-1 and 7120/1-2, have proven the Knurr-Kolje play in structural traps, with an oil discovery in 7120/1-2. Prospectivity related to stratigraphic traps is, however, highly under-explored.In order to document and map the reservoir distribution and stratigraphic-trap fairway, the Lower Cretaceous sedimentary package containing the Knurr Sandstone is divided into a number of depositional sequences and systems tracts using key regional seismic profiles calibrated with logs. Mapping of the key surfaces bounding the Knurr sandstone has been carried out using all the seismic vintages available from Norwegian Petroleum Directorate (NPD).The thick massive nature of the sandstone (123 m in well 7122/2-1), sedimentary features characteristic of gravity flow deposits, high-resolution internal seismic reflections and stratal geometries (truncations and lapout patterns), and sequence stratigraphic position of the Knurr Sandstone on seismic profiles confirm that the lobes identified on the seismic section are gravity driven base of the slope lobes. These Knurr lobes and slope aprons were formed as a result of uplift of the Loppa paleo-high in the Late Jurassic to Early Cretaceous times which caused subaerial exposure and incision. The characteristic mounded, lobate geometry evident on the seismic can be mapped along the toe-of-slope and records multiple stacked lobes fed by multiple feeder canyons. Lateral partitioning and separation of the lobes along the toe-of-slope could potentially create stratigraphic traps. The existing 2D seismic coverage is, however, not sufficient to capture lateral stratigraphic heterogeneity to identify stratigraphic traps. 3D seismic coverage with optimum acquisition parameters (high spatial and vertical resolution, appropriate seismic frequency and fold, long offsets and original amplitudes preserved) can allow for the reconstruction of 3D geomorphologic elements to de-risk potential stratigraphic traps prior to exploratory drilling. 相似文献