贺兰山及周边地区加里东运动研究   总被引：5，自引：1，他引：4  

许淑梅  冯怀伟  李三忠  李萌 《岩石学报》2016,32(7):2137-2150

基于对贺兰山及周边地区下古生界详细的野外地质调查,通过碎屑锆石年龄谱的物源分析、地层接触关系追踪、岩性岩相突变特征分析、残留地层分布、古生物组合及亲缘性分析,讨论了阿拉善地块与华北地块和中祁连地块的亲缘关系,探讨了研究区加里东运动的幕次,认为早古生代阿拉善地块和华北地块相互独立,俯冲造山特征建造不清晰,两者之间可能为转换型陆缘。阿拉善地块和中祁连地块之间的加里东运动幕次清晰。加里东运动一幕发生在中-晚寒武世,香山群深水复理石沉积和张夏组浅水碳酸盐台地相沉积呈拼合式接触,生物组合为亲华北-亲祁连混合型,彼时中祁连地块从Rodinia大陆裂离,逐步靠近阿拉善地块;加里东运动二幕发生在早-中奥陶世,下奥陶统碳酸盐岩在全区稳定分布,与下伏香山群不整合接触,与阿不且亥组整合接触,生物相统一,生物组合为华北型,中祁连地块-阿拉善地块-华北地块平和成为一个统一的块体,整体为浅水台地沉积环境;加里东运动三幕发生在奥陶纪末,中-上奥陶统与泥盆系角度不整合接触,商丹洋闭合,扬子地块与阿拉善地块和华北地块靠近,商丹缝合带南部的宽坪洋打开,导致研究区中、晚奥陶世亲华北-亲扬子混合型生物组合类型。  相似文献   

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin     

《Marine and Petroleum Geology》2016

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.  相似文献   

A new model of edge-to-edge contact for three dimensional discontinuous deformation analysis     

M. Mousakhani  A. Jafari 《Geomechanics and Geoengineering》2016,11(2):135-148

A robust contact theory can be regarded as key to three dimensional discontinuous deformation analyses (3D-DDA). Not only must this theory provide an efficient algorithm to judge the type and location of contacts but also it must be able to present comprehensive formulations for every kind of contact (open, sliding and locked contact). There are six types of contact in three dimensional discontinuous deformation analyses (vertex-to-vertex, vertex-to-edge, vertex-to-face, edge-to-edge, edge-to-face and face-to-face) that can be converted to vertex-to-face and edge-to-edge contacts. This paper presents a new model of edge-to-edge contact to three dimensional discontinuous deformation analyses (3D-DDA). This new model considers both kinds of edge-to-edge contact (cross-over and parallel edge-to-edge contact) and presents a criterion for inter-penetration. Sub matrices of normal and shear spring and friction force are derived by geometrical analysis and penalty method. This new model is implemented in a 3D-DDA computer programme, and the example results demonstrate the validity of the model.  相似文献   

Sinian-Cambrian Tectonic Framework in the Tarim Basin and its Influences on the Paleogeography of the Early CambrianEI北大核心CSCD     

Yan W.  Wu G.  Zhang Y.  Yang G.  Lou H.  Wang X. 《大地构造与成矿学》2018,(3):455-466

Due to strong remodification and sparse trace remnants, tectonic restoration is critical for the reconstructing of the paleography and basin-prototype in the multiple-cycles superimposed basin, which is also fundamental for the hydrocarbon exploration of the deep marine carbonate in the Tarim Basin. This study presents the tectonic framework of the transition phase from the Sinian to the Cambrian Period and its constrains on the paleography of the Cambrian in the Tarim Basin based on comprehensive analysis of new geochronology data, seismic data and regional tectonic data. The results showed that (1) there is a large regional unconformity between the Cambrian and Precambrian, suggesting a discontinuous deposition from the Sinian to the Cambrian that is contrary to the major view; (2) a broad flattened paleotopography formed before Cambrian Period, which is favorable for the wide epicontinental sea environment and a gentle homoclinal ramp platform development in the early Cambrian, and the residual basement low relief uplifts that influence the microfacies differentiation in the carbonate platform; (3) the Cambrian carbonate platform has been involved much into the marginal orogenic belts, and the proto-platform is probably of 200 km out of the present basin in S-N direction; (4) there is a weak extensional setting in the Cambrian-Early Ordovician rather than a strong rifting setting with a large aulacogen into the platform, in which a inter-platform shallow depression and stable ramp platform developed in the Cambrian; (5) there is not troughs, but rather low relief uplifts developed in the Early Cambrian in the southwestern Tarim Basin, and lack of large uplifts along the carbonate platform margins; (6) it is showed a broad architecture of platform-wide slope-ocean basin from the inner Tarim plate to its margin in the Cambrian Period. Considering the basin prototype, the restoration of the tectono-paleography in the early Cambrian in the Tarim Basin is distinct from those of the previously proposed. We propose that a gentle pattern with “two platforms and one inter-depression” in E-W striking other than multiple small platform constrained in the basin, and further subdivision of the western platform with inner platform low uplift and sag in N-S striking, which is possibly inherited from the basement architecture. On the outer of the united platform, there is probably broad gentle slope for transition to ocean basin. We therefore argue that tectonic restoration is crucial for reconstruction of the paleogeography and basin prototype, especially for basins experienced multiphase of tectonic cycles. © 2018, Science Press. All right reserved.  相似文献   

Particle manifold method (PMM): A new continuum‐discontinuum numerical model for geomechanics     

L. Sun  G.F. Zhao  J. Zhao 《国际地质力学数值与分析法杂志》2013,37(12):1711-1736

Particle manifold method (PMM) is a new extension of the numerical manifold method (NMM). PMM uses a mathematical cover system to describe the motion and deformation of a particle‐based physical domain. By introducing the concept of particle into NMM, PMM takes the advantages of easy topological and contact operations with particles. In this article, the methodology, formulations and implementation of the method are presented, together with modelling examples for validation. It is found that good solutions for both continuous and discontinuous problems are obtained by the new developed PMM. Due to the underlying coupled continuum‐discontinuum property of PMM, it has great potential for modelling of geomechanical problems. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Improving performances of ITO/GaP contact on AlGaInP light-emitting diodes     

李春伟  朱彦旭  沈光地  张勇辉  秦园  高伟  蒋文静  邹德恕 《海洋学报(英文版)》2010,29(9)

In this paper AlGaInP light emitting diodes with different types of electrodes: Au/Zn/Au-ITO Au/Ti-ITO Au/Ge/Ni-ITO and Au-ITO are fabricated. The photoelectricity properties of those LEDs are studied. The results show that the Au/Zn/Au electrode greatly improves the performance of LEDs compared with the other electrodes. Because the Au/Zn/Au electrode not only forms a good Ohmic contact with indium tin oxide (ITO), but also reduces the specific contact resistances between ITO and GaP, which are 1.273×10^-6 Ω · cm² and 1.743×10^-3 Ω ·cm² between Au/Zn/Au-ITO and ITO-GaP respectively. Furthermore, the textured Zn/Au-ITO/Zn electrode is designed to improve the performances of LEDs, reduce the forward-voltage of the LED from 1.93 to 1.88 V, and increase the luminous intensity of the LEDs from 126 to 134 mcd when driven at 20 mA.  相似文献   

Re‐establishment of soil water repellency after destruction by intense burning in a Mediterranean heathland (SW Spain)     

Antonio Jordán  Félix A. González  Lorena M. Zavala 《水文研究》2010,24(6):736-748

Soil water repellency has been conventionally considered as a fire‐induced effect, but an increasing number of studies have suggested that natural background repellency occurs in many soil types, and many of them have suggested that water repellency can be re‐established over time after being destroyed. An experimental fire was conducted to study changes of the soil surface during the first 18 months following intense burning. The main objectives of this paper are as follows: (1) to investigate in situ water repellency changes at three soil depths (0, 2 and 4 cm) immediately after burning; (2) to evaluate the medium‐term evolution of water repellency under field conditions; and (3) to outline the main hydrological consequences of these changes. Also, different water repellency tests (water drop penetration time, ethanol percentage test (EPT) and contact angle (CA) between water drops and the soil surface) were carried out for comparison purposes. Field experiments showed that soil water repellency was partly destroyed after intense burning. Changes were relatively strong at the soil surface, but diminished progressively with depth. Levels of water repellency were practically re‐established 18 months after burning. This suggests that water repellency in the studied area is not necessarily a consequence of fire, but can instead be a natural attribute. Finally, although limited in time, destruction of soil water repellency has important consequences for runoff flow generation and soil loss rates, and, indirectly, for water quality. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Influence of fluid chemistry on shear-wave attenuation and velocity in sedimentary rocks   总被引：2，自引：0，他引：2  

Dung Vo-Thanh 《Geophysical Journal International》1995,121(3):737-749

  相似文献   

湖北凤梨山铅锌矿床的闪锌矿标型特征及其成因探讨     

俞惠隆 《矿物岩石》1990,10(1):28-34,T002,T004

凤梨山铅锌矿产于中酸性岩浆岩与三叠系海相碳酸盐地层的热接触变质晕内。闪锌矿为主要的矿石矿物。其成矿作用可分为沉积成岩同生成矿期（I）、渗流热水成矿溶液改造富集成矿期（Ⅱ）和热接触变质成矿期（Ⅲ）。本文根据闪锌矿的地质产状、矿物共生组合及成矿作用的特点，对它进行了物理化和化学性质、矿物包裹体特征、硫与铅同位素地球化学的研究，并探讨了它的成因问题。  相似文献   

Contact-metamorphic effect on parameters for kerogen maturation     

Yoshihiro Uji 《Organic Geochemistry》1986,9(6)

This study examines the effect of contact metamorphism by an igneous dyke on parameters for kerogen maturation, such as elemental composition (H/C, O/C, N/C), ¹H-NMR T₁, vitrinite reflectance and infrared spectra. Although elemental composition and ¹H-NMR T₁ of the kerogen changed only within 1.5 and 5.0 m from the dyke respectively, vitrinite reflectance of the kerogen was thermally affected beyond 10.0 m from the intrusion. It is concluded that vitrinite reflectance is the most sensitive of the parameters evaluated to assess thermal stress of kerogens.  相似文献