GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献   

基于ABAQUS的深水连接器连接性能分析     

曹博  蔡志杰  石中玉  张玉龙  段梦兰 《海洋工程》2020,38(3):132-139

为解决现有深水连接器连接性能研究中力学分析建模不准确,且缺乏抗弯抗扭能力分析的问题,基于ABAQUS有限元分析软件对深水连接器进行三维模型动态仿真分析,对连接器的受力、密封性能以及在实际工程需求中不同内压下的抗弯及抗扭性能进行深入研究。结果表明:在安装及生产两种工况下,深水连接器各部件除密封环外受力均满足其强度设计要求,密封环接触表面发生合理塑性变形,满足密封要求;随着内压的增加,深水连接器的抗弯能力逐渐下降,抗扭能力则呈现增加的趋势;极限弯矩分别在0 MPa与35 MPa内压下的判定依据为密封失效,在14 MPa与52 MPa内压下的判定依据为下毂座屈服,而极限扭矩在不同内压下的判定依据均为密封失效。  相似文献   

High to ultrahigh temperature contact metamorphism and dry partial melting of the Tasiuyak paragneiss,Northern Labrador     

R. K. Mitchell  A. Indares  B. Ryan 《Journal of Metamorphic Geology》2014,32(6):535-555

Contact aureoles of the anorthositic to granitic plutons of the Mesoproterozoic Nain Plutonic Suite (NPS), Labrador, are particularly well developed in the Palaeoproterozoic granulite facies, metasedimentary, Tasiuyak gneiss. Granulite facies regional metamorphism (M_R), c. 1860 Ma, led to biotite dehydration melting of the paragneiss and melt migration, leaving behind biotite‐poor, garnet–sillimanite‐bearing quartzofeldspathic rocks. Subsequently, Tasiuyak gneiss within a c. 1320 Ma contact aureole of the NPS was statically subjected to lower pressure, but higher temperature conditions (M_C), leading to a second partial melting event, and the generation of complex mineral assemblages and microstructures, which were controlled to a large extent by the textures of the M_R assemblage. This control is clearly seen in scanning electron microscopic images of thin sections and is further supported by phase equilibria modelling. Samples collected within the contact aureole near Anaktalik Brook, west of Nain, Labrador, mainly consist of spinel–cordierite and orthopyroxene–cordierite (or plagioclase) pseudomorphs after M_R sillimanite and garnet, respectively, within a quartzofeldspathic matrix. In addition, some samples contain fine‐grained intergrowths of K‐feldspar–quartz–cordierite–orthopyroxene inferred to be pseudomorphs after osumulite. Microstructural evidence of the former melt includes (i) coarse‐grained K‐feldspar–quartz–cordierite–orthopyroxene domains that locally cut the rock fabric and are inferred to represent neosome; (ii) very fine‐ to medium‐grained cordierite–quartz intergrowths interpreted to have formed by a reaction involving dissolution of biotite and feldspar in melt; and (iii) fine‐scale interstitial pools or micro‐cracks filled by feldspar interpreted to have crystallized from melt. Ultrahigh temperature (UHT) conditions during contact metamorphism are supported by (i) solidus temperatures >900 °C estimated for all samples, coupled with extensive textural evidence for contact‐related partial melting; (ii) the inferred (former) presence of osumilite; and (iii) titanium‐in‐quartz thermometry indicating temperatures within error of 900 °C. The UHT environment in which these unusual textures and minerals were developed was likely a consequence of the superposition of more than one contact metamorphic event upon the already relatively anhydrous Tasiuyak gneiss.  相似文献   

长江经济带三大城市群城际客运联系网络结构对比分析     

涂建军  毛凯  况人瑞  李南羲 《世界地理研究》2021,30(1):69-79

“流空间”是人文-经济地理学关注的重要议题。基于城际客运交通流数据,运用ArcGIS空间分析、城市联系强度模型等方法对长江经济带长三角、长江中游、成渝三大城市群城际客运联系网络结构特征进行刻画,结果表明：①长三角城市群城际客运联系网络以上海市为主核心,苏州、南京、杭州为次核心,通过核心城市向外延伸的交通轴线组成相互之间联系紧密的城市网络,西部与南部地区的联系相对较弱;长江中游城市群城际客运联系网络以武汉、长沙、南昌三个省会城市为核心节点,周边次中心城市与其省会交通联系紧密,但城市间跨省联系较弱,本省城市仅与另外两个省会城市存在突出的向心性联系;成渝城市群高等级联系网络大多指向成都、重庆主城区,次级区域中心城市发育不足,成渝城市主轴线在强交通联系推动下发育成型,但川渝接壤地区的城际客运联系存在“断层”。②长江经济带三大城市群在网络化演化进程中,具有城市群“等级-网络”的基本演化特征,其中成渝城市群、长江中游城市群仍处于“核心-边缘”的双核或三核结构,长三角城市群已出现多核网络化发展趋势。③高速铁路作为新兴要素流,对公路、普通铁路等传统要素流具有明显的替代效应,增强了三大城市群核心城市向外延伸的轴线联系,是驱动城市群城际客运联系网络结构演变的新动力。  相似文献   

饱和冻土中弹性体波传播特性影响参数研究     

仇浩淼  夏唐代  郑晴晴  周飞 《岩土力学》2018,39(11):4053-4062

基于Leclaire对饱和双相孔隙弹性介质Biot模型的扩展,研究含有两种不同固相组分的三相多孔弹性介质中体波的传播特性。以饱和冻土为例,分析了各相体积分数、颗粒形状,接触参数等因素对波动方程中惯性参数、黏性参数、刚度参数的影响;对该三相介质模型进行了退化,分析了孔隙中只含液态水或固态冰时体波的特性;以饱和冻土为例,通过数值计算,探讨了饱和冻土中体波的相速度和衰减系数与胶结参数、接触参数、频率、饱和度、孔隙率等参数的关系。结果表明：与一般的饱和土不同,饱和冻土中存在5种体波,即3种纵波和2种横波;5种体波均具有弥散性和衰减性,且P1波、S1波弥散性和衰减性远小于P2、P3、S2波;胶结参数、饱和度、孔隙率对5种体波的传播特性影响显著,接触参数对传播特性影响较小。  相似文献   

磁场资料在西昆仑地区构造研究中的应用          下载免费PDF全文

林晓星  吴云  邹为雷 《中国地质调查》2017,4(6):83-88

通过研究磁场资料,对西昆仑地区的断裂展布以及塔里木地块与青藏块体之间的接触关系进行了分析,认为柯岗断裂并未被NW走向的克孜勒陶—库斯拉普断裂所截,而是柯岗断裂阻止了克孜勒陶—库斯拉普断裂继续向NW方向延伸; 利用2.5D专业软件,反演了塔里木地块与青藏块体之间的关系,结果显示,双向对冲模式更能获得磁场资料的支持。  相似文献   

基于要素流的长三角城市群空间布局     

顾雯娟  欧向军  叶磊  杨宝宝 《热带地理》2015,35(6):833-841

以长三角城市群30个地级市市区为研究单元,从要素流动的动态视角,建立要素流的数理模型,借助于ArcGIS软件,对长三角城市群内城市的经济流、交通流和信息流的强度和方向进行定量分析和评价,运用赋值法对3种要素流总量进行评分,并进行空间层级划分。得出核心区（包括上海、江苏沿江八市、环杭州湾地区等地市）和辐射影响区（位于长三角两翼的地市）。基于城市间的空间联系特征和城市群的空间层级结构,对长三角城市群的空间发展布局提出进一步引导和规划,即上海为核心,苏州、南京、杭州、合肥和徐州为区域性中心城市,构成以沪宁合、沪杭、沪徐和沪温为4个发展轴的反“K”字型的空间形态,依据城市区位和要素联系特征,将城市群进一步划分为6个城市组团,形成以中心城市为增长节点、以发展轴为联结线、以城市组团为发展域的“点―线―面”有序发展的空间互动格局。  相似文献   

水库诱发地震作用下三峡库区基岩地震动模拟     

游姗  孟庆筱  景鹏旭 《大地测量与地球动力学》2015,35(1):150-153

使用接触单元建立三峡库首区断裂展布有限元模型,使用确定性的设定地震方法,为时程分析提供合理的水库地震动输入。二维有限元水平基岩地震动模拟结果表明,九畹溪断裂发生M5.5级构造型水库地震时,三峡大坝场址水平向基岩PGA为175 Gal;而高桥断裂发生M5.5级地震时,巴东县城场址水平向基岩PGA为303 Gal。断裂带两侧PGA出现明显的不连续特征,场址基岩地震动参数的计算有必要考虑该影响。  相似文献   

粒间胶结接触力学特性的三维试验研究     

蒋明镜  金树楼  刘蔚  刘俊 《岩土力学》2015,36(Z1):9-13

为实现结构性砂土离散元接触模型合理性的三维试验验证,设计了一套可用于三维半球形理想胶结颗粒成型及实现不同加载条件下的接触力学特性测试装置,制备了一定胶结尺寸的环氧树脂半球形颗粒胶结试样,在一系列辅助加载装置中初步开展了不同加载条件（拉伸、压缩、剪切、弯转、扭转）下的力学性能测试。结果表明,该装置可用于实现三维情况下胶结颗粒接触力学特性测试;不同加载条件下的实测试验结果与二维试验成果基本一致;峰值剪切、弯矩、扭矩随着法向荷载的增大呈现先增大后减小的趋势,存在一个相同的临界法向荷载。  相似文献