龙门山平驿铺组沉积体系及旋回层序研究   总被引：5，自引：1，他引：5  

郑荣才  刘文均  李祥辉  王洪峰  陈源仁 《沉积学报》1997,(3)

本文首次从龙门山区下泥盆统平驿铺组中，划分出河口湾、三角洲、滨岸和陆棚四个沉积体系和三个Ⅲ级Ｔ－Ｒ旋回层序。平面上，四个沉积体系组成了扬子板块西侧的古大陆边缘由过渡相区和滨岸相区相间分布的古地理格局；垂向上，两相区中的三个Ⅲ级Ｔ—Ｒ旋回层序也由不同的沉积体系组成，旋回层序的演化虽然受构造差异沉降影响，但仍以Ⅲ级海平面升降变化为主要控制因素，并具同步演化规律，可分别代表古大陆边缘活动型和相对稳定型的两种Ⅲ级Ｔ—Ｒ旋回层序模式。  相似文献   

扬子板块石炭纪沉积层序及其全球性对比研究   总被引：8，自引：3，他引：8  

李儒峰  刘本培 《沉积学报》1997,15(3):23-28

通过对石炭纪扬子板块内部、扬子板块与华北板块及扬子板块与欧美板块之间的不同级别沉积层序对比研究，编制了扬子板块、华北板块和欧美板块石炭纪的海平面变化曲线。在扬子板块内部，上、下扬子区２级沉积层序可以进行对比，但下扬子区海进和海岸上超滞后于上扬子区，由于资料的限制，３级沉积层序的对比还有困难；华北板块Ｆｕｓｕｌｉｎａ－Ｆｕｓｕｌｉｎｅｌａ带内的一个３级沉积层序和Ｔｒｉｔｉｃｉｔｅｓ－Ｐｅｕｄｏｓｃｈｗａｇｅｒｉｎａ带内的四个３级沉积层序，可以和扬子板块同期的３级沉积层序对比；扬子板块和北美中大陆不仅３级沉积层序可以对比，而且在晚石炭世Ｇｚｈｅｌｉａｎ期４级沉积层序也可以进行对比，但由于它们大地构造背景的差异，导致沉积层序组成内容的不同。上述对比结果被认为是冰川型全球海平面变化所形成全球沉积记录同时性的证据。并以冰期与非冰期、联合古陆形成前后等方面对相同板块内和不同板块间沉积层序的数量和级别的异同原因进行了探讨，认为石炭纪冈瓦纳大陆冰川消长是控制全球海平面变化的主要因素，因此，沉积层序应具全球同时性和可对比性，但局部沉积条件差异也将影响沉积层序组成。  相似文献   

鹤岗盆地晚侏罗世石头河子组沉积环境及幕式聚煤作用   总被引：3，自引：0，他引：3  

杨子荣  姜剑虹 《沉积学报》1997,15(3):55-61

鹤岗盆地是一中-新生代内陆盆地，主要含煤地层上侏罗统石头河子组是一套非海相含煤地层，充填于盆地底部，自下而上可划分为三个岩性段，五个亚段和２６个含煤旋回。底部第一亚段沉积期以冲积扇、辫状河环境为主；第二亚段以河流环境为主；第三亚段以河流-三角洲-湖泊环境为主；第四亚段演化为河流环境；第五亚段则以河流、冲积扇环境为主。垂向上五个亚段对应于盆地的填平补齐-扩张-稳定沉降-差异沉降-收缩五个演化阶段。富煤带位于同沉积中心的侧翼，一般含砂率６０%～７０%的区域含煤性最好。含煤旋回受控于盆地周期性地快-慢沉降，聚煤作用发育于每期幕式沉降的缓慢稳定沉降阶段。厚-特厚煤层都与湖泊三角洲冲积平原大面积沼泽化有关。  相似文献   

华北地区下古生界沉积相和层序地层分析   总被引：3，自引：0，他引：3       下载免费PDF全文

韩征  何镜宇  王英华  余素玉 《地球科学》1997,6(3)

运用沉积学和层序地层学研究方法，结合生物地层学，在古地理格局演化和海平面变化分析的基础上，对华北地区下古生界进行沉积相划分和层序地层研究，将下古生界划分为两个超层序和１２个三级层序．各层序主要或基本由海侵体系域及高水位体系域组成．两个超层序最底部的层序为Ⅰ型层序，其顶底界面为Ⅰ类层序界面（ＳＢ１），其余的层序均为Ⅱ型层序，其顶底界面为Ⅱ类层序界面（ＳＢ２）边界  相似文献   

全球观测系统实地观测的内容和要求   总被引：1，自引：0，他引：1  

赵晓英  张志强 《地球科学进展》1997,12(5):455-460

全球性观测系统在检测，监测和预测地球系统的变化中发挥着越工重要的作用。地球系统的复杂性，多尺度性，非线性性，突变性，非平衡性等要求各种全球性观测系统之间必须加强联系与协调。评述了全球性观测系统联系与协调的发展趋势，并依据《全球性观测系统实地观测的内容和体系纲要》、介绍了全球性观测系统实地观测的内容和规范要求。  相似文献   

泉州市地震应急与救援工作体系的建设     

Quanzhou seismological bureau of Fujian province 《福建地震》2004,(1)

本文简要介绍泉州市地震局依靠各级政府、有关部门和全社会的共同努力 ,以落实地震应急预案为楔机促进“预、防、救”三大体系工全面发展的工作经验 :一、以落实《地震应急预案》为抓手 ,争取项目 ,以项目带动一切 ;二、结合社会转型全面加大防震减灾知识宣传力度 ;三、不以经费的来源划分你我 ,动员全社会的力量建立健全预警应急机制。  相似文献   

Mesozoic basin evolution and tectonic mechanism in Yanshan, China   总被引：5，自引：0，他引：5  

Liu Shaofeng  LI Zhong  Zhang Jinfang 《中国科学D辑(英文版)》2004,47(Z2)

The Mesozoic basins in Yanshan, China underwent several important tectonic transformations, including changes from a pre-Late Triassic marginal cratonic basin to a Late Triassic-Late Jurassic flexural basin and then to a late Late Jurassic-Early Cretaceous rift basin. In response to two violent intraplate deformation at Late Triassic and Late Jurassic, coarse fluvial depositional systems in Xingshikou and Tuchengzi Formations were deposited in front of thrust belts. Controlled by transform and extension faulting, fan deltas and lacustrine systems were deposited in Early Cretaceous basins. The composition of clastic debris in Late Triassic and Late Jurassic flexural basins respectively represents unroofing processes from Proterozoic to Archean and from early deposited, overlying pyroclastic rocks to basement rocks in provenance areas. Restored protobasins were gradually migrated toward nearly NEE to EW-trending from Early Jurassic to early Late Jurassic. The Early Cretaceous basins with a NNE-trending crossed over early-formed basins. The Early-Late Jurassic and Early Cretaceous basins were respectively controlled by different tectonic mechanisms.  相似文献   

Controls on modern alluvial fan processes in the central Alps,northern Italy     

Giovanni B. Crosta  Paolo Frattini 《地球表面变化过程与地形》2004,29(3):267-293

Alluvial fan development in Alpine areas is often affected by catastrophic sedimentary processes associated with extreme ?oods events, causing serious risks for people living on the fans. Hazard assessment in these areas depends on proper identi?cation of the dominant sedimentary processes on the fans. Data from a set of 209 alluvial fans from the central Alps of Italy are presented in this paper and analysed with the help of various statistical techniques (linear regression, principal components analysis, cluster analysis, discriminant analysis and logistic regression). First, we used modern sedimentary facies and historical records (?ood events since 15th century), to distinguish between the two dominant sedimentary processes on alluvial fans: debris ?ows and stream?ows. Then, in order to analyse the main controls on past and present fan processes, 36 morphological, geological and land‐use variables were analysed. As with observations for arid‐environment fans, catchment morphology is the most in?uential factor in the study area, whereas geology and land use are minor controls. The role of climatic change and landsliding within the catchments also seems to be very important and is discussed. Statistical techniques also help in differentiating groups of alluvial fans by sets of controlling factors, including stage and type of evolution. Finally, by using discriminant analysis and logistic regression, we classi?ed alluvial fans according to the dominant sedimentary process, with a success rate ranging between 75 and 92 per cent. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

The seismic shear of ductile cantilever wall systems in multistorey structures     

Avigdor Rutenberg 《地震工程与结构动力学》2004,33(7):881-896

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

安塞油田杏河地区长6油层沉积微相研究     

秦敬  张金亮 《西北地质》2004,37(4):15-21

在岩心描述的基础上，对杏河地区长6油层沉积相进行了分析，提出了该区主要沉积相为湖泊环境的河控三角洲体系，主要为三角洲前缘亚相沉积，主要沉积微相有水下分流河道、分流河口砂坝、前缘砂席和分流间等，分流河道和河口砂坝是本区占主导地位的骨架砂体。该区长6油层的三角洲体系是安塞三角洲体系最早发育的一支，早期分流来自于北部，后期分流转由东北方向进入，由于各期分流河道迁移、袭夺、决口以及因压实的均衡调整等，从而形成三角洲复合体内部各分流三角洲砂体的相互叠置交错。根据岩心微相分析、小层砂体形态和测井剖面对比分析，对该区长6油层砂组及小层的沉积微相进行了研究，掌握了沉积微相的时空展布和变化规律。  相似文献