Integration of zircon and apatite U–Pb geochronology and geochemical mapping of the Wude basalts(Emeishan large igneous province):A tool for a better understanding of the tectonothermal and geodynamic evolution of the Emeishan LIP     

Jia-Nan Fu  Franco Pirajno  Fan Yang  Espine Shivute  Yi-Zhan Sun  Ning Ai  Kun-Feng Qiu 《地学前缘(英文版)》2021,12(2):573-585

Radiogenic isotopic dating and Lu–Hf isotopic composition using laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS)of the Wude basalt in Yunnan province from the Emeishan large igneous province(ELIP)yielded timing of formation and post-eruption tectonothermal event.Holistic lithogeochemistry and elements mapping of basaltic rocks were further reevaluated to provide insights into crustal contamination and formation of the ELIP.A zircon U–Pb age of 251.3±2.0 Ma of the Wude basalt recorded the youngest volcanic eruption event and was consistent with the age span of 251-263 Ma for the emplacement of the ELIP.Such zircons hadε_Hf(t)values ranging from7.3 to+2.2,identical to those of magmatic zircons from the intrusive rocks of the ELIP,suggesting that crust-mantle interaction occurred during magmatic emplacement,or crust-mantle mixing existed in the deep source region prior to deep melting.The apatite U–Pb age at 53.6±3.4 Ma recorded an early Eocene magmatic superimposition of a regional tectonothermal event,corresponding to the Indian–Eurasian plate collision.Negative Nb,Ta,Ti and P anomalies of the Emeishan basalt may reflect crustal contamination.The uneven Nb/La and Th/Ta values distribution throughout the ELIP supported a mantle plume model origin.Therefore,the ELIP was formed as a result of a mantle plume which was later superimposed by a regional tectonothermal event attributed to the Indian–Eurasian plate collision during early Eocene.  相似文献   

台风“尤特”登陆后复杂路径的环境场特征   总被引：1，自引：0，他引：1  

覃武  罗小莉  钟利华  林宗桂  林开平  林墨 《气象与环境科学》2019,42(1):110-118

台风"尤特"(1311)2013年8月13—19日登陆减弱后直达桂东北并停留打转,其后又转向西南移动,"尤特"残涡在广西境内生存活动了112 h,造成了大范围强降雨。使用常规与非常规观测资料,研究了"尤特"登陆后的环境场与其长生命期及复杂移动路径的关系。结果发现:"尤特"登陆北上阶段主要受大尺度环境场的引导气流主导,后因引导气流转向减弱,与变压梯度力近似达到平衡导致停留打转;南下弱冷空气卷入与西南气流辐合形成负变压槽,负变压槽中风向气旋性切变产生正涡度效应向"尤特"残涡输送,与西南气流充沛的水汽输送共同作用使"尤特"残涡得以长时间维持。弱冷空气卷入使中尺度变压场中的正变压加强,在变压梯度力与引导气流共同作用下,"尤特"残涡沿负变压槽向西南移动。  相似文献   

Latitudinal and Scan-dependent Biases of Microwave Humidity Sounder Measurements and Their Dependences on Cloud Ice Water Path     

Anqi CAI  Xiaolei ZOU 《大气科学进展》2019,36(5):557-569

The relationship between differences in microwave humidity sounder(MHS)–channel biases which represent measured brightness temperatures and model-simulated brightness temperatures, and cloud ice water path(IWP) as well as the influence of the cloud liquid water path(LWP) on the relationship is examined. Seven years(2011–17) of NOAA-18 MHS-derived measured brightness temperatures and IWP/LWP data generated by the NOAA Comprehensive Large Array-data Stewardship System Microwave Surface and Precipitation Products System are used. The Community Radiative Transfer Model, version2.2.4, is used to simulate model-simulated brightness temperatures using European Center for Medium-Range Weather Forecasts reanalysis data as background fields. Scan-angle deviations of the MHS window channel biases range from-1.7 K to1.0 K. The relationships between channels 2, 4, and 5 biases and scan angle are symmetrical about the nadir. The latitudedependent deviations of MHS window channel biases are positive and range from 0–7 K. For MHS non-window channels,the latitudinal deviations between measured brightness temperatures and model-simulated brightness temperatures are larger when the detection height is higher. No systematic warm or cold deviations are found in the global spatial distribution of difference between measured brightness temperatures and model-simulated brightness temperatures over oceans after removing scan-angle and latitudinal deviations. The corrected biases of five different MHS channels decrease differently with respect to the increase in IWP. This decrease is stronger when LWP values are higher.  相似文献   

基于图像处理的自动野外救援系统设计     

郭乃天  庞国臣  张安彩  邱建龙 《南京气象学院学报》2019,11(4):490-494

针对野外救援的不及时性,结合人工智能等技术的应用,提出了一种新的自动野外救援系统.人类在野外和海上活动中受困后,除了依靠自身能力和装备进行求生之外,外部的有效及时救援是提高生存几率的关键.自动野外救援系统,由自动报警装置、手动报警装置实现报警,触发整个系统的运行.自动救援装置可以通过定位模块实现定位,通过执行器移动到随身装置附近实现救援,随身装置还可以发出信标导引信号;自动救援装置还可以通过传感器检测信标,通过相位检测技术等计算待救者的坐标并规划路径,实现更精准的定位与救援.  相似文献   

气象因子对半冬性小麦灌浆速度的影响效应研究     

信志红  郭建平  谭凯炎  张利华  孙义  杨荣光 《气象》2019,45(12):1736-1746

选用黄淮海冬麦区4个半冬性小麦品种郯麦98、山农18、徐麦33、皖麦52为试验材料,通过分期播种试验,利用方差分析、相关分析、逐步回归和通径分析等方法,分析半冬性小麦籽粒灌浆速度变化趋势和气象因子对灌浆速度的影响。结果表明,正常播期冬小麦灌浆速度波动性最小、千粒重最大,迟播10 d冬小麦灌浆速度波动性最大、千粒重最小;华北区品种郯麦98灌浆速度表现最稳定、千粒重最高,而黄淮区品种皖麦52灌浆速度最大;半冬性小麦灌浆持续期为35～39 d;南北气候差异是影响各品种冬小麦灌浆速度不同的原因之一。半冬性小麦各播期灌浆速度的变化趋势一致,灌浆速度变化与相关显著气象因子的变化规律相符合;灌浆速度峰值期一般出现在开花后15～25 d,迟播冬小麦最大灌浆速度出现时间较对照处理提前,不利于提高粒重;气温条件对冬小麦灌浆速度影响显著,其中最高气温要素是影响不同播期品种灌浆速度的共有关键因子。通径分析表明,最高气温对灌浆速度的作用由自身的直接效应决定,而日照时数与最低气温对灌浆速度的作用与间接效应一致;最高气温平均值对灌浆速度的影响最重要,日照时数和最低气温平均值对灌浆速度的影响较弱;最高和最低气温平均值、日照时数均为灌浆速度的限制因子,其中最高气温平均值对灌浆速度变化的决策作用最大。  相似文献   

Stress‐dependent hardening and failure surfaces of dry sand     

W. Ehlers  O. Avci 《国际地质力学数值与分析法杂志》2013,37(8):787-809

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Trace‐element signatures of apatites in granitoids from the Mt Isa Inlier,northwestern Queensland     

E. A. Belousova  S. Walters  W. L. Griffin  S. Y. O'Reilly 《Australian Journal of Earth Sciences》2013,60(4):603-619

The concentrations of trace elements in apatite from granitoid rocks of the Mt Isa Inlier have been investigated using the laser‐ablation inductively coupled plasma‐mass spectrometry (ICP‐MS) microprobe. The results indicate that the distribution of trace elements (especially rare‐earth elements (REE), Sr, Y, Mn and Th) in apatite strongly reflects the chemical characteristics of the parental rock. The variations in the trace‐element concentrations of apatite are correlated with parameters such as the SiO₂ content, oxidation state of iron, total alkalis and the aluminium saturation index (ASI). The relative enrichment of Y, HREE and Mn and the relative depletion of Sr in the apatites studied reflect the degree of fractionation of the host granite. Apatites from strongly oxidised plutons tend to have higher concentrations of LREE relative to MREE. Manganese concentrations are higher in apatite from reduced granitoids because Mn²⁺substitutes directly for Ca²⁺. The La/Ce ratio of apatite is well‐correlated with the whole‐rock K²O and Na²O contents, as well as with the oxidation state and ASI. Because apatite trace‐element composition reflects the chemistry of the whole rock, it can be a useful indicator mineral for the recognition of mineralised granite suites, where particular mineralisation styles are associated with granitoids that have specific geochemical fingerprints.  相似文献   

Tectonic interpretation of metamorphic tectonites: integrating compositional mapping,microstructural analysis and in situ monazite dating     

M. L. WILLIAMS  M. J. JERCINOVIC 《Journal of Metamorphic Geology》2012,30(7):739-752

Interpreting tectonic histories from metamorphic tectonites requires an understanding of the linkages and feedbacks between deformation and metamorphism. Relationships between deformation and metamorphism can be divided into two broad groups: active and passive. Active relationships involve direct interactions whereby deformation directly influences metamorphic reactions or metamorphism directly affects the rate or style of deformation. One of the most important ‘active’ relationships is the role that deformation plays in helping to remove unstable reactant phases and to promote the growth of stable product phases. Passive relationships are correlations or linkages that allow the deformation history to be integrated with the metamorphic history. Compositional mapping of major and accessory phases and especially maps of larger thin section domains are particularly valuable for evaluating strain partitioning, scales of equilibrium, relationships between metamorphic textures and deformational fabrics, and in particular, for interpreting geochronological data. Petrological pseudosections are an increasingly utilized tool for interpreting microtextures and for linking deformation, metamorphism, and large‐scale tectonics. In situ geochronology and petrological analysis of chronometer phases (i.e. monazite, xenotime, titanite, allanite, etc.) are a critical part of tectonic analysis of metamorphic rocks. The electron microprobe plays an essential role in characterizing chronometer phases and placing them into the context of silicate fabrics and textures.  相似文献   

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China     

W. Chen  X. B. Lü  Q. Yuan  X. D. Wang 《Australian Journal of Earth Sciences》2013,60(7):1041-1062

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.  相似文献   

磁法勘探在新疆尉犁县且干布拉克蛭石、磷灰石矿床普查评价中的应用效果     

周厚嘉  张万祥 《新疆地质》1989,(2)

尉犁县且干布拉克蛭石矿为特大型,磷灰石矿为大型.蛭石、磷灰石均赋存于磁性较强的透辉石岩及超基性岩中,矿体与围岩间有较明显的磁性差异,含矿母岩70%被第四系覆盖.利用地面磁测,较好地圈定了含矿母岩的边界,提供了含矿体的平面形态及产状,为勘查缩小了靶区.磁法勘探不仅是直接找磁铁矿床及某些有关金属矿床的有效方法,而且在间接寻找非金属矿床上亦能发挥作用.  相似文献