Seafloor spreading, obduction and triple junction tectonics of the Mineoka Ophiolite, Central Japan     

Yujiro Ogawa  Akiko Takahashi 《Tectonophysics》2004,392(1-4):131

The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim.  相似文献   

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China          下载免费PDF全文

S.‐J. Wang  L. Wang  M. Brown  P. M. Piccoli  T. E. Johnson  P. Feng  H. Deng  K. Kitajima  Y. Huang 《Journal of Metamorphic Geology》2017,35(6):601-629

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.  相似文献   

Paratacamite from Gypsum Veins in Sandstones of the Kuqa Basin,Xinjiang, China: Implications for a New Epigenetic Cu Enrichment Mechanism          下载免费PDF全文

Yangtong Cao  Chenglin Liu  Pengcheng Jiao  Chunlian Wang 《Resource Geology》2016,66(2):114-126

The Kuqa Basin filled with Paleogene evaporite series is located in the northeast of the Tarim Basin, Xinjiang, China. It is famous for sandstone‐hosted Cu deposits formed by synsedimentary processes. However, our recent studies reveal that there has been another Cu mineralization mechanism in this basin. Field investigations show that there is a close relationship among faults, salt domes, and brine. Cu deposits are mainly located in two east–west‐trending anticlinal belts in the basin, adjacent to salt domes in the belts. Cu minerals in gypsum veins of the Jidike and Kangcun formations have been investigated by SEM, EDS, and X‐ray diffraction methods. The occurrence of paratacamite in gypsum veins has been reported to coexist with glauberite and halite in the joint planes of sandstones. In addition, it occurs accompanying residual crystal salt encrustation in limestone fractures, or in sandstones in dendritic form. These features indicate that the surface‐Cu enrichment in the Kuqa Basin might have originated from Cu‐bearing brine in the underlying evaporite units, which migrated upward along fractures. In addition, the presence of H₂S in the east–west fault belt in the Kuqa Basin, and the discovery of surface sulfur, calcium carbonate, and covellite, suggest thermochemical sulfate reduction near salt domes in the deeper parts of the rock units. This process resulted in the generation of reduced brine and provided a favorable environment for Cu enrichment. Therefore, the surface‐Cu mineralization near salt domes is interpreted to be the result of Cu‐bearing brine migrating upward to the surface along faults (or joints) following the intrusion of deep salt domes. The geological evidence indicates the presence of reducing brine and Cu‐bearing brine near the salt dome in the deeper rocks of the Kuqa Basin, thus making the intrusive contact zone of the salt dome a favorable site for the epigenetic enrichment of Cu. Our study demonstrates that Cu enrichment in the Kuqa Basin resulted not only from synsedimentary deposition but also through epigenetic enrichment associated with salt dome intrusion and brine‐rich fluids.  相似文献   

Petrogenesis of plio-quaternary intra-plate continental alkaline lavas from the İskenderun Gulf (Southern Turkey): Evidence for metasomatized lithospheric mantle     

Aykut Güçtekin 《Chemie der Erde / Geochemistry》2018,78(4):521-534

The Quaternary alkaline volcanic field of Southern Turkey is characterized by intra-continental plate-type magmatic products, exposed to the north of the ?skenderun Gulf along a NE-SW trending East Anatolian Fault, to the west of its intersection with the N–S trending Dead Sea Fault zone. The ?skenderun Gulf alkaline rocks are mostly silica-undersaturated with normative nepheline and olivine and are mostly classified as basanites and alkaline basalts with their low-silica contents ranging between 43 and 48?wt.% SiO₂. They display Ocean Island Basalt (OIB)–type trace element patterns characterized by enrichments in large-ion-lithophile elements (LILE) and light rare earth element (LREE), and have (La/Yb)_N?=?8.8–17.7 and (Hf/Sm)_N?=?0.9–1.6 similar to those of basaltic rocks found in intraplate suites. The basanitic rocks have limited variations Sr-Nd isotopic ratios (⁸⁷Sr/⁸⁶Sr?=?0.70307–0.70324, ¹⁴³Nd/¹⁴⁴Nd?=?0.512918–0.521947), whereas the alkali basalts display more evolved Sr-Nd isotopic ratios (⁸⁷Sr/⁸⁶Sr?=?0.70346-0.70365, ¹⁴³Nd/¹⁴⁴Nd?=?0.512887–0.521896). The ?skenderun Gulf alkaline rocks also display limited Pb isotopic variations with ²⁰⁶Pb/²⁰⁴Pb?=?18.75–19.09 ²⁰⁷Pb/²⁰⁴Pb?=?15.61–15.66 and²⁰⁸Pb/²⁰⁴Pb?=?38.65–39.02, indicating that they originated from an enriched lithospheric mantle source. Calculated fractionation vectors indicate that clinopyroxene and olivine are the main fractionating mineral phases. Similarly, based on Sr-Nd isotopic ratios, the assimilation and fractional crystallization (AFC) modeling shows that the alkali basalts were affected by AFC processes (r?=?0.2) and were slightly contaminated by the upper crustal material.The high TiO₂ contents, enrichments in Ba and Nb, and depletions in Rb can likely be explained by the existence of amphibole in the mantle source, which might, in turn, indicate that the source mantle has been affected by metasomatic processes. The modeling based on relative abundances of trace elements suggests involvement of amphibole-bearing peridotite as the source material. ?skenderun Gulf alkaline rocks can thus be interpreted as the products of variable extent of mixing between melts from both amphibole-bearing peridotite and dry peridotite.  相似文献   

南海IODP 349航次基底玄武岩中碳酸盐岩脉的岩石学特征*     

许佳锐  陈毅凤  王宝云 《热带海洋学报》2018,37(6):63-73

国际大洋发现计划(International Ocean Discovery Program, IODP)349航次在南海东部次海盆和西南次海盆残留扩张脊附近的U1431和U1433站位首次钻取基底玄武岩, 通过对16块基底玄武岩内的碳酸盐岩脉薄片镜下观察以及激光拉曼光谱分析, 揭示碳酸盐矿物为方解石和文石, 为典型的洋壳低温热液蚀变次生矿物。U1431站位碳酸盐岩脉为独立的方解石脉、文石脉交替出现; 而U1433站位则存在方解石脉、文石脉和方解石-文石共生脉三种情况。此外, U1431站位在基底~42.1m处出现了平行的方解石脉和文石脉, 揭示U1431存在不同来源热液的多期活动, 即可能存在多次或多阶段不同的热液注入。U1431和U1433站位的碳酸岩脉中, 文石的矿物集合体形状基本一致, 呈块状、纤维状和放射纤维状; 而方解石存在差异, U1431的方解石以斑块状、块状、粒状和纤维状出现, 而U1433的方解石仅出现块状。U1431站位的碳酸盐岩脉的丰度明显高于U1433站位。这些均揭示U1431站位的低温热液活动强, 而U1433站位则相对弱。两个站位的热液活动不同很可能是由于区域地质环境的差异造成——U1431附近的巨大海山为其提供了热液补给, 而U1433远离热液的补给/渗漏点。  相似文献   

塔中地区志留系沥青砂岩成岩作用及其对储层性质的影响   总被引：5，自引：0，他引：5  

张金亮  杜桂林 《矿物岩石》2006,26(3):85-93

运用沉积学原理对塔中地区志留系经历复杂成岩演化的沥青砂岩进行研究分析,了解到该岩石主要经过压实作用、胶结作用和溶蚀作用等成岩作用。其胶结物的主要类型有绿泥石、伊利石、高岭石、伊-蒙混层等粘土矿物以及碳酸盐矿物、石英、长石、黄铁矿等。孔隙类型以粒间孔隙、粒内孔、铸模孔、特大孔、裂缝孔隙等为主,其中以粒间孔隙最为发育,低地温梯度有利于在深层形成次生孔隙。志留系沥青砂岩储层物性受沉积和成岩双重因素的影响,成岩演化阶段处于晚成岩A期。根据影响储层物性的储层成岩作用,可将成岩相类型划分为不稳定碎屑溶蚀成岩相、压实-弱溶蚀成岩相、压实充填成岩相、压实压溶成岩相、碳酸盐胶结成岩相等几种主要类型,成岩相类型决定了储层性质,不稳定碎屑溶蚀成岩相和压实-弱溶蚀成岩相是本区较好的油气储层。  相似文献   

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials     

Qingli Dai 《国际地质力学数值与分析法杂志》2010,34(13):1321-1345

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Middle to early Late Ordovician hydrothermal veining in the Molong Volcanic Belt,northeastern Lachlan Fold Belt: Sedimentological evidence     

G. H. Packham  J. B. Keene  L. M. Barron 《Australian Journal of Earth Sciences》2013,60(2):257-269

Detrital volcanic and vein quartz, accompanied by felsic volcanic debris, occur as minor constituents in the Ordovician subduction‐related mafic volcanics of the Molong Volcanic Belt. In the western province of the Molong Volcanic Belt, detrital quartz is present in the three episodes of the mafic Volcanics. Volcanic quartz occurs in allochthonous limestone blocks in the Bendigonian Hensleigh Siltstone overlying the Mitchell Formation. The second volcanic episode (the Fairbridge Volcanics) commenced after a hiatus of approximately 20 million years and lasted around 10 million years from Darriwilian to Gisbornian time. Locally derived vein quartz, volcanic quartz and felsic detritus are concentrated at the bases of autochthonous Wahringa and Yuranigh Limestone Members of the volcanics and are extensive and abundant in basal beds of the regional Eastonian limestone body that transgressed over an eroded volcanic centre at Cargo. This early Eastonian debris, deposited early in an 8 million‐year volcanic hiatus preceding the final Ordovician Bolindian volcanism, establishes a pre‐Eastonian age for mineralisation at Cargo. It is inferred that the pauses in volcanism were preceded by magmatic fractionation, intrusion and hydrothermal activity and followed by erosion, subsidence and deposition of autochthonous limestones. Minor occurrences of vein and volcanic quartz are found in Bolindian volcanogenic sediments of the third volcanic phase. It is concluded that hydrothermal vein formation (and mineralisation by inference) was associated with pauses in volcanic activity throughout the Middle to early Late Ordovician over a wide area in the western province, culminating in the mineralisation at Cargo and Copper Hill near Molong. Volcanism in the eastern province of the Molong Volcanic Belt was continuous from at least Darriwilian to latest Ordovician time. Here, detrital hydrothermal vein quartz and volcanic quartz and felsic detritus are distributed through late Middle and early Late Ordovician turbidites of the Weemalla Formation. The possible existence of cycles in the source area like those of the Fairbridge Volcanics is masked by the distal nature of these deposits. Vein formation occurred in both provinces from late Middle Ordovician to early Late Ordovician, long before the formation of the world‐class mineral deposit at Cadia associated with the latest Ordovician Cadia Monzonite.  相似文献   

Seismic Sequence in Carbonate Rocks By Vibrational Liquefaction1     

Qiao Xiufu  Song Tianrui  Gao Linzhi  Peng Yang  Li Haibing  Gao Mai  Song Biao  Zhang Qiaoda 《《地质学报》英文版》1994,7(3):243-265

Abstract On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as escaped structure of micrite veins and liquefied deformation formed in the period of seismic liquefaction, land subsidence structure after liquefaction, tsunamic hummocky and turbidite produced by seismic events, This sequence is a generalization and summation of field observation in vast areas, which shows the whole process of a strong seismic event and provides an unified theoretical explanation. The pattern of the seismic sequence by vibrational liquefaction provides one of correlation standards for geologists in the field to discriminate events in carbonate sequences. Based on the pattern of seismic sequence, the authors first advance a new conception of the Palaeo - Tanlu (Tancheng - Lujiang) Zone and discuss primarily its geological significations.  相似文献   

Gold-bearing rocks of Mangalur greenstone belt,Gulbarga District,Karnataka     

S. G. Tenginkai  A. G. Ugarkar 《Journal of Earth System Science》1987,96(2):103-117

The Mangalur greenstone belt of Dharwar Craton, South India, is an Archaean schist belt dominated by metavolcanic rocks. The gold mineralization occurs within the metavolcanics and the fabric, mineralogy and geochemistry of these host rocks indicate that they were tholeiitic basalts regionally metamorphosed under medium to low-grade greenschist facies. The basic metavolcanic rocks occur as tholeiitic metabasalts and amphibolites. The rocks have undergone some fractionation and appear to be derived from melts generated by 10 to 25% melting of the mantle at depths 30 to 35 km around temperature 1200°C and pressure 12 kb. The source of gold is mainly in the basalts and not in the surrounding granites.  相似文献