土工布充砂袋的应用及其研究进展   总被引：10，自引：1，他引：10  

张文斌  谭家华 《海洋工程》2004,22(2):98-104

对土工布充砂袋技术和国内外的应用进行了介绍。鉴于土工布充砂袋属于一种新兴起的土工新材料和新技术，在设计和工程实际中还存在着许多急待解决的问题，着重对各种典型状态和典型环境下的土工布充砂袋的变形、应力和土工布充砂袋堆的稳定性研究进展进行综述，最后提出进一步研究的思路。  相似文献   

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns   总被引：6，自引：0，他引：6  

N.L. Watts   《Marine and Petroleum Geology》1987,4(4)

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.  相似文献   

东亚岛弧地形横剖面与板块运动   总被引：2，自引：2，他引：2  

史学建 《海洋地质与第四纪地质》1997,17(4):91-99

通过对东亚岛弧横剖面形态的系统分析，并结合弧前的构造应力的分析，作者认为，东亚岛弧形成于板块东移的构造环境中，横剖面形态存在两种基本类型即内缓外陡型和内陡外缓型，这两种不同的横剖面具有不同的弧前应力，前者表现弧前挤压，后者表现弧前引张，这反映地貌形态与构造应力之间的密切关系。  相似文献   

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints     

Chen Tieyun Zhang Huiyuan Professor  Shanghai Jiao Tong University  Shanghai Doctor of Engineering  Shenzhen Shipbuilding Trading Co. LTD. 《中国海洋工程》1993,(1)

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.  相似文献   

牙鲆鱼苗长途运输技术的试验研究   总被引：3，自引：0，他引：3  

林琼武  黄标武  吴佳伟 《台湾海峡》2003,22(1):59-64

本实验对10个批次，总数为19047尾的不同规格和产地的牙鲆鱼苗长途运输效果进行了研究。结果表明，规格为9-12cm的鱼苗，在水温6－12℃，运输时间为35－50h，采用空运和低温活水车运输，运输死亡率为664尾，死亡率为3.39%，低温活水车短途运输是可行的，尽管长途车运方式成本较低，但由于应激强度较大，对鱼苗的生长性能影响较为严重，驯养10d累计死亡率最高达18.1%，这种模式不可取。低温（6℃）、小规格（9cm)的空运较适合牙鲆鱼苗长途运输。此外，本文还就运输应激反应、预防措施和药物防治进行详细的讨论。  相似文献   

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed     

S.C.Chang  L.K.Chien  J .G.Lin  Y.F.Chiu 《中国海洋工程》2006,20(1)

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…  相似文献   

Reducing the short-term mortality of juvenile school prawns (Metapenaeus macleayi) discarded during trawling     

Macbeth  William G.; Broadhurst  Matt K.; Paterson  Brian D.; Wooden  Michael E.L. 《ICES Journal of Marine Science》2006,63(5):831-839

  相似文献   

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers   总被引：4，自引：1，他引：4  

周宏杰  闫澍旺崔溦 《中国海洋工程》2005,19(1):155-166

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.  相似文献   

旧路改建高速公路中地基强夯效应测试与工艺参数分析   总被引：2，自引：1，他引：1  

吕国仁  崔新壮 《岩土力学》2008,29(9):2542-2546

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。  相似文献   

断层垂向封闭性定量研究方法及其在准噶尔盆地白家海凸起东道海子断裂带应用   总被引：2，自引：0，他引：2  

梁全胜  刘震  何小胡  王德杰  王晓东 《现代地质》2008,22(5)

断层的垂向封闭能力主要取决于断面的紧闭程度和断裂带内填充物的岩性。在定量计算断面正压力和断层两侧地层泥地比的基础上,提出了断层垂向封闭因子(Fvs)的概念,并将其定义为断面正压力与断层两侧地层泥地比的乘积。通过该参数可以定量评价断层的垂向封闭能力。以准噶尔盆地东道海子断裂为例,在建立断层垂向封油、气能力评价标准的基础上,应用断层垂向封闭因子(Fvs)定量评价了该断裂带的成藏期垂向封闭性及现今垂向封闭性,分析了该断裂带对油气成藏的控制作用,得到较好效果。  相似文献