共查询到20条相似文献，搜索用时 62 毫秒
1.
应用有限元方法，对双层立管进行了应力的计算分析。通过一个工程实例，阐述了模型建立．重要参数计算及结果分析的全过程，并着重分析了法兰位置，海底平管段的膨胀量及土壤的约束作用这三者对立管内部应力的显著影响，可为立管设计者借鉴。 相似文献
2.
Offshore pipelines operating under high pressure and temperature are subjected to upheaval buckling. Pipeline behaviour in upheaval buckling depends on a number of factors including the shape of pipeline imperfection, installation stresses, loading types, seabed sediment behaviour and the flexural stiffness of the pipe. Current method of predicting upheaval buckling is based on simplified shapes of pipeline imperfection developed for idealized seabed conditions. To account for the effect of internal pressure, the pressure load is represented using an equivalent temperature. However, the applicability of these idealizations on the prediction of upheaval buckling has not been well-investigated. In this paper, the three-dimensional finite element modelling technique is used to investigate the applicability of idealized shapes and their effects on the upheaval buckling of pipeline for a seabed condition at offshore Newfoundland in Canada. The finite element model is then used to conduct a parametric study to investigate the effects of installation stress, loading types, seabed parameters and the flexural stiffness of the pipe. Finally, a design chart is developed to determine the optimum height of seabed features to manage pipeline stability against upheaval buckling under different temperature and pressure loadings. 相似文献
3.
采用弹性基础梁模型,模拟钢悬链线立管(steel catenary riser,SCR)与海床土的相互作用,推导了弹性基础梁模型的有限元公式,基于该模型编制了钢悬链式立管的动力分析程序,在此基础上,分析了在浮体运动及环境载荷作用下,钢悬链线立管触地点区域的动力响应特征,并与弹簧支撑模型进行了比较。研究表明,弹性基础梁模型对单元长度的敏感性较低,可采用较长的单元,从而减少计算量。 相似文献
4.
Offshore oil and gas exploration are gradually heading toward the deep sea and even the ultra-deep sea. According, the working temperature and pressure intensity of subsea oil and gas pipelines have increased by a considerable degree. This situation is accompanied by the global buckling problem in deep sea pipelines, which has become increasingly common. Meanwhile, ordinary single-layer pipelines cannot last for a long time under harsh deep-sea working conditions. Thus, multilayer pipelines, such as the pipe-in-pipe (PIP) structure and bundled pipelines, have gradually become top choices. However, the global buckling mechanisms of these multilayer pipelines are more complicated than those of single-layer pipelines. The sleeper–snake lay pipeline, which is an active control method for global buckling, was used in this study. The change and development laws of global buckling in a PIP structure at different wavelengths and amplitudes were determined through an experimental study. A dynamic solution method that considers artificial damping was adopted to establish finite element global buckling models of a PIP structure with initial imperfections. The effects of various factors, such as pipeline laying shape, sleeper–pipe function, and seabed–pipe function, on global buckling were analyzed. By the result of finite element method analysis, the initial imperfection, and sleeper–pipeline friction were determined to be the key factors that influenced critical pipeline buckling force. Accordingly, a reference for the design of PIP structures is presented. 相似文献
5.
以惠州25-3/1双层海底管道为例,提出高温荷载下刚性连接双层海底管道的侧向屈曲分析方法,并研究该类管道的侧向屈曲特性.将解析分析与有限元技术相结合,在提出刚性连接双层海底管道屈曲分析方法的同时,发展了Hobbs公式的应用范围,使其成为屈曲分析有限元建模指导工具.以分析不稳定平衡问题的改进Riks方法被证明为高温海底管道屈曲分析的有效算法,得到的弧长-载荷比例因子曲线能够充分地描述双层管道的屈曲失稳过程.惠州管道的分析结果表明,刚性连接双层海底管道的整体热稳定性较高,在海床上一般不容易发生侧向屈曲,但热荷载作用下内管的后屈曲将有可能引发较高的应力集中,对此需要充分校核;另外环空间隙的减小有利于提高内管的临界屈曲载荷,从而提升管道的整体性能. 相似文献
6.
7.
基于广义Biot动力理论和Longuet-Higgins线性叠加模型,构建波浪-海床-管线动态响应的有限元计算模型,求解随机波作用下,多层砂质海床中管线周围土体孔隙水压力和竖向有效应力的分布。采用基于超静孔隙水压力的液化判断准则,得出液化区的最大深度及横向范围,从而判断海床土体液化情况。考虑海洋波浪的随机性,将海床视为多孔介质,海床动态响应计算模型采用u-p模式,孔隙水压力和位移视为场变量。并考虑孔隙水的可压缩性、海床弹性变形、土体速度、土体加速度以及流体速度的影响,忽略孔隙流体惯性作用。参数研究表明:土体渗透系数、饱和度以及有效波高等参数对海床土体孔隙水压力、竖向有效应力和液化区域分布有显著影响。 相似文献
8.
埕岛油田海底管线在位稳定性的计算分析 总被引：1，自引：0，他引：1
埕岛油田主要分布粉土和淤泥质软土2类典型的海床.通过建立海床与其上裸置管线相互作用的有限元计算模型,对埕岛油田2类典型海床上裸置管线的在位稳定性进行了数值计算分析,并与现行常用的DNV(挪威船级社)管道设计方法的计算结果进行了对比.分析表明,对于埕岛油田粉土海床上裸置管线的在位稳定性分析,数值计算结果与DNV简化分析方法的结果较为一致;对于埕岛油田淤泥质软土海床上裸置管线的在位稳定性分析,DNV简化分析得到的裸置管线的在位稳定性一般高于相应的数值计算结果. 相似文献
9.
10.
With the increase in demand and supply gap in the oil and gas industry, new developments of oil and gasinfrastructure are moving into deeper water. This requires design and construction of long high temperature and high pressure pipelines from deep sea to shore. These pipelines are subjected to cyclic expansion during operating cycles. Accumulated axial movement due to repeated thermal cycles may lead to global displacement referred to as ‘walking’. Walking rates depend on the restraint associated with seabed friction. In conventional analyses, seabed friction is independent of the rate of thermal loading and expansion but it has been recognised that the sliding resistance between a pipe and the seabed varies with velocity, partly due to drainage effects. In this paper a numerical model is used to explore the effect of velocity-dependent seabed friction. A velocity-dependent friction model is implemented in commercial software ABAQUS and validated via single element and simple (flat seabed) pipeline cases. This model features upper and lower friction limits, with a transition that occurs as an exponential function of velocity. A parametric study is performed using differing rates of heating and cool-down in walking situations driven by seabed slope, SCR end tension and the difference between heat up and cool down rates. The walking behaviour is compared to cases with constant friction and solutions are proposed to express the velocity-dependent response in terms of an equivalent constant friction. These equivalent friction values can then be applied in existing simple solutions or more complex numerical analyses, as a short cut method to account for velocity-dependent friction. 相似文献
11.
AbstractBlast response of submerged pipelines has been a research focus in recent years. In this article, a three-dimensional numerical model is established to investigate dynamic response of pipelines due to underwater explosion. The u–p approximation is integrated into finite element method (FEM) to simulate pore water effect in the seabed. Numerical continuity between hydraulic pressure in the flow field and pore pressure in the marine sediment is guaranteed to realize the blast response of submerged pipelines in ocean environment. Both fluid–structure interaction (FSI) and pipeline–seabed interaction (PSI) have been considered in the proposed model simultaneously. A comprehensive parametric study is carried out after validation of the present model with test data from underground explosion and underwater explosion, respectively. The effect of embedment depth, TNT equivalent, stand-off distance, pipeline diameter, and pipeline thickness to blast response of the submerged pipelines is investigated based on numerical results. Variation of deformation patterns and stress distribution of the pipeline with various installation and structure parameters has been illustrated and discussed to facilitate engineering practice. 相似文献
12.
Owing to nonlinear contact problems with slip and friction, a lot of limiting assumptions are made when developing analytical models to simulate the behavior of an unbonded flexible riser. Meanwhile, in order to avoid convergence problems and excessive calculating time associated with running the detailed finite element （FE） model of an unbonded flexible riser, interlocked carcass and zeta layers with complicated cross section shapes are replaced by simple geometrical shapes （e.g. hollow cylindrical shell） with equivalent orthotropic materials. But the simplified model does not imply the stresses equivalence of these two layers. To solve these problems, based on ABAQUS/Explicit, a numerical method that is suitable for the detailed FE model is proposed. In consideration of interaction among all component layers, the axial stiffness of an eight-layer unbonded flexible riser subjected to axial tension is predicted. Compared with analytical and experimental results, it is shown that the proposed numerical method not only has high accuracy but also can substantially reduce the calculating time. In addition, the impact of the lay angle of helical tendons on axial stiffness is discussed. 相似文献
13.
The stability of submarine pipelines has been extensively studied by coastal engineers in recent years. Seismic-induced pore pressure and effective stresses in the saturated porous seabed and pipeline are the main important factors in the analysis of foundation stability around submarine pipelines. The majority research of the seismic-induced dynamic response around an offshore pipeline has been limited to two-dimension cases. In this paper, a three-dimensional finite element model including buried pipeline is established by extending DYNE3WAC. Based on the proposed numerical model, a parametric study is conducted to examine the effects of soil characteristics and pipeline configurations on the seismic-induced soil response around offshore pipelines. 相似文献
14.
With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed. 相似文献
15.
浮体运动和海床土刚度是引起钢悬链式立管(steel catenary riser,简称SCR)管土相互作用的关键因素,将导致SCR触地区的疲劳损伤。以工作水深为1500 m的浮式平台上生产立管SCR为研究对象,基于法向抗力模型和侧向阻力模型建立管土作用模型,在环境载荷和浮体运动作用下,开展SCR与浮式平台的整体分析,研究海床土参数对SCR触地区动态响应和疲劳寿命的敏感性。通过改变海床土的不排水抗剪强度Su0、强度梯度ρ、吸力因子fsuc、吸力衰减参数λsuc以及再贯入系数λrep等,得到不同参数对触地区动力响应、疲劳寿命的影响规律。研究结果表明:①基于软黏土海床,随着不排水抗剪强度Su0的增加,触地区立管疲劳寿命减幅达到33.23%,敏感性最高;②吸力因子fsuc越大,立管疲劳寿命越小且减幅达23.77%,其敏感性较高;③随着再贯入系数λrep增大,触地区立管疲劳寿命增幅达到15.48%;④海床抗剪强度梯度ρ和吸力衰减参数λsuc对立管疲劳寿命影响较小。研究结论能为SCR设计分析及安全服役提供重要参考。 相似文献
16.
海底管道是天然气水合物大规模开采和集输的关键装备。天然气水合物的开采过程会扰动沉积层的结构，改变沉积层的强度和力学特性，诱发海床发生不均匀沉降，并对水合物开采区内海底管道的力学特性产生影响，如引起管道发生大变形、悬跨、屈曲、断裂等。基于ABAQUS有限元软件，建立天然气水合物开采区内“海床-管道”耦合作用模型，模拟了天然气水合物开采过程中海床沉降变形及其对管道应力、应变、弯矩、悬跨等力学行为的影响。研究结果表明，在天然气水合物开采过程中，海床的不均匀沉降将引起管道发生显著位移并发生弯曲，管道的应力、应变随着变形的增大而增大。当海床沉降量达到某一程度时，管道将脱离海床，产生悬跨，并引发涡激振动风险。 相似文献
17.
Accurate assessment of pipe-soil interaction under cyclic wave actions is of pronounced importance for the stability analysis of submarine pipelines in sandy seabed. This paper presents a plane-strain numerical study on such a problem using a finite element program DBLEAVES, which incorporates an elasto-plastic soil model that is capable of capturing the cyclic mobility behavior of sandy soils under cyclic loadings. A detailed validation against analytical solution and model test results was provided to demonstrate the robustness of the present numerical model to mimic both pre- and post-liquefaction behavior of sands, before an extensive parametric study was introduced. It was found that the accumulation of excess pore pressure in the vicinity and far field of a pipeline was strongly affected by the existence of it, with an influential range of about two pipe diameters. The influences of wave and seabed properties (e.g. relative densities) on the uplift response of pipelines were then investigated, based on which an explicit model was developed to quantify the degradation effect of waves on the uplift bearing capacity of pipelines against thermally-induced buckling. 相似文献
18.
19.
波浪作用下孔隙海床-管线动力相互作用分析 总被引：1，自引：0，他引：1
波浪作用下海床中的孔隙水压力与有效应力是影响海底管线稳定性的主要因素。然而,在目前的海床响应分析中一般将管线假定为刚性,并不能合理地考虑海床与管线之间的相互作用效应,同时也没有考虑土体和管线加速度对海床动力响应的惯性影响,从而无法确定由此所引起的管线内应力。为此考虑管线的柔性,分别采用饱和孔隙介质的Biot动力固结理论和弹性动力学理论列出了海床与管线的控制方程,进而采用摩擦接触理论考虑海床与管线之间的相互作用效应,基于有限元方法建立了海床-管线相互作用的计算模型及其数值算法。通过变动参数对比计算讨论了管线几何尺寸、海床土性参数对波浪所引起的管线周围海床孔隙水压力和管线内应力的影响。 相似文献
20.
José R.M. de Sousa Carlos Magluta Ney Roitman Gilberto B. Ellwanger Edison C.P. Lima Arnaldo Papaleo 《Applied Ocean Research》2009,31(3):157-170
Even though hydraulic collars are largely used to install flexible risers, neither the loads imposed by this equipment nor the response of the risers to these loads have been previously studied. Hence, this paper presents a three-dimensional nonlinear finite element (FE) model to predict the response of flexible risers to loads imposed by hydraulic collars and also provides a set of equations to predict these loads. The FE model relies on an analogy between helical tendons and orthotropic shells to simulate the inner carcass and the pressure armour of flexible risers. Shell elements are used to represent the polymeric layers and three-dimensional beam elements simulate the wires of the tensile armours. Material, geometric and contact nonlinearities are addressed. Contact interactions between the layers of the riser are handled by surface to surface contact elements with a contact detection algorithm based on the pinball technique and contact forces evaluated with the augmented Lagrangian method. A 9.5″ flexible riser is analyzed and the numerical results are compared to those from the experimental tests. The agreement between all results indicates that the proposed FE model is an efficient approach to predict the response of flexible risers to loads imposed by hydraulic collars and, moreover, may be used to analyze the response of such structures to other types of loads. 相似文献