A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization     

Evangelos I. Stavridakis 《Geotechnical and Geological Engineering》2006,24(2):379-398

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.  相似文献   

柏井采空区地基注浆加固技术     

张志沛 《水文地质工程地质》1997,24(1):56-58

通过目前国内外现有资料的对比研究，对严重影响石太高速公路修建和运营的柏井采空区采用压力注浆的方法，充填采空区上覆的裂隙冒落带，以达到加固地基的目的。灌注材料选用水泥和粘土，水固比为１：１．５，依据地面构造物不同，在桥涵地段采用１：０．８：０．７（水：水泥：粘土，下同）的配比，在边坡地段采用１：０．５：１的与比，在一般路段采用１：０．３：１的配比，灌注浆液的结石体在采空区及上覆的裂隙冒落带中充填率达  相似文献   

水泥搅拌桩与锚杆组合支护结构的力学参数研究   总被引：1，自引：0，他引：1  

赵剑豪  陈振建  方家强 《岩土力学》2004,25(Z2):265-270

水泥搅拌桩--锚杆组合支护结构是一种新型的组合支护结构,笔者采用有限元方法进行各相关力学参数研究,分析了该组合支护结构的受力特性及变形性态.通过计算结果与实测数据的比较,表明本文所得结论对该组合支护结构的应用有一定的指导价值.  相似文献   

Mineralogical changes during thermal demagnetization of natural continental sandstones     

C. Prezzi  R. Somoza  R. C. Mercader 《Studia Geophysica et Geodaetica》2005,49(2):213-232

We study the mineralogical changes suffered by specimens of natural miocene red and green continental sandstones (from Pozuelos Formation and Tiomayo Formation) cropping out in the Argentine Puna that increase their bulk magnetic susceptibility and change color when thermally treated. We hypothesize that on heating siderite, which is present in small quantities as cement in the studied sandstones, would oxidize and decompose into maghemite and/or magnetite. Subsequent heating to higher temperatures sometimes would bring about the conversion of maghemite and/or magnetite to hematite. Mössbauer spectroscopy proved to be a very valuable tool for the determination of the presence of siderite in small amounts in the studied samples. The present results show that further work is needed in order to fully understand the mineralogical changes suffered by continental sandstones during heating. The characterization of such changes occurred during laboratory routines is relevant, since they can help to better understand natural processes.  相似文献   

桩底注浆钻孔灌注桩承载力的研究     

李连营  林波  邵建 《岩土工程技术》2005,19(1):24-27

通过天津地区几例钻孔灌注桩桩底注浆的静载荷试桩结果 ,分析天津地区钻孔灌注桩桩底注浆单桩竖向极限承载力标准值的估算方法  相似文献   

Elastic behavior of weakly cemented contact          下载免费PDF全文

V. Langlois 《国际地质力学数值与分析法杂志》2015,39(8):854-860

We investigate the elastic behavior of weakly cemented contact. We show that the radial distribution of stresses and the stiffnesses of a cemented contact are governed by the ratio a/RΛ, where R, a, and Λ are, respectively, the grain radius, the contact size, and the ratio of the elastic moduli of cement and grains. Moreover, we show that a cemented contact is always less stiff than a Hertzian contact having a similar size. Finally, we propose accurate approximate expressions of the contact stiffnesses. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Chemo‐mechanics of cemented granular solids subjected to precipitation and dissolution of mineral species          下载免费PDF全文

Giuseppe Buscarnera  Arghya Das 《国际地质力学数值与分析法杂志》2016,40(9):1295-1320

This paper studies the chemo‐mechanics of cemented granular solids in the context of continuum thermodynamics for fluid‐saturated porous media. For this purpose, an existing constitutive model formulated in the frame of the Breakage Mechanics theory is augmented to cope with reactive processes. Chemical state variables accounting for the reactions between the solid constituents and the solutes in the pore fluid are introduced to enrich the interactions among the microstructural units simulated by the model (i.e., grains and cement bonds). Two different reactive processes are studied (i.e., grain dissolution and cement precipitation), using the chemical variables to describe the progression of the reactions and track changes in the size of grains and bonds. Finally, a homogenization strategy is used to derive the energy potentials of the solid mixture, adopting probability density functions that depend on both mechanical and chemical indices. It is shown that the connection between the statistics of the micro‐scale attributes and the continuum properties of the solid enables the mathematical capture of numerous mechanical effects of lithification and chemical deterioration, such as changes in stiffness, expansion/contraction of the elastic domain, and development of inelastic strains during reaction. In particular, the model offers an interpretation of the plastic strains generated by aggressive environments, which are here interpreted as an outcome of chemically driven debonding and comminution. As a result, the model explains widely observed macroscopic signatures of geomaterial degradation by reconciling the energetics of the deformation/reaction processes with the evolving geometry of the microstructural attributes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

A numerical study of mechanical behavior of a cement paste under mechanical loading and chemical leaching          下载免费PDF全文

Y. Jia  H.B. Bian  S.Y. Xie  N. Burlion  J.F. Shao 《国际地质力学数值与分析法杂志》2017,41(18):1848-1869

Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented.  相似文献   

Free allocation in the 3rd EU ETS period: assessing two manufacturing sectors     

Christian Stenqvist  Max Åhman 《Climate Policy》2016,16(2):125-144

This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.

Policy relevance

After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies.  相似文献   

Stabilisation/solidification and bioaugmentation treatment of petroleum drill cuttings     

《Applied Geochemistry》2016

Petroleum drill cuttings are usually treated by techniques suitable for particular contaminant groups. The significance of this study consists in the development of a treatment technology that can simultaneously handle the hydrocarbon and metal constituents of drill cuttings. Bioaugmentation is combined with stabilisation/solidification (S/S), within S/S monoliths and in granulated S/S monoliths. Portland cement was used for S/S treatment at 30% binder dosage. Bioaugmentation treatment involved two bacterial densities of a mixed culture bio-preparation. The effects of inclusion of compost, fertiliser and activated carbon were also evaluated. After 28 days, the combined S/S and bioaugmentation treatments recorded up to 15% higher total petroleum hydrocarbon (TPH) loss than control S/S treatment without bioaugmentation. Embedding fertiliser, activated carbon and higher bacterial density within S/S monoliths resulted in the highest (99%) TPH reduction but higher concentrations of metals. The addition of compost and lower bacterial density to granulated S/S monoliths led to similar (98%) TPH degradation and lower amounts of metals. The results suggest that with better mixture optimisation, combining S/S and bioaugmentation could engender more sustainable treatment of drill cuttings.  相似文献