Incremental elastoplastic FEM for simulating the deformation process of suction caissons subjected to cyclic loads in soft clays     

《Applied Ocean Research》2016

This paper presents an incremental elastoplastic finite element method (FEM) to simulate the undrained deformation process of suction caisson foundations subjected to cyclic loads in soft clays. The method is developed by encoding the total-stress-based bounding surface model proposed by the authors in the ABAQUS software package. According to the model characteristics, elastoplastic stress states associated with the incremental strains of each iteration are determined using the sub-incremental explicit Euler algorithm, and the state parameters describing the cyclic accumulative rates of strains are updated by setting state variables during the calculations. The radial fallback method is also proposed to modify the stress states outside the bounding surface to the surface during determination of the elastoplastic stress states. The stress reversals of soil elements are judged by the angle between the incremental deviatoric stress and the exterior normal vector at the image stress point on the bounding surface to update the mapping centre and state variables during cyclic loading. To assess the general validity of the method, the reduced scale model tests and centrifuge tests of suction caissons subjected to cyclic loads are simulated using the method. Predictions are in relative good agreement with test results. Compared with the limit equilibrium and quasi-static methods, the method can not only determine the cyclic bearing capacity, but can also analyse the deformation process and the failure mechanisms of suction caisson under cyclic loads in soft clays.  相似文献   

Leachate studies on fly ash-stabilised expansive clay liners     

M. Uma Shankar 《Geomechanics and Geoengineering》2016,11(2):114-118

This paper presents leachate studies on fly ash-stabilised expansive clay liners. Fly ash in different contents (0%, 10%, 20% and 30%) by dry weight of the expansive clay was added to the clay, and the ash-clay blend was compacted as a liner overlying a compacted lateritic clay layer. Deionised water (DIW) and calcium chloride (CaCl₂) solutions of varying concentration (5 mM, 10 mM, 20 mM, 50 mM, 100 mM and 500 mM) were used as the permeating fluids in the leachate studies. Chemical analysis of the leachate was performed. For a given CaCl₂ concentration, the concentrations of both calcium ion and chloride ion in the leachate decreased up to a fly ash content of 20%, and thereafter they increased when the fly ash content was increased to 30%. Further, for a given fly ash content, concentrations of calcium ion and chloride ion increased with increasing CaCl₂ concentration.  相似文献   

Rotation Center and Horizontal Bearing Capacity of the Bucket Foundation in Soft Ground     

Xiaowei Tang  Xiwen Zhang  Qi Shao  Zhenqing Li 《Marine Georesources & Geotechnology》2016,34(6):594-601

In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity.  相似文献   

Numerical Studies on Piled Gravity Base Foundation for Offshore Wind Turbine     

Yun Wook Choo  Ji-hoon Seo  Young-Nam Kim  Jeong-min Goo  Young-ho Kim 《Marine Georesources & Geotechnology》2016,34(8):729-740

This study aims to investigate a hybrid gravity base foundation to support offshore wind tower. A new hybrid gravity base foundation considered in this study has five component piles, referred to as ‘piled gravity base foundation’. The three-dimensional finite element analyses were carried out for the piled gravity base foundation subjected to a combined load with a lateral load and overturning moment. The parametric analyses were undertaken varying the loading height and direction, the rigidity of the piled gravity base foundation, the field soil layers, and the clay strength. Overall, the response of the piled gravity base foundation was significantly influenced by the interaction between the cone base piles and the surrounding soil. The increased strength of the soil led to a significant reduction of the pile and gravity base foundation responses, in terms of the bending moments, axial forces, lateral displacements, and rotations.  相似文献   

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments     

B. Liu 《Marine Georesources & Geotechnology》2016,34(3):280-292

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.  相似文献   

Evaluation of Effective Depth of PVD Improvement in Soft Clay Deposit: A Field Case Study     

Jun Chen  Zhen-Yu Yin  Ye-Shuang Xu  Suksun Horpibulsuk 《Marine Georesources & Geotechnology》2016,34(5):420-430

This article presents a case history of determination of effective depth of prefabricated vertical drains (PVDs) under embankment loading on a very soft clay deposit in central China, near Jiujiang, Jiangxi Province. The height of the embankment was 5.3 m and construction time was about one year. The PVDs were installed to a depth of 8.5 m at a spacing of 1.5 m in a triangular pattern. Field observations and the finite element method (FEM) were employed to analyze the performance of the soft deposit during embankment construction. The influential depth of the embankment loading was evaluated based on settlement, excess pore pressure, and stress increase in subsoil, both from the observed data and FEM analysis. The effective PVD depth was determined in the following ways: (1) the depth of 5% subsoil settlement of surface settlement; (2) vertical stress increase in subsoil of 25% in-situ stress; and (3) consolidation time/PVD depth relation by FEM. Based on the analysis, the effective depth of PVDs was determined to be between 10 and 12.8 m for this field case.  相似文献   

坑式钢管静压桩在地基加固中的应用     

周军怀  李向阳  柴卓 《探矿工程》2018,45(11):56-59

坑式钢管静压桩是解决既有建筑物因软弱土层地基产生沉降变形的一种技术方法。针对山西北化关铝化工有限公司质检楼地基沉降变形及工程地质条件,提出了采用坑式钢管静压桩进行加固处理的设计方案,介绍了坑式钢管静压桩施工方案和施工流程及注意事项;总结了施工过程中遇到的问题,并对施工后的监测数据进行了分析。结果表明,坑式钢管静压桩施工对软弱地基加固效果良好,可成功地解决软弱土层产生的地基沉降开裂问题。  相似文献   

软土区旋喷式插筋微型桩工艺试验研究     

吴越琛  王进明  陆舟超 《探矿工程》2018,45(12):74-78

软土地质条件下建筑物的沉降变形和承载力要求越来越高,对基础施工工艺提出了较高要求。在高压旋喷施工工艺的基础上,提出旋喷式插筋微型桩施工工艺,开展了微型桩工艺试验研究,结果表明该工艺大幅提高了单桩桩基承载性能,为实际工程应用提供了技术数据支持。  相似文献   

Factors influencing undrained strength of fine-grained soils at high water contents     

H. B. Nagaraj  M. V. Sravan  B. S. Deepa 《Geomechanics and Geoengineering》2018,13(4):276-287

Understanding the undrained strength of fine-grained soils has been of interest to geotechnical researchers from many practical considerations. In several civil engineering applications, water content of soil is quite high being near or above the liquid limit of soils, and understanding the factors responsible for imparting the strength of soil at high water contents is of great significance. Recently, it has been reported in the literature that the shear strength of soils at these limiting water contents has significant variation. However, the reasons and the factors that probably influence for this variation have not been reported in the literature. This experimental investigation is an attempt in the direction of understanding the reasons for the variation in the undrained strength at higher limiting water content, namely liquid limit considering the various influencing factors like clay mineralogy and fine-sand content present in soil used for determining liquid limit. The results from this study are quite revealing and have been explained based on the mechanisms controlling the undrained strength at liquid limit.  相似文献   

长春地区粉质黏土导热系数与其物性参数相关性研究     

姚仁  杜立志  吕守航  沈明燮 《世界地质》2018,37(3):976-981

为研究导热系数与影响因素之间的相关关系,建立导热系数的推算公式,以长春地区粉质黏土为研究对象,对原状土样的导热系数与其物理参数之间的相关性进行回归分析。制作9个重塑土样,测其相关的参数值,以验证回归方程的适用性。结果表明,回归分析建立导热系数与2个物理参数之间的关系式不成立;考虑天然密度、含水率和孔隙度为自变量,其分别对应的相关性系数T检验显著值(Sig)都0. 05,复决定系数为0. 886,建立的回归方程成立,自变量能准确解释因变量的变化,且含水率与导热系数呈负相关,天然密度和孔隙度呈正相关。重塑土样相关参数代入回归方程得到的导热系数值与实验实测值之间相对误差低于4%,验证了该回归方程的普遍性和适用性。  相似文献