马超营断裂带地质及地球化学特征     

燕建设 《河南国土资源》1996,(2)

根据对马超营断裂带系统进行的地质—地球化学剖面研究，探讨了该带断裂构造活动及其元素地球化学迁移富集规律与构造地球化学分异之间的关系；分析了蚀变、矿化与成矿的关系，认为早期面型蚀变伴有成矿元素的活化和迁移，但无矿化富集，后期带状蚀变伴有金的富集成矿且以硅化、绢云母化为主要标志。从而，为马超营断裂带这一重要的以金为主成矿带的进一步工作、研究，提供了地球化学方面的依据。  相似文献   

Structural and metamorphic controls on the distribution of zircon in an evolving quartzofeldspathic migmatite: an example from the Reynolds Range, central Australia     

P. DIRKS  M. HAND 《Journal of Metamorphic Geology》1991,9(2):191-201

Three types of zircon occur in a complexly deformed and variably migmatized quartzofeldspathic gneiss from the Reynolds Range, central Australia. The oldest type is inherited from the granitic precursor of the gneiss, and is overgrown by a second group of zircon grains that formed during prograde, granulite facies metamorphism. Partial melting of the gneiss resulted in solution of both the inherited and metamorphic zircon. No new zircon growth accompanied crystallization of the partial melt, suggesting loss of zirconium–rich residual fluids. Hydrous, amphibolite facies retrogression of the gneiss and its migmatized variants during late shearing produced new, idiomorphic zircon in both the shear zone and its wall rocks.
Important implications of this study are that (i) zircon has a tendency to dissolve if it comes into direct contact with a melt produced from anhydrous biotite breakdown in a quartzofeldspathic granulite, (ii) melt crystallization is not necessarily accompanied by zircon growth, and (iii) euhedral zircon can grow from a hydrous fluid phase under subsolidus, amphibolite facies conditions, e.g. within shear zones.  相似文献   

常德1631年大震事件的多场点群发式构造模型     

甘家思  刘锁旺  申重阳 《大地测量与地球动力学》1993,(4)

根据对常德1631年地震事件的史料鉴别,尤其是江陵为典型七度震害这一事实,运用震声传播方向和地光物理场以及地震烈度衰减关系,拟合推断此地震事件的序列主要由安乡北6 3/4级地震、常德北太阳山7级地震、澧县6级地震、大庸6级地震和澧县—安乡6 1/2级地震组成,相应的地震地质背景是江汉—洞庭地区晚更新世以来的剩余形变呈四象限分布。若考虑地震-构造相关分布为“Z”字型,则该地震事件的主控构造——太阳山断裂带东断裂具左旋走滑的力学机制。根据区域地震—构造相关发展过程,常德大震事件可视为1668年郯城8 1/2级地震的前震序列组成部分。  相似文献   

辽宁省金矿成矿作用研究     

杨占兴 《国土资源》1997,(1)

辽宁省是我国重要的金矿产地之一。省内金矿可划分为岩浆热液型、陆相火山岩型、同韧性剪切变质热液型、变质—岩浆热液叠生型、砂砾岩型及河相冲积型（砂金矿）六种类型。金矿的形成与特定的地层、构造、岩浆岩密切相关。稳定同位素资料表明，金矿的成矿物质主要来源于古老的结晶基底——太古宙变质杂岩（第一矿源层）及早元古宙中浅变质岩（衍生矿源层）；含矿热液主要为岩浆水，变质水和大气水，且多为两种水的混合物；大气水在成矿作用中占有重要地位。金矿的成矿演化经历了太古代－早元古代矿源层及同韧性剪切变质热液金矿床、晚三叠纪－燕山早期岩浆热液及叠生型矿床及燕山晚期陆相火山岩型矿床三个形成阶段。  相似文献   

坡麓地带工程勘察应注意的问题     

许钊根 《浙江国土资源》1994,(1)

在坡麓地带进行工程勘察时，应注意论证工程建设对工程地质环境的改变，评价其对设计、施工的适宜性和可行性，采取相应的工程技术措施。  相似文献   

新疆尾亚韧性剪切带的基本特征及其意义     

邵铁全  刘云焕  董玉书 《地球科学与环境学报》2001,23(4):28-32

尾亚韧性剪切带形成于石炭纪晚期.根据其宏观变形构造、显微变形构造等变形特征,说明其经历了早期的推覆剪切和后期的右行推覆剪切两个主要演化阶段.对该区的构造演化及指导找矿增添了一点新的内容.  相似文献   

Kinematic wave solutions for pollutant transport over an infiltrating plane with finite‐period mixing and mixing zone     

V. P. Singh 《水文研究》2002,16(12):2441-2477

Kinematic wave solutions are derived for transport of a conservative non‐point‐source pollutant during a rainfall‐runoff event over an infiltrating plane for two cases: (i) finite‐period mixing and (ii) soil‐mixing zone. Rainfall is assumed to be steady, uniform and finite in duration, and it is assumed to have zero concentration of pollutants. Infiltration is assumed constant in time and space. Prior to the start of rainfall, the pollutant is distributed uniformly over the plane. In the first case, when rainfall occurs, the mixing of pollutant in the runoff water occurs in a finite period of time. In the second case, the chemical concentration is assumed to be a linearly decreasing function of rainfall intensity and overland flow. The solute concentration and discharge are found to depend on the flow characteristics as well as the solute concentration parameters. The characteristics of solute concentration and discharge graphs seem to be similar to those reported in the literature and observed in laboratory experiments. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

A simplified analysis of interface failure under compressive normal stress and monotonic or cyclic shear loading     

Zenon Mrz  Marcin Bia&#x;as 《国际地质力学数值与分析法杂志》2005,29(4):337-368

Interface damage and delamination is usually accompanied by frictional slip at contacting interfaces under compressive normal stress. The present work is concerned with an analysis of progressive interface failure using the cohesive crack model with the critical stress softening and frictional traction present at the contact. Both monotonic and cyclic loadings are considered for anti‐plane shear of an elastic plate bonded to a rigid substrate by means of cohesive interface. An analytical solution can be obtained by neglecting the effect of minor shear stress component. The analysis of progressive delamination process revealed three solution types, namely: short, medium and long plate solutions. The long plate solution was obtained under an assumption of quasistatic progressive growth of the delamination zone. In view of snap back response, the quasistatic deformation process cannot be executed by either traction or displacement control. The states of frictional slip accompanied by shake down or incremental failure are distinguished in the case of cyclic loading, related to load amplitude and structural dimensions. The analysis provides a reference solution for numerical treatment of more complex cases. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

“翻台法”提高地震定位精度的数学原理     

李胜乐  严尊国  郑文衡 《大地测量与地球动力学》1997,(3)

对于震中偏离台网情况下的地震定位，常规方法定位效果较差。“翻台法”有效地提高了其定位精度。从均匀地壳模型的走时方程组出发，分析了“翻台法”定位中方程组系数的变化特点，推导了选取最佳翻转台站的方法，并得出如下结论：（１）“翻台法”增加了原定位方程组的约束方程，翻台数与已知条件和所求参数个数有关，从理论上讲，翻转台数超过独立的约束方程数时对增加定位精度不再有意义；（２）考虑到具体的台网布局和台站资料质量，翻转不同台站对提高地震定位精度所起的作用大小各不相同，因而存在选取最佳翻转台站问题。  相似文献   

Structural and stratigraphical constraints on the kinematics history of the Southern Tan–Lu Fault Zone during the Mesozoic Anhui Province, China     

J.L. Mercier  Minjing Hou  P. Vergly  Yongming Wang 《Tectonophysics》2007,439(1-4):33-66

The Tan–Lu Fault Zone (TLFZ) extends in a NNE–SSW direction for more than 2000 km in Eastern China. It has been considered either as a major sinistral strike-slip fault, as a suture zone or as a normal fault. We have conducted a structural analysis of the southern segment of this fault zone (STLFZ) in the Anhui Province. The ages (Triassic to Palaeocene) of the formations affected by the faults have been re-appraised taking into account recent stratigraphical studies to better constraint the ages of the successive stages of the kinematics of the STLFZ. Subsequently, the kinematics of the faults is presented in terms of strain/stress fields by inversion of the striated fault set data. Finally, the data are discussed in the light of the results obtained by previous workers.We propose the following history of the STLFZ kinematics during the Mesozoic. At the time of collision, a  NNE orientated Tan–Lu margin probably connected two margins located north of the Dabie and Sulu collision belts. During the Middle–Late Triassic, the SCB has been obliquely subducted below the NCB along this margin which has acted as a compressional transfer zone between the Dabie and Sulu continental subduction zones. The STLFZ has been initiated during the Early Jurassic and has acted as a sinistral transform fault during the Jurassic, following which the NCB/SCB collision stopped. A  NW-trending extension related to metamorphic domes was active during the basal Early Cretaceous ( 135–130 Ma); it has been followed by a NW–SE compression and a NE–SW tension during the middle–late Early Cretaceous ( 127 to  105 Ma, possibly  95 Ma); at that time the TLFZ was a sinistral transcurrent fault within the eastern part of the Asian continent. During the Late Cretaceous–Palaeocene, the STLFZ was a normal fault zone under a WNW–ESE tension.  相似文献