复杂条件下深圳汝南大厦基础工程方案的优选与实践     

周嘉陵  兰凯 《地质科技情报》2005,24(Z1):93-96

位于复杂地质条件和环境条件下的深圳汝南大厦在基坑支护的施工过程中出现钻进困难,必须重新选择基础工程施工方案.结合场地特殊地质和环境条件在对人工挖孔桩、换填法、树根桩法、旋喷桩复合地基等8种基础工程施工方案进行分析与优选的基础上,借助模糊决策理论进行方法优选验算,最终选定了人工挖孔桩加部分钻(冲)成孔灌注桩的方案.采用该方案在深圳市汝南大厦的施工实践表明其施工效果良好.  相似文献   

现浇薄壁管桩复合地基非线性有限元分析     

周云东  杨寿松 《华东地质学院学报》2005,28(3):234-238

现浇薄壁管桩是处理大面积软土地基的一项新技术,目前已在沿海软土地区高速公路建设中得到了一定的应用,但其产生的时间较短,开展的研究相对较少,利用Plaxis岩土工程有限元软件对现浇薄壁管桩（PCC桩）的工作特性、荷载传递规律及其影响因素、加固机理等方面进行了详细的分析,结果表明,桩外壁摩阻力随桩深近乎呈线性分布,桩内壁摩擦力只在桩下端一定长度内有所发挥,桩芯土体具有较好的闭塞效应,研究成果具有较大的指导意义.  相似文献   

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China          下载免费PDF全文

S.‐J. Wang  L. Wang  M. Brown  P. M. Piccoli  T. E. Johnson  P. Feng  H. Deng  K. Kitajima  Y. Huang 《Journal of Metamorphic Geology》2017,35(6):601-629

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.  相似文献   

斜列构造型式空间定位研究及其对隐伏矿脉预测的意义     

杨飞  杨人毅  王辰  吕古贤  王宗永  黄钗第 《地质论评》2016,62(S1):361-362

斜列状的断裂、裂隙的排列组合,其中往往充填岩脉或矿脉,被称之为雁列或斜列构造。在内生脉状多金属矿床平面或剖面上,矿脉常出现斜列状排列的组合特征,关于它们的组合型式,特别是从空间上及定位分布规律方面,尚缺乏深入的研究。本文依据构成斜列型式的几个主要几何要素之间的关系将其划分为三种类型,进行了斜列构造型式空间定位分布特征的研究及其对隐伏矿脉预测意义的探讨。  相似文献   

冰盖下矩形河道的综合糙率          下载免费PDF全文

陈刚  张玉蓉  周密  顾世祥 《水科学进展》2016,27(2):290-298

综合糙率是采用曼宁公式确定河道水位和流量关系的关键参数。在河道冰封期,冰盖的出现增加了流动的阻力,明流条件下确定的综合糙率不再适用,需要重新估算。基于Einstein阻力划分过流断面的原理,冰盖下矩形河道的过水断面可划分为冰盖区、河床区和边壁区。根据总流的连续性方程,在确定各分区糙率系数、水力半径和断面面积的基础上,提出了冰盖下矩形河道综合糙率的计算公式。采用已有的试验水槽测量数据和天然河道实测资料对公式进行了验证,结果表明:公式计算的综合糙率与实测值吻合较好,与Einstein公式和Sabaneev公式相比,计算精度更高;对于冰封水流,宽浅河道采用分区水深代替水力半径进行简化计算的条件有别于明渠水流,在宽深比大于20时,计算结果才满足精度要求。  相似文献   

利用两种指纹因子判别小流域泥沙来源   总被引：2，自引：0，他引：2       下载免费PDF全文

陈方鑫  张含玉  方怒放  史志华 《水科学进展》2016,27(6):867-875

为精确识别黄土高原丘陵沟壑区典型小流域泥沙来源,分析了流域内“源-汇”地区土壤的理化性质及生物标志物（正构烷烃）作为潜在指纹识别因子,并建立了复合指纹模型。结果显示:单独的土壤理化指纹及正构烷烃均不能有效识别泥沙来源;土壤理化指纹和正构烷烃分别在林地、农地及沟道的辨别上显示出其局限性。多元化的复合指纹（碳优势指数CPI、Ca、TP、C₂₀、C₂₉、Fe）则能辨别90.5%的泥沙来源。模型结果显示沟道是该流域泥沙的主要来源,占60.8%,其次为农地占20.7%,林地占11.3%,草地占7.2%。研究表明,结合生物标志物的复合指纹法能更精确地反映泥沙来源,适用于各泥沙源头的地质条件差异较小的流域,对黄土高原小流域水土流失治理具有指导意义。  相似文献   

华南大规模低温成矿的主要科学问题   总被引：9，自引：7，他引：2  

胡瑞忠  付山岭  肖加飞 《岩石学报》2016,32(11):3239-3251

大面积低温成矿是全球独特的重要成矿事件。华南地区扬子地块西南部面积约50万平方千米的广大范围,低温矿床广泛发育,包括卡林型金矿床、MVT型Pb-Zn矿床和脉型锑、汞、砷等矿床,构成华南低温成矿域。该成矿域由川滇黔接壤区的Pb-Zn、右江盆地Au-Sb-As-Hg和湘中盆地Sb-Au等三个矿集区组成。其中的矿床主要赋存于沉积岩中,受断裂构造控制,形成于100~250℃的低温条件下。以往的研究取得了重要进展,但成矿时代、成矿动力学背景、成矿物质基础和成矿过程等关键科学问题一直悬而未决。近年的研究表明,这些矿床可能形成于200~230Ma(印支期)和130~160Ma(燕山期)两个时期,除川滇黔Pb-Zn矿集区由盆地卤水演化成矿外,其余两个矿集区的形成可能均受印支期和燕山期的深部岩浆活动驱动,尽管成矿流体中的水主要是大气成因地下水。本专题报道了近年来这些方面的最新研究进展,包括20篇文章,主要涉及这些低温矿床的地质地球化学特征、成矿时代、矿床成因和成矿动力学背景等。  相似文献   

小兴安岭霍吉河钼矿床成矿过程——透岩浆成矿作用     

王泉  刘东舟  郭鸿斌 《地质与资源》2018,27(3):243-250

传统上将小兴安岭霍吉河钼矿床归类为斑岩型钼矿.通过对矿区地质特征的研究,即矿区无斑岩体、矿体围绕隐爆角砾岩呈环状出露、石英细脉-网脉状和浸染状矿石结构、成矿年龄明显晚于赋矿围岩形成时间等,认为该矿床是透岩浆成矿作用的结果.早中生代伊春-延寿花岗岩岩基带上相伴的大型-超大型钼矿是典型的透岩浆成矿作用的产物,是岩基后成矿作用.  相似文献   

Genesis and Metallogenic Process of the Lujing Uranium Deposit,Southwest Jiangxi Province,China: Constraints of Micropetrography and S–C–O Isotopes     

《Resource Geology》2018,68(3):303-325

The Lujing uranium deposit, located in the southeastern part of the Nanling metallogenic province, is one of the representative granite‐related hydrothermal uranium deposits in South China. Basic geology, geochemistry, and geochronology of the deposit have been extensively studied. However, there is still a chronic lack of systematic research on the genesis and metallogenic process of the deposit. Thus, we recently carried out an electron microprobe and stable isotopic analysis. The main research results and progresses are as follows: Uranium minerals in this deposit include coffinite, pitchblende, and uranothorite, and small amounts of uranium exist in accessory minerals in the form of isomorphism. Coffinite, which occurs predominantly as the pseudomorphs after pitchblende, also occurs as a primary mineral and is locally formed from the remobilization of uranium from adjacent uranium‐bearing minerals. The mineralizing fluid was originally composed of a magmatic fluid generated by late Yanshanian magmatism. The high As content of pyrite in ores may reflect the addition of meteoric water, or the formation water (or both), to the magmatic hydrothermal system. The δ³⁴S values vary from −14.4‰ to 13.9‰ (mean δ³⁴S = −3.9‰), showing a range that is similar to nearby Cambrian metamorphic strata and Indosinian granites, indicating that these host rocks represent the source of sulfur; however, the possibility of a mantle source cannot be completely ruled out. According to our new isotopic data and recent Pb isotopic data, we conclude that the uranium in ores was derived by leaching dominantly from the uranium‐rich host rocks, especially the Cambrian metamorphic strata. The δ¹³C_PDB values (−8.75‰ to 1.40‰; mean δ¹³C_PDB = −5.41‰) and δ¹⁸O_SMOW values (5.45–18.62‰; mean δ¹⁸O = 13.02‰) of reddish calcite from the ore‐forming stage suggest that the CO₂ in the mineralizing fluids was derived predominantly from the mantle, with a small component contributed by marine carbonates. Based on these new data and previous research results, this paper proposes that uranium metallogenesis in the Lujing deposit is closely associated with mafic magmatism resulting from crustal extension during the Cretaceous to Paleogene in South China.  相似文献   

Jurassic and Cretaceous (Yanshannian) tectonics,magmatism and metallogenesis in South China: preface     

Xiaoyong Yang  Weidong Sun 《International Geology Review》2018,60(11-14):1321-1325

ABSTRACT

South China is famous for its poly-metal deposits, with more than 50% of global W and Sb reserves, 20% of global Sn reserves, as well as abundant Cu-Mo-Pb-Zn-Au-Ag, Ta, Nb, REE and U deposits. This special issue consists of 21 papers, reporting recent progress on Yanshannian tectonic evolution, magmatism and ore deposits in South China, aiming at better understandings on the Mesozoic large-scale magmatism and mineralization events.  相似文献