空间互相关方法在分析海底沙波迁移规律中的应用     

甘雨  马小川  阎军 《海洋学报》2019,41(4):42-52

海底沙波具有显著的活动性并能够对海底工程设施造成潜在威胁，因此对海底沙波活动性的评估一直以来受到广泛关注。目前大多数研究者仍利用平面剖面对比来分析海底沙波的迁移特征。然而，该方法难以全面高效地获取海底沙波二维平面迁移矢量。本文基于2007年和2009年的高分辨率多波束测深数据，详细阐述了空间互相关方法在分析北部湾东南海域海底沙波迁移规律中的应用过程。利用实测数据进行对比分析，获得了研究区海底沙波的活动特征，并进一步讨论了空间互相关算法中不同参数的选取对结果的影响。结果显示，利用空间互相关分析方法能够有效获取海底沙波二维迁移矢量，获得的海底沙波迁移速率和迁移方向与前人研究成果吻合，表明了该方法的可行性和可靠性。但在对实际DTM数据进行空间互相关分析时，需根据海底沙波形态、数据质量等因素选取合适的参数及矢量获取方法。本研究实验了一种确定海底沙波迁移规律的新方法，该方法将有效提升获得海底地形变化规律的效率和准确度，可获得更加精细的海底地形动力过程。  相似文献   

An analytical study on three‐dimensional versus two‐dimensional water table‐induced flow patterns in a Tóthian basin          下载免费PDF全文

Jun‐Zhi Wang  Xiao‐Wei Jiang  Zhi‐Yuan Zhang  Li Wan  Xu‐Sheng Wang  Hailong Li 《水文研究》2017,31(22):4006-4018

Although it has been increasingly acknowledged that groundwater flow pattern is complicated in the three‐dimensional (3‐D) domain, two‐dimensional (2‐D) water table‐induced flow models are still widely used to delineate basin‐scale groundwater circulation. However, the validity of 2‐D cross‐sectional flow field induced by water table has been seldom examined. Here, we derive the analytical solution of 3‐D water table‐induced hydraulic head in a Tóthian basin and then examine the validity of 2‐D cross‐sectional models by comparing the flow fields of selected cross sections calculated by the 2‐D cross‐sectional model with those by the 3‐D model, which represents the “true” cases. For cross sections in the recharge or discharge area of the 3‐D basin, even if head difference is not significant, the 2‐D cross‐sectional models result in flow patterns absolutely different from the true ones. For the cross section following the principal direction of groundwater flow, although 2‐D cross‐sectional models would overestimate the penetrating depth of local flow systems and underestimate the recharge/discharge flux, the flow pattern from the cross‐sectional model is similar to the true one and could be close enough to the true one by adjusting the decay exponent and anisotropy ratio of permeability. Consequently, to determine whether a 2‐D cross‐sectional model is applicable, a comparison of hydraulic head difference between 2‐D and 3‐D solutions is not enough. Instead, the similarity of flow pattern should be considered to determine whether a cross‐sectional model is applicable. This study improves understanding of groundwater flow induced by more natural water table undulations in the 3‐D domain and the limitations of 2‐D models accounting for cross‐sectional water table undulation only.  相似文献   

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits          下载免费PDF全文

Renato P. Almeida  Bernardo T. Freitas  Bruno B. Turra  Felipe T. Figueiredo  André Marconato  Liliane Janikian 《Sedimentology》2016,63(3):609-628

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.  相似文献   

Geochemical and isotopic characterization of trace fossil infillings: New insights on tracemaker activity after the K/Pg impact event     

《Cretaceous Research》2016

Geochemical and isotopic analyses of the Cretaceous–Paleogene (K/Pg) boundary deposits were conducted at the Caravaca section (External Subbetic, southeast of Spain) in order to evaluate the recovery of the macrobenthic tracemaker community and the bioturbational disturbance. Samples from the infilling material of several lower Danian dark-colored trace fossils (Chondrites, Planolites, Thalassinoides and Zoophycos) located in the uppermost 8-cm of the light upper Maastrichtian strata, as well as samples from the host sedimentary rock of these trace fossils, were analyzed and compared with data from the lower Danian deposits. The values of element ratios indicative of extraterrestrial contamination (Cr/Al, Co/Al and Ni/Al) are higher in the infilling trace fossil material than in the upper Maastrichtian and lower Danian deposits, which suggests a contribution of the ejecta layer. Regarding the isotope composition, the δ¹³C values are lower in the infilling material than in the Maastrichtian host sedimentary rocks surrounding the traces, while the δ¹⁸O are higher in the infilling material. The geochemical and isotopic compositions of the infilling material evidence the unconsolidated character of the sediment, including the red boundary layer. Softground conditions confirm a relatively rapid recovery by the macrobenthic tracemaker community, starting a few millimeters above the K/Pg boundary layer. The mixture of the infilling material of the trace fossils moreover reveals a significant macrobenthic tracemaker activity affecting K–Pg boundary transition sediments that may have significantly altered original signatures.  相似文献   

断面成果数据输出软件的开发及实现     

吴锦发 《测绘工程》2016,25(2):77-80

断面测量的成果一般采用CASS软件绘制成图,但无法输出不同格式的数据文件。以武夷新区崇阳溪保护性开发河道断面测量数据成果为例,对断面数据进行分析,进行技术方法研究,在AutoCAD平台上综合运用Visual LISP和Visual BASIC进行软件开发,编程解决断面成果不同数据格式的输出问题。软件简单实用,并具有批处理功能,具有较好的推广使用价值。  相似文献   

Landsat 8热红外数据定标参数的变化及其对地表温度反演的影响   总被引：1，自引：0，他引：1  

徐涵秋 《遥感学报》2016,20(2):229-235

Landsat系列卫星上的TIRS热红外传感器数据已被大量应用,针对TIRS数据的地表温度反演也相继开发出一些算法,并有一些研究对TIRS数据的定标及其地表温度反演算法的精度进行了对比。本文主要就TIRS热红外传感器定标参数的变化,结合这些定标参数变化的时间点对有关地表温度反演算法的适用性和有效性进行分析,特别是对劈窗算法是否适合当前的TIRS数据进行了讨论,以使用户能够对Landsat 8 TIRS热红外数据的正确使用有进一步的认识。总的看来,由于视域外杂散光的影响,TIRS数据的定标精度仍达不到设计目标,TIRS第11波段的不确定性仍成倍大于TIRS 10波段。因此,在Landsat团队未彻底解决这一问题之前,同时用TIRS第10、第11这两个差距较大的波段构成的劈窗算法来反演地表温度,其精度存在较大的不确定性,US6-S团队仍在致力于改进第11波段的精度,改进后的波段可以用劈窗策法。目前应以TIRS第10单波段的方式来反演地表温度为宜。  相似文献   

激电测量在苏吉泉东金矿勘查中的应用          下载免费PDF全文

韩琼  弓小平  田红彪 《地质找矿论丛》2016,31(1):108-115

对苏吉泉东金矿进行激电测量,获得激电异常数据(电阻率ρ_s和视极化率η_s)。把不同测线上性质相同的电阻率ρ_s和视极化率η_s的反交点按对应关系联接起来,分别作为相应的破碎带和极化体位置,同时结合地质资料多次反馈,逐步逼近真实地质体。圈定了PSD1,PSD2两个破碎带和Jht1,Jht2,Jht3三个极化体,通过ρ_s和η_s的一维反演及二维反演,拟合出破碎带和极化体的形态特征及相对深度,为矿产勘探提供了较为明确的地球物理依据。  相似文献   

辽河油田东部凹陷玄武岩测井特征分析     

左程吉  陆哲昆  王宏伟  王祝文 《世界地质》2016,35(4):1095-1100

针对辽河油田东部凹陷地区复杂火成岩岩性中玄武岩的测井特征,根据东部凹陷的测井数据及取芯段的薄片识别,共找到4种不同类型的玄武岩地层,分两组进行对比分析。第一组:气孔玄武岩、角砾化玄武岩;第二组:玄武岩、含油水层的玄武岩。利用玄武岩地层对应数据制作测井响应统计表,对比不同类型测井参数的差别制作交会图,得到角砾化玄武岩相对气孔玄武岩有较高的自然电位值,含油水层的玄武岩相对玄武岩有较高自然伽马值及中子值等特征。分析原因为气孔玄武岩及角砾化玄武岩孔隙裂缝发育,密度较低,黏土矿物充填角砾化玄武岩孔隙使自然电位值相对较高;含油水层的玄武岩中大量氢元素使中子值及自然伽马值相对玄武岩有所增加。  相似文献   

华北中南部地区石盒子群沉积环境研究新进展     

李增学  李晓静  王东东  刘莹  陈晓燕  吕大炜  张增奇  梁吉坡  刘海燕  王平丽 《地球学报》2016,37(5):615-625

华北地区石盒子群的沉积环境长期以来一致存在较大的争议,大多数研究者认为该时期完全为陆相沉积,也有一些学者在该地层中发现了海相沉积物。本文着重对鲁西、河南等地区石盒子群的奎山砂岩进行岩石学、沉积学、地球化学等指标研究,在该砂岩中发现了冲洗交错层理,并在该砂岩中上部发现了海绿石的存在。通过详细分析奎山砂岩中海绿石的显微特征、元素地球化学特征,并进行比较研究发现,华北地区奎山砂岩中海绿石的化学成分、含量与国内外古代的海相、过渡相海绿石基本一致,推断其为滨浅海富氧环境的产物。华北地区奎山砂岩中发育的沉积构造和所含海绿石的元素地球化学特征,揭示了该时期曾发生过海侵,反映了石盒子群沉积期沉积环境的复杂性。华北地区石盒子群奎山砂岩中上部海相沉积环境的确定,可能改变华北盆地二叠纪以来单纯为陆相沉积的认识,这为精细研究华北地区中晚二叠世的盆地格局、充填演化及恢复古地理景观,提供了新的思路和重要依据。  相似文献   

北京平原区地质剖面的初步建立——太古宙结晶基底和元古宙地层          下载免费PDF全文

吕金波  郑桂森  李良景  王海波  刘凯  王纯君 《中国地质》2016,(3):879-889

北京平原目前尚未建立系统的地质剖面。1867年庞培莱将北京西山分为3大系,1871年李希霍芬提出震旦系、划分12层。1922年葛利普将震旦系限定在前寒武系,1923年田奇镌将南口剖面划分为7个岩组,1934年高振西将震旦系3分(南口群、蓟县群、青白口群)。1976年乔秀夫3分青白口群(下马岭组、龙山组和景儿峪组),1980年汪长庆等将十三陵剖面分为4系12组,1991版《北京市区域地质志》将十三陵剖面分为3系12组。本文初步建立平原区地层表,详细描述太古宙结晶基底和元古宙地层剖面,在京南大兴区的榆垡(兴热-1井)和安定(兴热-2井)发现太古宙片麻岩,在京热-70井、京热-59井、京热-71井和京热-75井编录蓟县纪地层,利用亦庄小学钻孔厘定待建系下马岭组、青白口纪龙山组和景儿峪组。  相似文献