仿生高效切削齿试验研究          下载免费PDF全文

高科  唐琼琼  孙阳  谢晓波 《探矿工程》2016,43(8):69-71

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。  相似文献   

冰层取心回转钻进模拟实验台的设计与测试          下载免费PDF全文

陈云望  曹品鲁  龙翔  陈宝义  杨成 《探矿工程》2016,43(5):31-36

极地钻探实践表明,冰盖底部冰岩交界附近地质情况异常复杂,不但可能存在暖冰、基底融水,甚至还存在厚度不等的冰岩夹层,取心钻探异常困难,而优选钻头类型、确定合理的钻进参数是保证其安全、快速钻进的重要因素。本文设计了一套能够模拟冰层回转钻进的实验台,其技术参数为：钻压、转速分别可在0～10 kN、0～300 r/min范围内调节,最大扭矩约100 N·m。该实验台能够测量钻头切削具温度、钻孔深度及钻进速度等参数,为深入研究钻头类型及结构参数、钻进参数对扭矩、钻速和切削温度的影响规律提供了手段。采用PDC复合片钻头进行了冰钻实验,结果表明,实验台能够准确调节钻压和转速,可满足实验要求。  相似文献   

The terrestrial fauna of the Late Triassic Pant-y-ffynnon Quarry fissures,South Wales,UK and a new species of Clevosaurus (Lepidosauria: Rhynchocephalia)     

Emily Keeble  David I. Whiteside  Michael J. Benton 《Proceedings of the Geologists' Association. Geologists' Association》2018,129(2):99-119

Pant-y-ffynnon Quarry in South Wales yielded a rich cache of fossils in the early 1950s, including articulated specimens of new species (the small sauropodomorph dinosaur Pantydraco caducus and the crocodylomorph Terrestrisuchus gracilis), but no substantial study of the wider fauna of the Pant-y-ffynnon fissure systems has been published. Here, our overview of existing specimens, a few described but mostly undescribed, as well as freshly processed material, provides a comprehensive picture of the Pant-y-ffynnon palaeo-island of the Late Triassic. This was an island with a relatively impoverished fauna dominated by small clevosaurs (rhynchocephalians), including a new species, Clevosaurus cambrica, described here from a partially articulated specimen and isolated bones. The new species has a dental morphology that is intermediate between the Late Triassic Clevosaurus hudsoni, from Cromhall Quarry to the east, and the younger C. convallis from Pant Quarry to the west, suggesting adaptive radiation of clevosaurs in the palaeo-archipelago. The larger reptiles on the palaeo-island do not exceed 1.5?m in length, including a small carnivorous crocodylomorph, Terrestrisuchus, and a possible example of insular dwarfism in the basal dinosaur Pantydraco.  相似文献   

A model for integrated spatial land use characteristics linking to surface nutrient concentration   总被引：1，自引：0，他引：1  

Erqi Xu 《International Journal of Digital Earth》2018,11(10):1064-1084

Quantifying land use heterogeneity helps better understand how it influences biophysical systems. Land use area proportions have been used conventionally to predict water quality variables. Lacking an insight into the combined effect of various spatial characteristics could lead to the statistical bias and confused understanding in previous studies. In this study, using spatial techniques and mathematical models, a diagnostic model was developed and applied for quantifying and incorporating three spatial components, namely, slope, distance to sampling spots, and arrangement. The upper catchment of Miyun Reservoir was studied as the test area. Total nitrogen, total phosphorus, and chemical oxygen demand of water samples from field measurements were used to characterize the surface water quality in 52 sub-watersheds. Using parameter calibrations and determinations, combined spatial characteristics were explored and detected. Adjusted land use proportions were calculated by spatial weights of discriminating the relative contribution of each location to water quality and used to build the integrated models. Compared with traditional methods only using area proportions, our model increased the explanatory power of land use and quantified the effects of spatial information on water quality. This can guide the optimization of land use configuration to control water eutrophication.  相似文献   

冻土机械切削破碎机理的研究进展   总被引：1，自引：1，他引：0  

李龙  周琴  张凯  凌雪  张在兴  李耀 《冰川冻土》2021,43(2):638-649

冻土开挖困难、破碎效率低是高寒地区工程建设、地基施工等面临的技术难题。冻土机械切削破碎是冻土开挖的主要方法,其机理研究是提高冻土破碎效率的前提和基础。首先总结了温度、含水率、围压等对冻土复杂力学特性的影响,进而调研分析了冻土机械切削破碎的典型切削力学模型,发现冻土切削机械破碎模式不仅与冻土力学特性密切相关,也与切削参数和刀具结构直接相关,冻土切削过程中存在着最优的切削前角（30°~60°）,且深切削和浅切削时冻土内部受力方式存在差异也会导致破坏形式的不同;温度、含水率、围压所造成的冻土力学性能变化会直接导致冻土破坏过程和切削破碎机理的改变,冻土强度随着温度降低表现出先升高然后保持稳定的特性,随着含水率升高呈现出先升高后降低的趋势,冻土破碎存在脆性、塑脆过渡及塑性等不同破坏形式。通过系统总结冻土切削破碎机理研究进展,进一步明确了冻土力学性质主要影响因素、变化特点及其切削破坏损伤特征,为冻土机械切削破碎的切削参数和切削具结构优化提供了设计依据。  相似文献   

铣削斜楔形区域形成及其对流场负压区的影响规律     

沈灿  李广慧  尹凝霞  薛姣  谭光宇 《广东海洋大学学报》2019,(3):109-114

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。  相似文献   

基于面片裁切技术的点云轮廓线生成算法     

甄宗坤  蔡东健 《测绘与空间地理信息》2019,42(4):141-143,149,152

随着点云在各个领域的广泛应用,对点云处理相关技术的研究更为活跃。目前,研究的热点主要集中在点云去噪、配准、分割、增强、特征提取和重建等方面。其中,特征提取起着承前启后的作用,具有十分重要的研究价值。基于面片裁切技术的点云轮廓线生成算法。首先,对点云数据进行面片提取,通过面片生长、融合生成特征面片,并根据提出的面片双向索引法快速构造特征线,最终实现点云平面轮廓线的生成。实验证明,本算法可快速、准确、有效地实现点云轮廓线的生成。  相似文献   

中国南海北部珠江口-琼东南盆地钻井岩屑地球化学特征及深水区天然气聚集特征     

高岗  张功成  陈果  刚文哲  沈怀磊  赵科 《海洋学报(英文版)》2018,37(2):44-53

The Qiongdongnan Basin and Zhujiang River(Pearl River) Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact of oil-base mud on TOC content and Rock-Eval parameters of cutting shale samples, the authors did comprehensive analysis of source rock quality, thermal evolution and control effect of source rock in gas accumulation of the Qiongdongnan and the Zhujiang River Mouth Basins. The contrast analysis of TOC contents and Rock-Eval parameters before and after extraction for cutting shale samples indicates that except for a weaker impact on Rock-Eval parameter S_2, oil-base mud has certain impact on Rock-Eval S_1, Tmax and TOC contents. When concerning oil-base mud influence on source rock geochemistry parameters, the shales in the Yacheng/Enping,Lingshui/Zhuhai and Sanya/Zhuhai Formations have mainly Type Ⅱ and Ⅲ organic matter with better gas potential and oil potential. The thermal evolution analysis suggests that the depth interval of the oil window is between 3 000 m and 5 000 m. Source rocks in the deepwater area have generated abundant gas mainly due to the late stage of the oil window and the high-supper mature stage. Gas reservoir formation condition analysis made clear that the source rock is the primary factor and fault is a necessary condition for gas accumulation. Spatial coupling of source, fault and reservoir is essential for gas accumulation and the inside of hydrocarbon-generating sag is future potential gas exploration area.  相似文献   

不同排列方式和间隙比下双圆柱流致振动特性研究   总被引：1，自引：0，他引：1  

刘巨保  杨明  岳欠杯  丁宇奇  姚利明 《海洋工程》2018,36(4):105-113

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。  相似文献   

Estimating the crush zone size under a cutting tool in coal     

R. K. Zipf Jr.  Z. T. Bieniawski 《Geotechnical and Geological Engineering》1988,6(4):279-295

Summary As part of an effort to understand the mechanics of fine fragment formation in coal, which is important in studies of respirable dust due to mining, fracture toughness measurements and the strain energy density (SED) theory were applied to calculate the crush zone size under a cutting tool in coal. This zone is the major source of fine fragments in the 1 to 10 µm size range. The model used in these calculations is a boundary element program containing a failure criterion based on the SED theory. The boundary element program calculates linear elastic stresses at numerous points in the coal material ahead of a cutting bit. These stresses are then input to a subroutine called critical flaw length and orientation (CFLO) which uses the SED theory to determine the CFLO for a small crack at the boundary element stress computation point. The extent of crushing is based on earlier postulates about the role of inherent flaws in a fragmentation process. To form 1 to 10 µm fragments requires firstly a local stress strong enough to activate flaws with a characteristic length less than 1 to 10 µm and secondly, a flaw density sufficient to provide an average spacing between flaws also on the order of 1 to 10 µm. The locus of active 10 µm flaws represents the maximum possible extent of fine fragmentation in the 10 µm or less size range assuming that a sufficient inherent flaw density exists. The approach offers a first order approximation to the extent of crushing under a tool tip. The size and shape of the crush zone volume is affected by the attack angle and geometry of the tool.  相似文献