超长DX桩在软土地区某高层建筑中的应用     

鲍生谋 《岩土工程技术》2007,21(3):156-159

DX桩是在钻、冲孔灌注桩基础上发展起来的一种变截面的新桩型。由于其桩身多个扩径体(承力盘或承力岔)能承受较大的荷载,充分发挥扩径体周边土体的承载力,从而大幅度提高单桩承载力。介绍了DX多节挤扩灌注桩及在浙江软土地区某高层建筑桩基工程中的应用效果。  相似文献   

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems     

Jianwei Song Yi-Lun Chu Zach Liang George C. Lee 《地震工程与工程振动(英文版)》2007,6(1):1-10

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.  相似文献   

Loss of energy dissipation capacity from the deadzone in linear and nonlinear viscous damping devices     

Mai Tong Thomas Liebner 《地震工程与工程振动(英文版)》2007,6(1):11-20

In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper’s initial stroke as it moves away from its neutral position. This phenomenon is referred to as the effect of “deadzone”. The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect of deadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers. An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 356 for calculation of equivalent damping if a deadzone is to be considered.  相似文献   

接地电阻测量中应注意的几个问题   总被引：1，自引：0，他引：1  

杨德荣  梁丹 《广西气象》2007,28(2):72-74

参照国家有关规范和标准的要求，对接地装置、接地电阻及其测量原理进行分析和总结，指出4102型和摇表式接地电阻仪测量接地电阻时电极的布置方法对测量结果的影响。  相似文献   

地面-坑道激电测深方法在山东玲珑断裂带深部找矿中的应用     

李忠平 《地质与勘探》2020,56(4):783-791

在山东玲珑断裂带深部找矿中,考虑断裂带处在地电干扰和地形变化复杂地段,且深部地质体产状变化较大,仅依据半空间地面物探方法很难摸清地质体的展布形态,盲目布设钻孔会造成找矿成本的提高。为精确反演深部矿体的边界范围、走向及倾向,提高钻孔见矿率,降低找矿成本,在山东玲珑断裂带地面、坑道采用立体物探技术,试验通过布设多条方位不同的地-坑、坑-坑和地-地纵横激电中梯剖面和双向三极测深剖面,进行了二维电法剖面反演。在地面-坑道激电测深方法中,地面-坑道供电,坑道测量探测深度与坑道深度呈正相关,反映了深部巷道底板以下电阻率和极化率的分布状况,可以实现深地探测目的。由于地面-坑道供电,坑道测量装置处在半空间和全空间两个部分,需要采用"镜像法"和地下倾斜偶极源电流场特征对其装置系数k值重新推导,以反映坑道空间岩矿体真实电阻率的变化。坑道中梯剖面异常与单向三极剖面异常、双向三极电测深反演结果对应较好。经钻探验证,矿体分布与物探推断高极化体基本一致,为快速准确布设深部钻孔提供资料。  相似文献   

软土层施工桩基的新方法滚压法          下载免费PDF全文

江天寿 《探矿工程》1998,(2):22-23

介绍软土层用新型孔底工具－滚压器施工桩基的工作原理、施工工艺,滚压器基本结构及不同直径滚压器的技术特征。  相似文献   

低周反复荷载作用下复合耗能支撑钢筋混凝土框架结构的抗震性能试验研究   总被引：3，自引：0，他引：3  

王曙光  刘伟庆  蓝宗建  张炳凡  杨蕾蕾  崇峻 《地震工程与工程振动》1998,18(3):124-130

本文介绍了三榀钢支撑钢筋混凝土框架结构（包括两榀复合耗能支撑框架、一榀普通支撑框架）在低周反复荷载作用下的试验结果。对复合耗能支撑框架结构在低周反复荷载作用下的工作性能（包括受力性能、破坏形态、滞回曲线、骨架曲线、延性和耗能能力等）进行了探讨,揭示了复合耗能支撑框架结构良好的抗震性能。  相似文献   

Prediction of overland flow and seepage zones associated with the interaction of multiple infiltration devices (cascading infiltration devices)     

David D. J. Antia 《水文研究》2008,22(14):2595-2614

Infiltration devices are traditionally evaluated as standalone entities that do not interact with each other. A model is outlined that will allow interactions between proposed infiltration devices to be predicted prior to a development commencing. The model allows prediction of seepage into downslope devices and the assessment of the locations where the combined ground‐water mound will reach the surface and result in overland flow. The volume of overland flow discharged by the seepage zone may exceed the overland and piped flow received by the infiltration devices. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

A nonlinear PDE formulation for offshore vessel pipeline installation     

Gullik A. Jensen  Niklas Säfström  Thor I. Fossen 《Ocean Engineering》2010,37(4):365-2819

In this paper a nonlinear dynamic PDE formulation for a pipe string suspended from a pipelay vessel to the seabed in a pipelay operation is developed. This model extends a three-dimensional beam model capable of undergoing finite extension, shearing, twist and bending, to apply for marine applications by adding the effects of restoring forces, hydrodynamic drag and seabed interaction. The model is validated against the natural catenary equation and the FEM code RIFLEX. The model is extended to include the pipelay vessel dynamics by applying a potential theory formulation of a surface vessel, suited for dynamic positioning and low speed maneuvering, as a boundary condition for the PDE. This system is found to be input-output passive and stable. Pipeline installation applications where the presented model is suited are e.g., analysis and simulation of the installation operation, operability analysis, hardware-in-the-loop (HIL) testing for vessel control systems, and automation of the pipelay operation.  相似文献   

The journal Communications in Numerical Methods in Engineering with Biomedical Applications becomes the International Journal for Numerical Methods in Biomedical Engineering (IJNMBE) from 1st January 2010     

Perumal Nithiarasu  Rainald Löhner 《国际地质力学数值与分析法杂志》2009,33(16):1769-1770

Communications in Numerical Methods in Engineering, founded by Roland W. Lewis in 1985, will change its title to the ‘International Journal for Numerical Methods in Biomedical Engineering’ and has a revised Aims and Scope. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献