Macropores as preferential flow paths in meander bends          下载免费PDF全文

Garrett T. Menichino  Adam S. Ward  Erich T. Hester 《水文研究》2014,28(3):482-495

Macropores are subsurface connected void spaces caused by processes such as fracture of soils, micro‐erosion, and fauna burrows. They are common near streams (e.g. hyporheic and riparian zones) and may act as preferential flow paths between surface and groundwaters, affecting hydrologic and biogeochemical processes. We tested the hydrologic function of macropores by constructing an artificial macropore within the saturated zone of a meander bend (open macropore, ‘OM’) and later filling its upstream end (partially filled macropore, ‘PFM’). For each treatment, we injected saline tracer at an upgradient monitoring well within the meander and monitored downgradient hydraulics and tracer transport. Pressure transducers in monitoring wells indicated hydraulic gradients within the meander were 32% higher perpendicular to and 6% higher parallel to the macropore for the OM than for the PFM. Additionally, hydraulic conductivities measured via falling head tests were 29 to 550 times higher along the macropore than in nearby sediment. We used electrical conductivity probes in wells and electrical resistivity imaging to track solute transport. Transport velocities through the meander were on average 9 and 21% higher (per temporal moment analysis and observed tracer peak, respectively) for the OM than for the PFM. Furthermore, temporal moments of tracer breakthrough analysis indicated downgradient longitudinal dispersion and breakthrough tracer curve tailing were on average 234% and 182% higher for the OM, respectively. This suggests the OM enabled solute transport at overall shorter timescales than the matrix but also increased tailing. Our results demonstrate the importance of macropores to meander bend hydrology and solute transport. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Ressi experimental catchment: Ecohydrological research in the Italian pre-Alps     

Giulia Zuecco  Chiara Marchina  Ylenia Gelmini  Anam Amin  H. J. van Meerveld  Daniele Penna  Marco Borga 《水文研究》2021,35(3):e14095

Ressi is a small (2.4 ha) forested catchment located in the Italian pre-Alps. The site became an experimental catchment to investigate the water fluxes in the soil–plant–atmosphere continuum and the impact of vegetation on runoff generation in 2012. The elevation of the catchment ranges from 598 to 721 m a.s.l. and the climate is humid temperate. The bedrock consists of rhyolites and dacites; the soil is a Cambisol. The catchment is covered by a dense forest, dominated by beech, chestnut, maple, and hazel trees. The field set up includes measurements of the rainfall in an open area, streamflow at the outlet, soil moisture at various depths and locations, and depth to water table in six piezometers at a 5- or 10-min interval. Samples of precipitation, stream water, shallow groundwater and soil water are collected monthly for tracer analysis (stable isotopes (²H and ¹⁸O), electrical conductivity and major ions), and during selected rainfall–runoff events to determine the contribution of the various sources to runoff. Since 2017, soil and plant water samples have been collected to determine the sources of tree transpiration. Data collected in the period 2012–2016 are publicly available. Data collection is ongoing, and the data set is expected to be updated on an annual basis to include the most recent measurements.  相似文献   

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers          下载免费PDF全文

Benoît Dewandel  Yvan Caballero  Jérôme Perrin  Alexandre Boisson  Fabrice Dazin  Sylvain Ferrant  Subash Chandra  Jean‐Christophe Maréchal 《水文研究》2017,31(12):2277-2295

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.  相似文献   

A long‐term study of stable isotopes as tracers of processes governing water flow and quality in a lowland river basin: the upper Thames,UK          下载免费PDF全文

W. George Darling  Michael J. Bowes 《水文研究》2016,30(13):2178-2195

A long‐term study of O, H and C stable isotopes has been undertaken on river waters across the 7000‐km² upper Thames lowland river basin in the southern UK. During the period, flow conditions ranged from drought to flood. A 10‐year monthly record (2003–2012) of the main River Thames showed a maximum variation of 3‰ (δ¹⁸O) and 20‰ (δ²H), although interannual average values varied little around a mean of –6.5‰ (δ¹⁸O) and –44‰ (δ²H). A δ²H/δ¹⁸O slope of 5.3 suggested a degree of evaporative enrichment, consistent with derivation from local rainfall with a weighted mean of –7.2‰ (δ¹⁸O) and –48‰ (δ²H) for the period. A tendency towards isotopic depletion of the river with increasing flow rate was noted, but at very high flows (>100 m³/s), a reversion to the mean was interpreted as the displacement of bank storage by rising groundwater levels (corroborated by measurements of specific electrical conductivity). A shorter quarterly study (October 2011–April 2013) of isotope variations in 15 tributaries with varying geology revealed different responses to evaporation, with a well‐correlated inverse relationship between Δ¹⁸O and baseflow index for most of the rivers. A comparison with aquifer waters in the basin showed that even at low flow, rivers rarely consist solely of isotopically unmodified groundwater. Long‐term monitoring (2003–2007) of carbon stable isotopes in dissolved inorganic carbon (DIC) in the Thames revealed a complex interplay between respiration, photosynthesis and evasion, but with a mean interannual δ¹³C‐DIC value of –14.8 ± 0.5‰, exchange with atmospheric carbon could be ruled out. Quarterly monitoring of the tributaries (October 2011–April 2013) indicated that in addition to the aforementioned factors, river flow variations and catchment characteristics were likely to affect δ¹³C‐DIC. Comparison with basin groundwaters of different alkalinity and δ¹³C‐DIC values showed that the origin of river baseflow is usually obscured. The findings show that long‐term monitoring of environmental tracers can help to improve the understanding of how lowland river catchments function. Copyright © NERC 2015. Hydrological Processes © 2015 John Wiley & Sons, Ltd.  相似文献   

Metals discharged during different flow conditions from a mixed agricultural‐forest catchment (NW Spain)          下载免费PDF全文

F. Soto‐Varela  M. L. Rodríguez‐Blanco  M. M. Taboada‐Castro  M. T. Taboada‐Castro 《水文研究》2015,29(6):1644-1655

Metal loads were determined from water samples collected under different streamflow conditions (baseflow and storm events) in a rural catchment (NW Spain) during 4 years. A study at annual, seasonal and storm‐event scales was carried out. In all analysed scales, the export order was Fe > Al > Mn > Zn > Cu. A high inter‐annual, seasonal and storm‐event scale variability of metal load was observed. The total metal loads in stream were higher during baseflow conditions than during storm events, which only represented 4% of the duration of the study period and 25% of streamflow. During storm events, both Al and Fe loads accounted 45% of the total load of the study period, whereas Mn, Cu and Zn loads represented 42%, 33% and 24%, respectively. This highlights the role of high flows on metal export. Only four big events exported around 30% of load of each metal transported in events. At all time scales, a prevalence of export of particulate metals over dissolved metals was observed, more pronounced for Al, Fe and Mn than for Cu and Zn. The export of metals in the Corbeira catchment is influenced by runoff and, to a lesser extent, by the rainfall amount. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

多角度倾斜摄影技术在自动纹理映射上的应用     

王卿 《测绘与空间地理信息》2016,(10):198-200

利用多角度倾斜摄影技术获取的倾斜影像成果来更新和构建城市三维实景纹理映射成为数字城市建设中的一个重要应用。本文采用基于DLG和3Dmax生成的建筑物模型,结合SWDC-5的多角度倾斜影像,通过自动选择纹理、自动编辑纹理、自动纹理映射等一系列步骤,自动生成大区域建筑物三维实景数字城市。并通过实验数据对该计算方法的可靠性进行验证,结果表明:该系统的数字化程度远远高于传统方法。  相似文献   

IEC的风机选型参数估算方法在中国的适用性研究     

黄林宏  宋丽莉  李刚  王丙兰  张永山 《气象》2016,42(12):1522-1530

国际电工委员会编制的《风力发电机组设计要求》(IEC 61400-1)推荐了针对风电机组安全等级评估的极端风速和湍流强度特征值估算方法,因其简单便捷,在风电领域被广泛采用。利用全国风能资源专业观测网的193座测风塔观测数据,对IEC推荐的极端风速计算方法与我国规范推荐的基于极值I型概率分布方法进行比较,发现两种方法计算的193座塔70 m高度层50年一遇10 min平均最大风速,仅有7座测风塔较为一致,差异在±1%;IEC推荐方法的计算结果多数偏小,其中偏小10%以上的测风塔有121座,偏小30%以上的有44座测风塔,而偏大10%以上的只有9座测风塔;IEC方法计算的极值风速大幅度偏小的测风塔主要分布在台风影响的东南沿海地区,偏差较小的测风塔主要分布在西北和华北地形平缓区域,但同时偏大10%以上的测风塔也多分布在这一地区。以目前行业领域普遍采用的以15 m·s~(-1)风速的平均湍流强度作为风电机组选型指标,与严格按照规范,以15 m·s~(-1)风速段所有样本湍流强度的90%分位数处的值作为指标进行风电机组等级确定作对比,发现193座塔中有46座塔的选型是不安全的,甚至相差两个等级。  相似文献   

辽宁地区不同降水云系雨滴谱参数及其特征量研究   总被引：1，自引：0，他引：1  

房彬  郭学良  肖辉 《大气科学》2016,40(6):1154-1164

利用位于辽宁省沈阳市和辽阳市的Parsivel（Particle Size and Velocity）激光雨滴谱仪观测到的雨滴谱资料按照积雨云降水系统、积层混合云降水系统和层状云降水系统分析雨滴谱特征量和谱参数的平均特征及随时间的演变特征。结果表明:Gamma分布拟合谱参数N₀和λ按照层状云、积层混合云和积雨云的顺序减小,谱参数μ按照层状云、积层混合云和积雨云的顺序增大;直径小于1 mm的降水粒子对数浓度的贡献最大,直径大于1 mm的降水粒子对雷达反射率的贡献最大;M-P分布的谱参数N₀与雨强I具有幂函数关系,并且随着雨强I的增大而增大,谱参数λ与雨强I具有指数函数关系,随着雨强I的增大而减小。  相似文献   

盾构施工参数与沉降变形关系模型构建     

张建坤  陈昌彦  陈浩 《测绘科学》2016,41(8):156-160

针对盾构施工参数变化对施工引起的地表变形的重要影响,该文构建了盾构施工参数与地表沉降变形关系模型。以北京市某地铁盾构区间施工过程中的实测数据为基础,分析了不同盾构施工参数与地表沉降变形的关联度和相关性,得到不同参数对沉降变形贡献值的大小;之后,利用多元回归模型方法建立主要影响参数与地表变形的关系模型,并进行模型的合理性检验;最后,利用该模型得到的沉降量与实测数据进行对比分析,结果显示符合性较好。  相似文献