石墨炉原子吸收光谱法测定土壤样品中镉   总被引：5，自引：0，他引：5  

卞莉  曹萍 《吉林地质》2005,24(2):115-117

采用磷酸氢二铵作基体改进剂塞曼扣背景石墨炉原子吸收光谱法测定土壤样品中镉，方法检出限DL=0．012μg／g，精密度RSD在3．55％～7．33％，满足了土壤样品中镉测定的镉质量要求。  相似文献   

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths   总被引：5，自引：1，他引：5  

Marcel Guillong  Kathrin Hametner  Eric Reusser  Stephen A. Wilson  Detlef Günther 《Geostandards and Geoanalytical Research》2005,29(3):315-331

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.  相似文献   

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction   总被引：3，自引：0，他引：3  

V. Palchik 《Environmental Geology》2005,48(1):68-80

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.  相似文献   

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission     

L. G. Tham  H. Liu  C. A. Tang  P. K. K. Lee  Y. Tsui 《Rock Mechanics and Rock Engineering》2005,38(1):1-19

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.  相似文献   

集聚空间组织型式对中国地市尺度工业SO2排放的影响     

胡志强  苗长虹  袁丰 《地理学报》2019,74(10):2045-2061

集聚外部性是集聚影响工业污染排放的重要机制,不同的集聚空间组织型式具有不同的污染排放行为和减排效果。以中国285个地市工业SO₂排放为例,依据集聚经济理论,将集聚空间组织型式细分为集聚密度、企业地理临近度、专业化、多样性、相关多样性、非相关多样性等不同类型,在系统分析工业SO₂排放与集聚空间格局的基础上,通过构建计量经济模型,考察了不同集聚空间组织型式对工业SO₂排放强度的影响。结果表明：① 工业SO₂排放强度与工业集聚密度在空间上具有非对称性,污染排放强度西高东低,工业集聚密度、企业地理临近、多样性、相关和非相关多样性为东中高西部低;② 工业集聚对工业SO₂排放强度的影响存在空间溢出效应,相邻地区集聚密度、多样性和相关多样性水平的上升有利于本区域工业污染排放强度的下降,但专业化水平的上升则会提升本区域的工业污染排放强度;③ 提高集聚密度、引导企业集中布局有利于工业SO₂排放强度下降,多样且关联的产业组织结构有利于污染减排,而专业化和非关联产业的集中会提高污染排放强度;④ 集聚型式对工业SO₂排放强度的影响存在区域和城市规模上的异质性,集聚密度、企业地理临近、多样性和相关多样性对中西部污染减排的作用比东部明显,专业化和非相关多样性不利于东中部地区的污染减排;城区人口规模20万以下的小城市提高集聚密度、减少多样性特别是非相关多样性更有利于污染减排;城区人口规模20~50万的小城市和50~100万的中等城市,提高企业的地理接近度和多样性水平特别是相关多样性水平,有利于其降低污染排放强度;城区人口规模在100万以上的大城市,提高集聚密度和产业多样性水平在一定程度上有利于其污染减排,但其减排效果因拥挤效应而明显下降;⑤ 进一步降低工业SO₂排放强度,需要走集聚化道路,坚持提高集聚密度,因地制宜引导企业集中布局,着力提高产业在关联基础上的多样性水平,加强区域间联防联控,重视区域间的产业联系与环保合作。  相似文献   

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions          下载免费PDF全文

Xiong Zhang  Jean‐Louis Briaud 《国际地质力学数值与分析法杂志》2015,39(13):1369-1409

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation          下载免费PDF全文

R. He  R.Y.S. Pak  L.Z. Wang 《国际地质力学数值与分析法杂志》2017,41(4):508-526

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

ROCKS & MINERALS DETERMINATION AND ANALYSIS     

《Abstract of Chinese Geological Literature》2014,(2)

正20140786Deng Zhenping(Institute of Karst Geology,Chinese Academy of Geological Sciences,Guilin 541004,China);Yang Wen-qiong Application of Stripping Voltammetry with a Solid Amalgam Electrode for Determination of Copper in a Tracer and Groundwater Tracing Experiment(Rock and Mineral Analy-  相似文献   

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method          下载免费PDF全文

Samila Bandara  Alessio Ferrari  Lyesse Laloui 《国际地质力学数值与分析法杂志》2016,40(9):1358-1380

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

利用LA-ICP-MS在16 μm和10 μm激光束斑条件下测定独居石U-Th-Pb年龄     

汪双双  韩延兵  李艳广  魏小燕  靳梦琪  程秀花 《岩矿测试》2016,35(4):349-357

我国锂钾主要矿产资源大多分布在西部偏远地区,其勘查找矿或综合利用迫切需要现场快速分析技术的支持。本文介绍了自行开发的便携式Li-K分析仪的主要性能及其在锂辉石中锂的分析应用。Li-K分析仪是一种基于大气压的液体阴极辉光放电光谱仪,以待测液体为放电阴极,实现样品中Li、K等元素的原子化和激发。该仪器以光纤传导CCD光谱仪作为检测器,其波长范围为345～1015 nm,分辨率3 nm;以Li 670.78 nm和K 769.90 nm分析谱线,在最佳仪器工作条件下测定Li、K的精密度（RSD,n=14）均低于2%,检出限为0.03 μg/mL,检测范围0.1～10 μg/mL。研究表明,不同酸度和酸的类型对谱线强度影响较大,且存在显著的样品基体效应,标准曲线法分析锂辉石中Li的结果偏差高达267%;而标准加入法可克服基体效应的影响,获得与ICP-OES一致性较好的分析结果,为现场开展固体样品中Li的测定奠定了基础。  相似文献