近十年来我国气候变暖影响研究的若干进展   总被引：51，自引：12，他引：51       下载免费PDF全文

王馥棠 《应用气象学报》2002,13(6):755-766

近年来，我国政府和科技界十分关注气候王馥棠变暖对我国经济发展可能影响的评估, 开展了许多重大项目和课题的研究。该文仅就气候变暖对我国自然植被、农业、森林、水资源、能源利用和区域海平面上升等领域影响评估研究的若干有意义的初步结果简要归纳和评述如下:取自不同GCM模型的未来气候变化情景下的影响评估模拟表明，我国的特征性自然植被类型将会发生明显的变化。同当前气候（1951~1980年）下的模拟分布相比，到2050年我国几乎所有地方的农业种植制度均将发生较大变化；气候变暖将导致复种指数增加和种植方式多样化，但降水与蒸散之间可能出现的负平衡和土壤水分胁迫的增加以及生育期的可能缩短，最终将导致我国主要作物的产量下降。气候变暖对我国水资源最明显的影响将会发生在黄淮海流域，这个区域的水资源供需短缺将大大提高。同时，气候变暖将改变我国室内取暖和降温的能源需求关系:北方冬季取暖的能源消耗将减少, 而南方夏季降温的能源消耗将会增加。海平面的上升将使我国三个主要沿海低洼脆弱区，即珠江三角洲、长江三角洲和黄河三角洲，面临部分遭受海水淹没的威胁。  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response     

Norio Hori  Norio Inoue 《地震工程与结构动力学》2002,31(9):1657-1679

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

25～75℃酸性NaCl溶液中方铅矿的溶解动力学   总被引：4，自引：0，他引：4  

张生  李建平  王玉荣  胡光黔 《地球化学》2002,31(6):587-592

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。  相似文献   

Isothermal annealing of partially metamict zircon: evidence for a three-stage recovery process     

T. Geisler 《Physics and Chemistry of Minerals》2002,29(6):420-429

 Raman spectroscopy and the powder diffraction technique have been used to monitor the recovery process of two partially metamict zircons (2.6 and 4.8 × 10¹⁸ α-decays g⁻¹) from Sri Lanka during a series of isothermal annealing experiments in the temperature range from 870 to 1622 K. These experiments show for the first time that structural recovery in partially metamict zircon proceeds via three distinct recovery stages, each of which occurs within a distinct time-temperature regime. Whereas the first two stages have previously been recognized (recovery of damaged crystalline remnants and epitaxial recrystallization), the third stage has not yet been identified as a single activated process. It is suggested that anisotropic defect annealing during the first stage at low temperatures, where the structure recovers preferentially along the a(b) plane, produces a geometrical situation where large structural rearrangements are necessary to remove the remaining defects inside the crystalline material. This situation is approximately reached when the amorphous domains start to recrystallize. The reason for anisotropic annealing can be found in a different connectivity between polyhedral linkages in both directions of the zircon lattice. High apparent activation energies, in the range of 6.4 to 7.9 eV, were determined for the third recovery stage from the Raman data, which are interpreted to reflect large structural rearrangements (i.e. polyhedral tilting) associated with the final recovery of the c axis. This explains the occurrence of a distinct recrystallization stage without defect annealing. Finally, it should be mentioned that the first recovery stage is not necessarily expected to occur in less damaged zircon crystals (<∼2 × 10¹⁸ α-decays g⁻¹), since less stable defects along the basal plane might have already been self-annealed during radiation damage accumulation under ambient temperatures. Received: 6 September 2001 / Accepted: 25 February 2002  相似文献   

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe     

Diana Ürge-Vorsatz  Adam Szeszler 《GeoJournal》2002,57(3):211-226

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

油压夯管锤蓄能器与活塞振动耦合性的数学解析          下载免费PDF全文

李国民 《探矿工程》2002,(1):52-54

蓄能器容积的变化与夯管锤的工作过程是紧密联系在一起的，由于活塞的前后运动以及在运动过程中的每一时刻所需要的油量不同的，理想状态就要通过蓄能器的容积变化来调节，就是说蓄能器的容积变化要与夯管锤的冲击振动相耦合。简要介绍了油压夯管锤结构原理，分别解释了油压夯管锤蓄能器与夯管锤的容积压力耦合。  相似文献   

A methodology for the evaluation of long-term volcanic risk from pyroclastic flows in Campi Flegrei (Italy)     

I. Alberico  L. Lirer  P. Petrosino  R. Scandone 《Journal of Volcanology and Geothermal Research》2002,116(1-2)

The volcanological history of Campi Flegrei suggests that the most frequent eruptions are characterized by the emplacement of pyroclastic flow and surge deposits erupted from different vents scattered over a 150-km² caldera. The evaluation of volcanic risk in volcanic fields is complex because of the lack of a central vent. To approach this problem, we subdivided the entire area of Campi Flegrei into a regular grid and evaluated the relative spatial probability of opening of vents based on geological, geophysical and geochemical data. We evaluated the volcanic risk caused by pyroclastic flows based on the formula proposed by UNESCO (1972), R=H×V×Va, where H is the hazard, V is the vulnerability and Va is the value of the elements at risk. The product H×V was obtained by performing simulations of type eruptions centered in each cell of the grid. The simulation is based on the energy cone scheme proposed by Sheridan and Malin [J. Volcanol. Geotherm. Res. 17 (1983) 187–202], hypothesizing a column collapse height of 100 m for eruptions of VEI=3 and 300 m for eruptions of VEI=4 with a slope angle of 6°. Each simulation has been given the relative probability value associated with the corresponding cell. We made use of the GIS software ArcView 3.2 to evaluate the intersection between the energy cone and the topography. The superposition of the areas invaded by pyroclastic flows (124 simulations for VEI=3 and 37 for VEI=4) was used to obtain the relative hazard map of the area. The relative volcanic risk map is obtained by superimposing the urbanization maps.  相似文献   

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures     

蒋欢军  吕西林 《地震工程与工程振动(英文版)》2002,1(2):227-237

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.  相似文献   

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析     

李慧峰  张玉蓉 《地震研究》2002,25(1)

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架  相似文献