自动确定图像二值化最佳阈值的新方法   总被引：38，自引：0，他引：38  

吴冰  秦志远 《测绘学院学报》2001,18(4):283-286

在详细分析二值化处理原理及当前技术的前提下，综合考虑图像的各种实际情况，提出了自动确定图像二值化阈值的增强大津法和边缘检测阈值法。多次实验表明，根据这两种方法确定的阈值对图像进行二值化处理，不仅可有效地解决图像灰度随地特征变化的图像处理问题，同时对于同一信号源的图像也有相当理想的处理效果，该方法可进一步应用于图像分割等。  相似文献   

Predicting DNAPL entrapment and recovery: the influence of hydraulic property correlation     

L. D.?LemkeEmail author  L. M.?Abriola 《Stochastic Environmental Research and Risk Assessment (SERRA)》2003,17(6):408-418

The influence of aquifer property correlation on multiphase fluid migration, entrapment and recovery was explored by incorporating correlated and uncorrelated porosity, permeability, and capillary pressure-saturation (P_c-Sat) parameter fields in a cross-sectional numerical multiphase flow model. Comparison of two-dimensional entrapped organic saturation distributions for a simulated tetrachloroethylene (PCE) spill in ensembles of aquifer realizations suggests that the degree of spatial correlation in P_c-Sat parameters exerts a controlling influence on dense nonaqueous phase liquid (DNAPL) spreading and redistribution in saturated aquifers. The predicted evolution of DNAPL source zones and resultant remediation efficiency under surfactant enhanced aquifer remediation (SEAR) also appear to be strongly influenced by the spatial correlation of aquifer parameters and multiphase flow constitutive relationships. Results for a limited number of realizations selected from each ensemble showed that removal of 60% to 99% of entrapped PCE could reduce dissolved contaminant concentration and mass flux by approximately two orders of magnitude under natural gradient conditions. Aqueous phase contaminant mass flux did not vary uniformly as a function of % DNAPL removed, however, and notable differences in behavior were observed for models incorporating correlated versus uncorrelated P_c-Sat and permeability fields. Although these results must be confirmed through analysis of additional realizations, it is likely that similar or larger differences between correlated and uncorrelated system behavior will be observed in aquifers with greater spatially variability than that of the nonuniform, homogeneous sand aquifer studied here. Funding for this research was provided by the United States Environmental Protection Agency, Great Lakes and Mid-Atlantic Center for Hazardous Substance Research under Grant No. R-825540, the Michigan Department of Environmental Quality under Contract No. Y80011, and the Strategic Environmental Research and Development Program under Project No. CU-1293. The content of this publication does not necessarily represent the views of these agencies and has not been subject to agency review.  相似文献   

The effect of heterogeneous stress and strain on metamorphic fluid flow,Mary Kathleen,Australia, and a model for large-scale fluid circulation *     

N. H. S. OLIVER  R. K. VALENTA  V. J. WALL 《Journal of Metamorphic Geology》1990,8(3):311-331

In the Proterozoic Mary Kathleen Fold Belt, northern Australia, infiltration of large volumes of externally derived fluid occurred synchronously with regional amphibolite-facies metamorphism and deformation. This paper develops a model of structurally controlled fluid migration by comparing the distribution of fossil fluid pathways with the inferred stress and strain patterns during the deformation. Intense fluid flow was localized within strong, relatively brittle meta-intrusive bodies, and in discrete, veined, brecciated and altered zones around their margins. In metasediments folded in a ductile manner outside these areas, fluid infiltration was negligible. The direct correlation between structural styles and the magnitude of veining and metasomatism suggests control of permeability enhancement, and hence fluid flow, by deformation. Finite difference modelling of a strong body in a weaker matrix has been used to evaluate the variation of stresses during the deformation, from which it is clear that stress and strain heterogeneities have systematically influenced the development and maintenance of metamorphic fluid pathways. Particular regions in which mean stress may be significantly lower than the average lithostatic pressures include the ‘strain shadow’zones adjacent to the strong bodies, other dilatant zones around the bodies, and the bodies themselves. This geometry is favourable not only for localized brittle deformation under amphilobite facies conditions, but also for focused fluid flow in the low mean stress regions, as evidenced by the abundance of veins. Fluid access through these metamorphic aquifers occurred during tensile failure episodes, with particularly large dilations and decimetre-scale veining in areas of strain incompatibility. It appears likely that fluid circulated many times through the Fold Belt, with flow concentrated in the metamorphic aquifers. A model is developed that explains both the structurally focused fluid flow and the postulated multi-pass recirculation by dilatancy pumping, the ‘pump engines’comprising the low mean stress zones.  相似文献   

生物降解原油中吡咯氮化合物组成的变化   总被引：1，自引：0，他引：1  

朱扬明  顾圣啸  赵春花  郝芳  邹华耀 《地球化学》2010,39(4):337-344

渤海海域地区近50个原油样品中性氮组分的GC／MS定量分析资料表明,油藏中的生物降解作用对原油的吡咯氮化合物含量和分布有明显影响。经与同源未降解原油比较,各种烷基咔唑和苯并咔唑在3。4级中轻度降解油中就出现明显降解迹象,随生物降解程度增高其含量逐渐减少,在6—8级严重降解油中它们的总含量降低到原有的五分之一左右。在3—4级中轻度降解油中,裸露型甲基咔唑异构体更容易被微生物侵袭而代谢,抗生物降解能力按1-甲基咔唑〉4-甲基咔唑〉2-、3-甲基咔唑顺序递减;当降解程度更高时,这些化合物降解速率相当,1-／4-MCA等比值相对稳定。低-中等降解阶段,不同类型二甲基咔唑异构体的抗生物降解能力也存在明显差异性,呈屏蔽型〉半屏蔽型〉裸露型降低;在生物降解水平进一步增高时,这些异构体之间的相对含量变化不大。生物降解作用对苯并咔唑系列化合物分布的影响具有不确定性,且随降解程度的增加变得更为显著,降解油中【a】／[c】苯并咔唑比值或增高或降低。生物降解原油中吡咯氮化合物的组成变化,使降解油的二次运移示踪面临新的问题。  相似文献   

Mud dispersal across a Cretaceous prodelta: Storm‐generated,wave‐enhanced sediment gravity flows inferred from mudstone microtexture and microfacies     

A. Guy Plint 《Sedimentology》2014,61(3):609-647

Determining sediment transport direction in ancient mudrocks is difficult. In order to determine both process and direction of mud transport, a portion of a well‐mapped Cretaceous delta system was studied. Oriented samples from outcrop represent prodelta environments from ca 10 to 120 km offshore. Oriented thin sections of mudstone, cut in three planes, allowed bed microstructure and palaeoflow directions to be determined. Clay mineral platelets are packaged in equant, face‐face aggregates 2 to 5 μm in diameter that have a random orientation; these aggregates may have formed through flocculation in fluid mud. Cohesive mud was eroded by storms to make intraclastic aggregates 5 to 20 μm in diameter. Mudstone beds are millimetre‐scale, and four microfacies are recognized: Well‐sorted siltstone forms millimetre‐scale combined‐flow ripples overlying scoured surfaces; deposition was from turbulent combined flow. Silt‐streaked claystone comprises parallel, sub‐millimetre laminae of siliceous silt and clay aggregates sorted by shear in the boundary layer beneath a wave‐supported gravity flow of fluid mud. Silty claystone comprises fine siliceous silt grains floating in a matrix of clay and was deposited by vertical settling as fluid mud gelled under minimal current shear. Homogeneous clay‐rich mudstone has little silt and may represent late‐stage settling of fluid mud, or settling from wave‐dissipated fluid mud. It is difficult or impossible to correlate millimetre‐scale beds between thin sections from the same sample, spaced only ca 20 mm apart, due to lateral facies change and localized scour and fill. Combined‐flow ripples in siltstone show strong preferred migration directly down the regional prodelta slope, estimated at ca 1 : 1000. Ripple migration was effected by drag exerted by an overlying layer of downslope‐flowing, wave‐supported fluid mud. In the upper part of the studied section, centimetre‐scale interbeds of very fine to fine‐grained sandstone show wave ripple crests trending shore normal, whereas combined‐flow ripples migrated obliquely alongshore and offshore. Storm winds blowing from the north‐east drove shore‐oblique geostrophic sand transport whereas simultaneously, wave‐supported flows of fluid mud travelled downslope under the influence of gravity. Effective wave base for sand, estimated at ca 40 m, intersected the prodelta surface ca 80 km offshore whereas wave base for mud was at ca 70 m and lay ca 120 km offshore. Small‐scale bioturbation of mud beds co‐occurs with interbedded sandstone but stratigraphically lower, sand‐free mudstone has few or no signs of benthic fauna. It is likely that a combination of soupground substrate, frequent storm emplacement of fluid mud, low nutrient availability and possibly reduced bottom‐water oxygen content collectively inhibited benthic fauna in the distal prodelta.  相似文献   

生物降解作用对烷基萘异构体分布的影响及其控制因素   总被引：1，自引：0，他引：1  

俞頔  崔志松  沈冰芳  李馨子  郑立  孙永革 《地球化学》2014,(2):149-156

在受到溢油污染的海滩上采集不同时间序列的石油样品,对芳烃组分烷基萘中的三甲基萘和四甲基萘各异构体的生物降解过程响应进行了详细分析。研究揭示,三甲基萘比四甲基萘更易被生物降解,其中1,2,7-三甲基萘、2,3,6-三甲基萘、2,3,6,7-四甲基萘、1,2,3,7-四甲基萘和1,3,5,7-四甲基萘等异构体具有相对较高的生物降解效率,与最近 Ostojié等利用理论模型计算所给出的降解序列十分一致,进一步证实了烷基萘在表生环境中的降解主要受控于异构体萘环上取代基的数量和位置。研究结果对于表生环境中萘系物类多环芳烃污染的生物修复评价具有重要指导意义。  相似文献   

An enhanced constitutive model for crushable granular materials     

Ali Daouadji  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2010,34(6):555-580

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Biodegradation and transport of benzene,toluene, and xylenes in a simulated aquifer: comparison of modelled and experimental results     

Jiin‐Shuh Jean  Ching‐Lang Tsai  Shen‐Haw Ju  Chun‐Wen Tsao  Shih‐Ming Wang 《水文研究》2002,16(16):3151-3168

Both laboratory experiments and numerical modelling were conducted to study the biodegradation and transport of benzene–toluene–xylenes (BTX) in a simulated semi‐confined aquifer. The factors incorporated into the numerical model include advection, hydrodynamic dispersion, adsorption, and biodegradation. The various physico‐chemical parameters required by the numerical model were measured experimentally. In the experimental portion of the study, BTX compounds were introduced into the aquifer sand. After the contaminants had been transported through the system, BTX concentrations were measured at 12 equally spaced wells. Subsequently, microorganisms obtained from the activated sludge of a sewage treatment plant and cultured in BTX mixtures were introduced into the aquifer through the 12 sampling wells. The distribution data for BTX adsorption by the aquifer sand form a nonlinear isotherm. The degree of adsorption by the sand varies, depending on the composition of the solute. The degradation time, measured from the time since the bacteria were added to the aquifer until a specific contaminant was no longer detectable, was 35–42 h for BTX. The dissolved oxygen, after degradation by BTX compounds and bacteria, was consumed by about 40–60% in the entire simulated aquifer; thus the aerobic conditions were maintained. This study provides insights for the biodegradation and transport of BTX in aquifers by numerical modelling and laboratory experiments. Experimental and numerical comparisons indicate that the results by Monod degradation kinetics are more accurate than those by the first‐order degradation kinetics. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

塔里木盆地塔河油田原油中生物标志化合物成熟度指标特征与石油运移     

郑朝阳  段毅  吴保祥  王传远 《沉积学报》2007,25(3):482-486

塔河油田是我国迄今为止在古生界海相碳酸盐岩层系中发现的最大的油气田,研究其中油气的运移是了解这种油气藏形成规律的重要环节。对塔河油田近几年开采的油井原油样品进行系统采集后,分析了原油中生物标志化合物,选取Ts/(Ts Tm)、三环萜烷/17α(H)-藿烷和重排甾烷/规则甾烷比值作为油气运移指标,研究了塔河油田原油的运移特征。结果表明,这些指标反映了塔河油田奥陶系原油运移有两个方向,一个是由东向西,另一个是由南向北;9区和三叠系、石炭系原油成熟度较高,说明它们成藏期较晚。  相似文献   

基于热流固耦合的增强型地热有机朗肯循环发电系统性能分析     

王令宝  郭志鹏  卜宪标  李华山  龚宇烈 《地球学报》2023,44(1):211-220

本文建立了耦合井筒、热储、有机朗肯循环发电系统的详细数学模型, 包括三维非稳态热流固耦合模型和有机朗肯循环发电系统热动力学模型, 参考青海省共和县恰卜恰干热岩体地热地质特征, 包括压裂储层、围岩、裂隙、井筒等特征参数, 研究了注入流量、注入温度和井间距对系统净输出功、年均净输出功和热效率的影响规律。结果表明: 在一定的注入流量、注入温度和净间距下, 随着时间的推移, 岩石孔隙压力和热应力作用使得裂隙渗透率增大, 注入泵功耗是降低的, 净输出功和热效率也是降低的。注入流量的增大提高了膨胀机轴功、注入泵功耗和生产温度衰减速率, 进而导致热效率降低, 存在最优的注入流量50 kg/s, 使得年均净输出功达到最大值1 470.1 kW。注入温度的增大可以提高系统热效率, 降低净输出功的年均衰减速率, 当注入温度为60 ℃时, 年均净输出功最大。井间距的增大减缓了生产温度的衰减速率, 有利于热效率的提高, 但是也同时也增大了膨胀机轴功和注入泵功耗。当分支井间距为450 m时, 年均净输出功达到最大值1 497.3 kW。此研究可为增强地热发电系统的开发利用提供指导。  相似文献