Proportioning earthquake‐resistant RC frames in central/eastern U.S.     

JoAnn Browning 《地震工程与结构动力学》2002,31(6):1267-1280

A maximum allowable period criterion is used to determine reasonable stiffness requirements for reinforced concrete frames with the seismicity associated with central and eastern U.S. A general relationship is developed to describe the displacement demand expected for central and eastern U.S. based on a survey of available ground motions, opinions of seismologists, and code‐based provisions. A series of hypothetical reinforced concrete frames is proportioned using a maximum allowable period criterion and evaluated for expected maximum displacement response using non‐linear dynamic analyses and a suite of ground motions. Results indicate that for the reinforced concrete structural systems considered in the study, proportioning for gravity loads will provide sufficient stiffness in central and eastern U.S. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

A non-linear stress-stiffness model for geomaterials at small to intermediate strains     

S. Shibuya 《Geotechnical and Geological Engineering》2002,20(4):333-369

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献   

ISO-834标准火灾作用后钢管混凝土的轴压刚度和抗弯刚度   总被引：4，自引：1，他引：4  

霍静思  韩林海 《地震工程与工程振动》2002,22(5):143-151

火灾后钢管混凝土的轴压刚度和抗弯刚度是钢管混凝土结构变形性能和抗震分析的重要指标，也是火灾后钢管混凝土修复和加固的重要依据之一，本文利用数值方法计算了标准火灾作用后钢管混凝土轴压构件和纯弯构件荷载-变形关系曲线，分析了受火时间、材料强度、含钢率、截面尺寸等因素的影响规律，最后推导了标准火灾作用后钢管混凝土轴压刚度和抗弯刚度的简化计算公式，所得结果可供有关钢管混凝土结构工程设计时参考。  相似文献   

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析     

李慧峰  张玉蓉 《地震研究》2002,25(1)

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架  相似文献   

比奥固结理论在堆载预压加固工程场地中运用   总被引：4，自引：2，他引：4  

徐书平  刘祖德 《岩土力学》2003,24(2):307-310

运用平面应变比奥固结有限单元法，对南京某钢铁厂江边原料厂采用堆载预压结合塑料排水板处理的软土地基进行了计算，得到了较为理想的效果。计算中将塑料排水板合理地简化成等效砂墙，理论计算结果与实测结果吻合较好。验证了计算方法是合理可行的。  相似文献   

煤层底板突水系数计算公式的探讨   总被引：12，自引：1，他引：12  

段水云 《水文地质工程地质》2003,30(1):96-99

根据从诸多濒临带压开采威胁的煤矿中得到大量的第一手资料,运用多元统计分析方法,揭示出了煤层底板突水这种地质现象的演化和特征的内在联系和规律,建立了矿压对煤层底板破坏深度的计算式。通过对以往煤层底板突水系数计算公式进行对比、分析、推理和总结,克服了以往计算公式的不足,继承和发展了公式的优点,得出了考虑因素较全面和较科学的突水系数计算式,从而为解决煤层底板隔水岩柱薄弱地带或断裂陷落柱薄弱地带的煤矿安全生产提供了一套行之有效的解决方法。这套公式在太原西峪煤矿和晋城矿务局(西区)得到了应用,证明是一种行之有效的方法。  相似文献   

空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

Evaluating foundation mass,damping and stiffness by the least‐squares method     

S. H. Ju 《地震工程与结构动力学》2003,32(9):1431-1442

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Interaction between two sliders in a system with rate- and state-dependent friction   总被引：2，自引：0，他引：2  

何昌荣 《中国科学D辑(英文版)》2003,46(Z2)

This study examines slip recurrence patterns in a two-block spring-slider model with rate- and state-dependent friction. Both weak and strong heterogeneities are considered with different settings of coupling stiffness. The results show that the recurrence pattern of slips strongly depends on the degree of coupling between the two blocks. With strong coupling between the two blocks (e.g., kc/ki max >~1), the slip pattern of the system is simple and characterized by periodical stick-slips, with the two blocks slipping together. With strong heterogeneity in friction strength, period-2 motion is found for moderate coupling stiffness (kc/ki max=0.4) between the two blocks. More complicated patterns are found with weak coupling stiffness (kc/ki max=0.2) and strong heterogeneity. With strong heterogeneity, very weak coupling leads to chaotic slip patterns. With coupling stiffness kc=5 ki max and strong heterogeneity, chaotic slip patterns are not found, in contrast with the results by Huang and Turcotte who employed the classical static/kinetic friction law.  相似文献