流体晶、流体晶矿物组合、流体岩及其研究意义     

苏尚国  崔晓亮  罗照华  简东川  侯建光  宁亚格  刘璐璐  张波  刘美玉  蒋俊毅  顾大鹏  霍延安 《地学前缘》2018,25(6):283-289

流体是地球各圈层之间相互作用的纽带,在成岩、成矿过程中起着十分重要的作用。目前,流体的研究主要集中在流体对先存矿物岩石进行的交代作用方面,而对流体直接结晶形成的矿物领域研究较少。文中根据作者近几年的研究成果对从流体直接结晶而成的矿物——流体晶以及流体晶矿物组合、流体岩等的定义、特征进行了归纳总结。最新的研究结果显示：岩浆中可以含有大量的流体,这些流体来源既可以是岩浆演化富集、岩浆与围岩相互作用产生,亦可以是外部来源。因此,流体晶矿物、流体岩在自然界应该是普遍存在的。流体晶矿物的提出将深化人们对地质过程的理解,发展岩石学及矿床学的研究新领域,有利于矿床勘探和成矿预测。  相似文献   

西天山小于赞金矿成矿流体、成矿年代学特征及其地质意义     

于杰  李诺  张博  疏孙平  陈衍景 《地学前缘》2018,25(5):83-95

小于赞金矿床是产于新疆西天山也列莫顿盆地的浅成低温热液型金矿床,赋存于晚古生代大哈拉军山组火山岩中。矿石类型主要为蚀变岩型和石英脉型,主要发育硅化、黄铁绢英岩化、伊利石化、青磐岩化蚀变。流体成矿过程可分为3个阶段,分别为石英黄铁矿、石英玉髓黄铁矿和石英方解石黄铁矿阶段。小于赞金矿床流体包裹体类型单一,主要为水溶液包裹体,可分为纯液相水溶液包裹体(PL类)、富液相水溶液包裹体(L类)和富气相水溶液包裹体(V类)。石英黄铁矿阶段包裹体均一温度集中于130~190 ℃,盐度w(NaCleqv.)为0.2%~8.0%;石英玉髓黄铁矿阶段均一温度介于115~161 ℃,盐度w(NaCleqv.)为0.7%~3.4%;石英方解石黄铁矿阶段均一温度介于110~138 ℃,盐度w(NaCleqv.)为0.2%~3.4%。鉴于赋矿角砾凝灰岩的锆石U-Pb年龄为(353.8±1.8) Ma,且被下石炭统阿恰勒河组不整合覆盖,故可将小于赞金矿床的成矿时代限定在(353.8±1.8) Ma至早石炭世维宪期。锆石εHf(t)变化范围为+4.1~+8.4,平均值+6.1,两阶段Hf模式年龄tDM2变化范围为822~1 095 Ma,指示该区岩浆演化过程中有少量地幔物质的加入。综合考量矿床地质特征、流体包裹体特征和成矿时代,认为小于赞矿床为早石炭世低硫型浅成低温热液型金矿。  相似文献   

天然气水合物区多相流体运移模型：以南海神狐海域为例          下载免费PDF全文

叶鸿  杨涛  朱国荣  蒋少涌 《高校地质学报》2018,24(5):734

天然气水合物是重要的海洋油气资源,近年来利用孔隙水地球化学手段结合流体反应运移模型对水合物进行勘探已 成为研究热点。文章针对南海神狐海域钻探GMGS-1航次的数据资料,用孔隙水溴碘摩尔数比值拟合全新世流体运移速率, 构建了二期次非稳态水合物多相流体运移模型,并以SH7站位作为应用,发现自更新世以来研究区水合物成藏系统处于衰 退状态。通过模型参数敏感性分析,了解到影响模型输出的参数权重从高到低依次是沉积物孔隙度、有机质含量和沉积埋 藏速率。进一步数值分析表明,在水合物成藏系统中,有机质含量与水合物饱和度满足线性相关,其他主要参数与饱和度 的关系并非单调函数,且主导水合物稳定区内的甲烷物源是深部外源流体所携带的甲烷。多相流体运移模型对水合物资源 勘查具有一定的理论意义。  相似文献   

Experimental and numerical study on vortex-induced motions of a deep-draft semi-submersible     

《Applied Ocean Research》2017

An experimental study on vortex-induced motions (VIM) of a deep-draft semi-submersible (DDS) was carried out in a towing tank, with the aim to investigate the VIM effects on the overall hydrodynamics of the structure. In order to study the fluid physics associated with VIM of the DDS, a comprehensive numerical simulation was conducted to examine the characteristics of vortex shedding processes and their interactions due to multiple cylindrical columns. The experimental measurements were obtained for horizontal plane motions including transverse, in-line and yaw motions as well as drag and lift forces on the structure. Spectral analysis was further carried out based on the recorded force time history. These data were subsequently used to validate the numerical model. Detailed numerical results on the vortex flow characteristics revealed that during the “lock-in”, the vortex shedding processes of the upstream columns enhance the vortex shedding processes of the downstream columns leading to the rapid increase of the magnitude of VIM. In addition to the experimental measurements, for the two uniform flow incidences (0° and 45°) investigated, comprehensive numerical data of the parametric study on the VIM characteristics at a wide range of current strength will also serve as quality benchmarks for future study and provide guidance for practical design.  相似文献   

Predicting the effect of biofouling on ship resistance using CFD     

《Applied Ocean Research》2017

This paper proposes a Computational Fluid Dynamics (CFD) based unsteady RANS model which enables the prediction of the effect of marine coatings and biofouling on ship resistance and presents CFD simulations of the roughness effects on the resistance and effective power of the full-scale 3D KRISO Container Ship (KCS) hull.Initially, a roughness function model representing a typical coating and different fouling conditions was developed by using the roughness functions given in the literature. This model then was employed in the wall-function of the CFD software and the effects of a typical as applied coating and different fouling conditions on the frictional resistance of flat plates representing the KCS were predicted for a design speed of 24 knots and a slow steaming speed of 19 knots using the proposed CFD model. The roughness effects of such conditions on the resistance components and effective power of the full-scale 3D KCS model were then predicted at the same speeds. The resulting frictional resistance values of the present study were then compared with each other and with results obtained using the similarity law analysis. The increase in the effective power of the full-scale KCS hull was predicted to be 18.1% for a deteriorated coating or light slime whereas that due to heavy slime was predicted to be 38% at a ship speed of 24 knots. In addition, it was observed that the wave resistance and wave systems are significantly affected by the hull roughness and hence viscosity.  相似文献   

Seismic indicators of focused fluid flow and cross-evaporitic seepage in the Eastern Mediterranean     

《Marine and Petroleum Geology》2017

We present for the first time a synthesis of the evidence of focused fluid flow in the Eastern Mediterranean, providing an updated record that includes recent and past occurrences through the last ca. 6 My of evolution of the basin. We do this by adding the interpretation of a previously unpublished regional 2D seismic dataset to the existing occurrences of focused fluid flow reported in the literature. Our interpretation shows a high number (141) of focused fluid flow features, which span the stratigraphic interval from late Miocene to Recent. Of these features, (82) are at the seabed, and (59) are buried. The previous published record is more difficult to quantify, but in comparison shows an overwhelming majority of seabed features, with only rare examples of buried features.The spectrum of the buried and seabed features covers pockmarks, pipes, mud volcanoes, clastic intrusions and collapse structures. Clustering of the fluid flow features is observed at different times in specific areas, including the Nile Cone, and the Levant, Herodotus, Cyprus and Latakia basins. With the buried record, we are able to highlight the evolution of the leakage points through time. Focused fluid flow venting has been occurring since the onset of the Messinian Salinity Crisis and the start of basinwide deposition of evaporites. We focus in particular on seismic indicators of leakage through evaporites, and of sub-evaporitic source for fluids and remobilised sediments. We also discuss the role of the evaporites as a seal to ascending fluids, and in which circumstances they can be breached.Fluids (and associated remobilised sediments) are sourced from different intervals, from the sub- and supra-evaporitic section, and possibly within the evaporites. Only a minor proportion of the fluid flow features are certainly sourced from below the Messinian evaporites, and most of them are located in the Nile-Levant-Eratosthenes areas. The few examples of pathways that are able to cross thick, undeformed and well preserved evaporites are typically correlated to overpressure release and hydrofracturing. This confirms that the evaporites do act regionally as a very good seal as expected, while fluids are able to cross the evaporites only in their most extreme expression, i.e. in near-lithostathic overpressure conditions. This is confirmed by our observations made in the Eastern Mediterranean, where in the presence of relatively undisturbed evaporites, cross-evaporite vertical fluid pathways are only observed at the high end of the flux-pressure range, and involve sediment remobilisation. Maps combining these different elements can be used to detect areas potentially more prone to breaching.  相似文献   

Evaluating the relationship between spatial heterogeneity and temporal variability of larval fish assemblages in a coastal marine ecosystem (Haizhou Bay,China)   总被引：1，自引：0，他引：1       下载免费PDF全文

Zengguang Li  Zhenjiang Ye  Rong Wan  Yong Chen  Yongjun Tian  Yiping Ren  Hong Liu  Haisheng Hu  Robert Boenish 《Marine Ecology》2017,38(6)

In coastal marine ecosystems, spatial patterns of larval fish assemblages (LFAs) tend to exhibit geographic stability because of relatively stable spawning site selection and predictable oceanographic phenomena such as eddies. To evaluate the relationship between spatial heterogeneity and temporal variability of LFAs, we conducted a high spatiotemporal resolution ichthyoplankton survey from April to July in 2013 in the shallow waters (<20 m) of Haizhou Bay, China. Our analysis indicated three distinct assemblages, which were stable geographically but exhibited a gradual and directional change of species composition and abundance over our study period. Sea surface temperature was the most important environmental co‐variate for determining temporal variability of LFAs, likely owing to temperature effects of species composition and spawning period selection of adult fish, along with known temperature‐dependent survival rates of larval fish. Study of LFA spatiotemporal dynamics is essential for improved understanding of adult fish spawning behavior, and has potential to inform design and implementation of conservation and management measures (e.g. marine protected areas) in coastal systems.  相似文献   

Seafloor and buried mounds on the western slope of the Niger Delta     

《Marine and Petroleum Geology》2017

Seafloor mounds are potential geohazards to offshore rig emplacement and drilling operations and may contain evidence of underlying petroleum systems. Therefore, identifying and mapping them is crucial in de-risking exploration and production activities in offshore domains.A 738 km² high resolution three-dimensional seismic dataset was used to investigate the occurrence, seismic characteristics and distribution of features interpreted as seafloor and buried sediment mounds, at water-depths of 800–1600 m, on the western Niger Delta slope. Fifteen seafloor mounds and eighteen shallowly buried mounds were identified. The seafloor mounds are characterised by lower seismic amplitude anomalies than the surrounding seabed sediments, and overlie vertical zones of acoustic blanking. The buried mounds in contrast are characterised by high amplitude anomalies; they also directly overlie sub-vertical zones of acoustic blanking. Seismic evidences from the features, their distribution patterns and tectono-stratigraphic associations suggest that their formation was controlled by the juxtaposition of buried channels and structural highs and their formation caused by focused fluid flow and expulsion of entrained sediments at the seabed.Considering the acoustic and geometrical characteristics of the mounds and comparing them with mound-shaped features from around the world, we conclude that the mounds most likely comprise heterolithic seafloor extrusions of muds and sands from the Agbada Formation with gas and possibly oil in some of the pore space giving rise to the acoustic characteristics.  相似文献   

冲绳海槽热液柱动力过程的数值模拟     

岑显荣  郭双喜  鲁远征  屈玲  周生启 《海洋与湖沼》2017,48(6):1435-1445

本文以冲绳海槽伊平屋北部热液区(126o53.80′,27o45.50′)的现场水文数据作为背景条件,使用k-ε湍流模型模拟热液柱的动力过程。模拟计算得到的羽流速度、温度和湍流耗散率等基本物理量展现了热液柱的时空演化过程。模拟结果显示,羽流最大上升高度及中性浮力面高度与海底的距离分别为83.62m和68.97m,和2014年先导专项在此附近热液区所观测的温度异常和盐度异常的深度位置(离海底约66—86m)接近。羽流的上升速度满足高斯分布,其半径b与距喷口高度z-H成正比:b=0.0985(z-H),其中z为距海底高度,H为热液烟囱体的高度。羽流的最大体积通量比喷口的初始值增加了878倍,达1.034m~3/s;在中性浮力面位置附近,动量通量达到最大值,为0.156m~4/s~2,比初始值增加了882倍;浮力通量在中性浮力面以下和BM2000(Bloomfield et al,2000)理论模型符合良好,在中性浮力面以上则呈现随高度先增加后减小的特征。本文计算得到的平均卷挟率为α≈0.0807,与背景流较弱的热液区的声学现场观测结果相符。  相似文献   

楔形体在波浪中自由入水的数值模拟   总被引：1，自引：0，他引：1  

王平  袁帅  张宁川  陈伟斌  陈元 《海洋工程》2017,35(5):42-50

物体入水时波浪的影响不可忽略,基于流体力学模型采用VOF法,并利用自定义函数,模拟了楔形体的自由入水过程;同时结合推波板原理及海绵层消波理论实现了数值水槽的造消波,完成了波浪中楔形体自由入水的模拟,计算了楔形体入水时所受的水作用力、自由液面变化及物面压强分布等,研究了不同波高、周期以及在波浪不同位置入水时对楔形体的影响。结果表明:本文建立的数值模型可很好地模拟楔形体入水造成的射流及空泡的形成发展过程,波浪对楔形体入水的影响主要由波浪内部流场变化及表面波形决定,在波浪不同位置处入水对楔形体受力及入水形态均有较大影响。  相似文献