软土地基某泵闸深基坑支护失稳分析及处理     

林立祥  臧光文  和再良 《岩土工程技术》2010,24(6):294-298

介绍了某泵闸基坑灌注桩围护位移及钢管支撑受力过程,对造成支护失稳原因进行了详细分析,探讨基坑设计及施工工艺存在的问题,介绍了支护失稳后抢险、围护补强、防渗加固及支撑体系补强等措施,同时对加固补强处置效果进行了分析,得出相关结论及建议,为类似基坑顺利施工提供了一定依据。  相似文献   

番禺地区病险水库地质特点及加固对策     

王启国  杨汉良 《岩土工程技术》2010,24(6):315-319

广州市番禺区目前尚在发挥效益的水库有15座,其中12座水库存在病害隐患,急需除险加固。基于工程地质勘察与评估工作,查明了辖区病险库的地质特点：坝身质量较差、坝基存在渗漏及渗透破坏问题、软基沉降变形和饱和砂土地震液化问题等,探讨了整险加固的工程措施,如加高加固大坝、防渗处理、抗地震液化加固等。结果为辖区病险水库整治提供技术支持,对国内类似水利工程整险加固有较好的参考价值。  相似文献   

软土地基中基坑渗透破坏机理和对策   总被引：1，自引：1，他引：0  

孙瑞瑞 《上海国土资源》2010,31(Z1)

软土地基中基坑渗流诱发的土体破坏是引起基坑工程事故的一个重要因素。针对基坑工程渗流问题的特殊性,探讨了基坑渗透破坏的机理。结合基坑工程典型工况,阐述了进行渗流控制研究的重要意义,讨论了渗流控制的关键问题,对于深基坑的工程施工具有重要的指导意义。  相似文献   

新型半潜式海上风力机基础水动力特性研究     

魏东泽  阙小玲  付图南  周阳  杜珈宇  王金涛 《海洋工程》2022,40(1):82-92

概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大.  相似文献   

明基床上开孔沉箱垂直力峰值对应的水平力分析          下载免费PDF全文

孙大鹏  张玉彬  夏志盛  吴浩 《海洋工程》2014,32(6):49-58

利用水槽二维物理模型对规则波及不规则波作用下明基床上开孔沉箱所受到的波浪力进行了较为系统的试验研究。分析了开孔沉箱总垂直力峰值时刻对应的总水平力与相对基床高度、消浪室相对宽度、波陡、相对水深以及开孔率等影响因素之间的关系,给出了明基床上开孔沉箱总水平力比值(总垂直力峰值时刻对应的总水平力/总水平力峰值)与各影响因素之间的计算关系式。研究成果可供实际工程参考应用。  相似文献   

大型储油罐基础非均匀沉降的有限元分析研究     

刘红军  杨志强  王秀海 《中国海洋大学学报(自然科学版)》2014,44(5):89-94

以中石化仪征15万m3大型浮顶储油罐工程为例,研究了砂石褥垫层对大型储油罐基础的差异沉降的影响。根据行业标准《建筑地基处理技术规范》(JGJ79—2012)沉降公式计算以及有限元模拟计算,并结合现场实测数据,验证了有限元模拟分析的可行性,在此基础上进行了环墙内砂石垫层厚度及长度对差异沉降影响的扩展研究,为以后的类似工程项目设计施工提供了借鉴。  相似文献   

Study on deformation law of circular foundation under combined loading     

ZHANG Qiyi  and SHI Hongda 《中国海洋大学学报(英文版)》2014,13(1):51-56

The foundations of some ocean engineering structures are built to withstand not only the vertical gravity load V, but also the horizontal load H induced by sea waves and current. The horizontal load includes the concentrated force load, the moment load M, and the torque load T termed also as combined loading. It is of academic and engineering significance to study the deformation law of submarine seabed due to combined loading. On the basis of the three-dimensional elastic mechanics solution of circular foundation, numerical methods are used to analyze the deformation law of submarine soil under circular foundation with six degrees of freedom. The finite element analysis results give the elastic deformation law of soil in three dimensional spaces, modify the theoretical elasticity solution, and presents nonlinear soil deformation mechanism under the circular foundation with six degrees of freedom.  相似文献   

分段多项式拟合在动三轴试验数据处理中的应用     

周松望  周杨锐  吴海京  戴少军  沈志明  董明明 《海洋学报》2014,36(5):186-189

动三轴采集的试验数据点(剪应变与动剪模量和阻尼比之间)具有离散性和有限性,为方便应用需要对数据点进行拟合,但现有经验公式不一定很好吻合试验数据。为得到不同剪应变与对应的动剪模量和阻尼比之间的关系,本文利用最小二乘原理,对渤海某海洋平台地基土进行动三轴试验获得的动剪模量、阻尼比与剪切应变的数据进行了分段多项式的拟合。数据处理过程是先对剪应变值进行了压缩处理,然后再分段低次多项式拟合,得到多项式拟合参数。通过此项改进解决了正规方程解中的病态问题,且拟合效果良好。  相似文献   

Numerical analysis and centrifuge modeling of shallow foundations   总被引：1，自引：0，他引：1  

罗强  栾茂田  杨蕴明  王忠涛  赵守正 《中国海洋工程》2014,28(2):163-180

The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen.  相似文献   

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil     

Hamed Niroumand  Khairul Anuar Kassim 《中国海洋工程》2014,28(1):115-126

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.  相似文献