人工砾石海滩变化及输移率研究   总被引：1，自引：0，他引：1  

于跃  蔡锋  张挺  戚洪帅  刘建辉 《海洋工程》2017,35(5):79-87

在我国采用砾石海滩在某些强动力区域进行海滩养护是一种新的尝试,具有很好的适用性。以厦门天泉湾人工砾石滩为研究对象,对2015年至2016年间10条海滩剖面开展了5次周期性监测,通过综合分析,得出在人工砾石滩竣工完成后的一年时间内,滩肩外沿线、岸线及滩面底角的砂砾分界线大幅度后退,滩肩宽度变窄;滩肩外沿线明显隆起,形成滩肩脊线;滩面坡度变大,且上游侧海滩的滩面普遍比下游侧海滩的滩面陡,一年后,岸滩整体变化趋于稳定。针对砾石滩不断向西南方向运移的现状,采用Leo C.van Rijn输移率公式计算砾石滩年平均输移率,并通过测量断面法、体积变化量法对Leo C.van Rijn公式计算结果进行验证,得出砾石滩年平均输移率的范围约为1 015.66~2 392.5 m~3/a。  相似文献   

新型贴井壁式阵列方位侧向测井数值模拟与响应特性          下载免费PDF全文

高建申  孙建孟  于其蛟  崔利凯  姜艳娇 《地球物理学报》2016,59(3):1131-1142

在现有侧向测井仪器基础上,提出了一种新型贴井壁式阵列方位侧向测井电极系,该仪器能提供径向和周向方位电阻率测量.该电极系采用贴井壁测量方式,提供5种径向探测深度.利用三维有限元方法模拟了阵列方位侧向测井电极系的井眼影响特性、径向探测特性、纵向分层能力、方位分辨能力,并模拟其对井周地层、水平井非对称泥浆侵入和倾斜地层的响应.在导电泥浆中最大探测深度为1.23m,纵向分辨率为0.3m,可以识别出0.1m薄层,方位分辨率为20°.贴井壁测量时,纵向分辨率不受泥浆和围岩电阻率的影响,能够准确测量井周方位电阻率,较不贴井壁测量具有很大优势,同时利用12条方位电阻率曲线能够反映出水平井泥浆非对称侵入特性,倾斜地层倾角和倾斜方向.  相似文献   

深埋沉管隧道基础碎石垫层变形特性试验研究     

王勇 《岩土力学》2015,36(12):3387-3392

沉管隧道基础往往采用条带垄沟状先铺碎石垫层,该碎石垫层作为桩基与沉管结构传力构造的工程经验极少,为了解碎石垫层在工程荷载下的变形特性、传力机制及垄沟尺寸,及结构水平移动、回淤、垄沟偏位、桩顶倾斜等工程因素对其的影响等方面进行了物理模型试验研究。研究表明：（1）碎石级配的选择应同时考虑压缩模量、孔隙率、粒径等多种因素,过小粒径级配不适宜用于基础垫层;（2）垄沟的存在会大幅降低碎石垫层的压缩模量,压缩主要是由压密变形和垄沟导致的碎石颗粒侧向“挤出”造成;（3）支撑桩段碎石垫层的极限承载能力约为480 kPa,碎石垫层作为桩顶传力构造,受力变形机制复杂,个别影响因子十分敏感,需采取措施控制桩顶应力水平在碎石垫层极限承载能力范围内。  相似文献   

围堰防渗墙与复合土工膜联接型式试验研究     

刘军  李波 《岩土力学》2015,36(Z1):531-536

防渗墙上接土工膜是围堰常用的防渗体系,两者变形是否协调是决定防渗成败的关键。以某围堰工程为例,通过围堰防渗体系中复合土工膜的受力分析和复合土工膜与砂砾料界面的直剪摩擦试验,研究了土工膜与填料之间的相互作用,提出了保证土工膜不被拉断应满足的条件。另外,通过离心模型试验监测复合土工膜在堰体与防渗墙变形过程中的应变,揭示了复合土工膜的受力性状和联接部位的破坏机制。结果表明,在一定上覆荷载作用下复合土工膜与堰体之间的摩阻力超过其所承受的拉伸力,导致预留伸缩节不能发挥作用;复合土工膜下部风化砂的固结变形使之与刚性防渗墙之间产生较大的差异沉降以及防渗墙与上游堰体的水平脱离,两种变形不协调均可导致与防渗墙联接部位的土工膜因受拉而破坏,在该基础上提出了改进的土工膜与防渗墙的联接型式和铺设方法。试验成果为指导围堰防渗体系的分析和设计提供了可靠的依据。  相似文献   

Sensitivity of interfacial hydraulics to the microtopographic roughness of water‐lain gravels          下载免费PDF全文

Stephen P. Rice  Thomas Buffin‐Bélanger  Ian Reid 《地球表面变化过程与地形》2014,39(2):184-199

Flow within the interfacial layer of gravel‐bed rivers is poorly understood, but this zone is important because the hydraulics here transport sediment, generate flow structures and interact with benthic organisms. We hypothesized that different gravel‐bed microtopographies generate measurable differences in hydraulic characteristics within the interfacial layer. This was tested using a high density of spatially and vertically distributed, velocity time series measured in the interfacial layers above three surfaces of contrasting microtopography. These surfaces had natural water‐worked textures, captured in the field using a casting procedure. Analysis was repeated for three discharges, with Reynolds numbers between 165000 and 287000, to evaluate whether discharge affected the impact of microtopography on interfacial flows. Relative submergence varied over a small range (3.5 to 8.1) characteristic of upland gravel‐bed rivers. Between‐surface differences in the median and variance of several time‐averaged and turbulent flow parameters were tested using non‐parametric statistics. Across all discharges, microtopographic differences did not affect spatially averaged (median) values of streamwise velocity, but were associated with significant differences in its spatial variance, and did affect spatially averaged (median) turbulent kinetic energy. Sweep and ejection events dominated the interfacial region above all surfaces at all flows, but there was a microtopographic effect, with Q2 and Q4 events less dominant and structures less persistent above the surface with the widest relief distribution, especially at the highest Reynolds number flow. Results are broadly consistent with earlier work, although this analysis is unique because of the focus on interfacial hydraulics, spatially averaged ‘patch scale’ metrics and a statistical approach to data analysis. An important implication is that observable differences in microtopography do not necessarily produce differences in interfacial hydraulics. An important observation is that appropriate roughness parameterizations for gravel‐bed rivers remain elusive, partly because the relative contributions to flow resistance of different aspects of bed microtopography are poorly constrained. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.  相似文献   

Impact of channel bar form and grain size variability on estimated stranding risk of juvenile brown trout during hydropeaking          下载免费PDF全文

Christoph Hauer  Günther Unfer  Patrick Holzapfel  Marlene Haimann  Helmut Habersack 《地球表面变化过程与地形》2014,39(12):1622-1641

Hydropeaking leads to artificial fluctuations in discharge and corresponding water levels with pronounced dewatering areas between base and peak flow along gravel bars and channel banks. In the present study, 16 hydropeaking reaches in Austria were investigated to assess possible differences in the estimated stranding risk for young of the year brown trout according to different gravel bar types and differences in microtopography roughness. Based on hydrodynamic‐numerical modelling, a predictive habitat modelling approach was implemented in the study design. Accompanied by grain size sampling along the various channel bars, a conceptual stranding risk model (SRM) was developed. The results showed that a high variability in estimated stranding risk exists for the tested sites considering discharge ratios of 1:3, 1:5 and 1:10. With respect to the discussion of establishing legal thresholds for ramping ratios in discharge, it was documented that, exemplarily, a discharge ratio base flow/peak flow of 1:5 (winter base flow conditions) could cause minor differences in the spatial extent of dewatering areas and the related estimated stranding risk for juvenile brown trout compared to a ratio of 1:2 for summer base flow conditions. Microtopographic roughness was addressed due to sampling and analysis of grain size distributions. Statistical testing of grain size distributions revealed significant differences between the surface material compositions of the investigated gravel bars. Those differences are evident, particularly for the coarser fraction (d₉₀), which is important as cover for young of the year brown trout. These aspects of grain size in habitat use and hydraulics have been addressed in the conceptual SRM. The results showed that point bar morphology, in particular, was less sensitive to the risk of stranding compared to, for example, alternating gravel bars. Considering the multiple pressures for alpine rivers, the improvement of structural features due to bar formation and related self‐forming processes is discussed as a possible alternative for future mitigation measures to reduce the negative impacts of hydropeaking. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

基于指示和普通克里金的不连续地层厚度估计方法     

李晓军  张振远 《岩土力学》2014,35(10):2881-2887

因为克里金插值方法考虑了样本的空间统计特征而被广泛应用于地层建模。但对于地层尖灭、缺失等不连续地层情况,常用的克里金方法（如普通克里金方法）通常给出较为平滑的地层厚度估计结果,在地层分布边缘的局部范围内与实际情况相差较大。针对不连续地层,提出一种采用指示克里金和普通克里金相结合的地层厚度估计方法。该方法首先采用指示克里金方法估计地层分布范围,然后采用普通克里金方法估计分布范围内的地层厚度,并根据估计标准差来评价地层厚度的不确定性。将提出的方法应用于上海长江隧道的地层建模,通过交叉验证,证明了该方法在地层分布边缘的局部范围内能明显改善地厚度估计结果,标准差降低了15%～18%,得到了比普通克里金和线性插值方法更接近真实情况的地层厚度估计值。  相似文献   

泥浆在地层中的渗透特性试验研究   总被引：1，自引：0，他引：1  

闵凡路  魏代伟  姜腾  张春雷 《岩土力学》2014,35(10):2801-2806

保持开挖孔（槽）的稳定性是泥浆在地下连续墙、钻孔灌注桩及泥水盾构工法等工程中最重要的作用,是通过泥浆在地层表面形成泥皮,使得泥浆压力平衡地层的土水压力实现的。其中,泥皮的形成是泥浆在地层中的渗透问题。为了探讨泥浆在地层中的渗透规律,采用多组性质不同的泥浆在多种渗透性不同的地层中开展泥浆在地层中的渗透试验,系统地展示了泥浆在地层中不同的渗透现象。渗透完成后泥浆颗粒在地层表面的堆积形态可以分为：泥皮型、泥皮+渗透带型、无泥皮或渗透带3种类型,并且泥浆在地层中的渗透曲线的类型与泥浆颗粒在地层表面的堆积形态的类型有一定的对应关系。泥浆在地层中的渗透试验过程中渗透流量的大小,不仅可以反映泥浆的渗透类型,还可以作为判断是否形成泥皮的标准。  相似文献   

上软下硬地层浅埋大跨度车站拆撑安全性分析     

刘涛  赵松壮  孙付峰 《岩土力学》2014,35(Z1):306-310

对于复合式衬砌隧道,初支受力最危险的时期就是为保证二次衬砌的完整性而分段拆除临时支撑的阶段。依托青岛地铁某暗挖车站,采用现场实测数据分析和数值模拟相结合的方法,对比拆撑前后围岩与初支变形情况,进而对6 m范围内交替拆撑,并以6 m为工作单元间隔拆撑的拆撑方案安全性进行分析。实测数据表明,地表沉降、拱顶沉降及净空收敛在拆撑前后增长量及影响均较小,数值计算结果与实测数据吻合较好,可知初支的安全性受支撑拆除的影响较小。研究结论为实现信息化施工提供了依据,也为今后类似工程积累了相关经验。  相似文献   

雅安地区青衣江流域第四纪阶地特征分析   总被引：5，自引：0，他引：5  

唐熊  陶晓风 《沉积学报》2009,27(1):137-141

雅安青衣江流域阶地非常发育。通过砾石的岩性、粒度、扁平面的统计,研究区阶地砾石主要来源于青衣江上游地区,在万古场古青衣江流向由北东改为向东,在阳坪现代青衣江流向一致为东南,流速有逐渐减小的趋势。根据阶地测年和阶面相对高程分析,从早更新世至全新世本区至少有7次构造抬升,万古场阶地最大抬升幅度达85 m,最大抬升速率为0.532 mm/a,阳坪阶地抬升幅度最大达到52 m,最大抬升速率为1.25 mm/a。  相似文献