探地雷达检测道路厚度结构的应用现状及进展   总被引：19，自引：5，他引：19  

杨天春  吕绍林  王齐仁 《物探与化探》2003,27(1):79-82

对探地雷达检测道路厚度结构的应用现状进行介绍,分析雷达检测道路厚度结构的物理前提.将探地雷达的道路厚度检测技术与常规的钻孔取芯方法进行对比,并根据笔者在工作中应用的实际情况,说明探地雷达在公路厚度结构检测方面有广阔应用前景.  相似文献   

现代抗震设计理论的发展过程   总被引：18，自引：0，他引：18  

谢礼立  马玉宏 《国际地震动态》2003,(10):1-8

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。  相似文献   

医院住院部大楼抗震性能评价   总被引：1，自引：0，他引：1  

王国新  李宏男  肖诗云  张璟玮 《世界地震工程》2003,19(2):102-107

以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。  相似文献   

最不利地震动在网壳结构抗震设计中的应用   总被引：3，自引：0，他引：3  

范峰  钱宏亮  谢礼立 《世界地震工程》2003,19(3):17-21

利用文献提供的最不利地震动，对网壳结构等大跨空间结构进行了分析，分别考察了仅水平输入和三向地震波输入的两种情况，对最不利地震动在网壳结构抗震设计中的适用性进行了探讨，并在一实际工程设计中进行了应用。大跨度空间结构在水平地震动输入时，宜按照的最不利地震动进行设计；在三向地震动同时输入时，应同时分别按所推荐最不利设计地震动和按常规选用的地震动，对大跨度空间结构进行抗震分析。  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters     

Chunxiang Li  Yanxia Liu 《地震工程与结构动力学》2003,32(5):671-690

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

青藏铁路管道通风试验路基地温变化及热状况分析   总被引：3，自引：6，他引：3  

牛富俊  俞祁浩  赖远明 《冰川冻土》2003,25(6):614-620

基于青藏铁路北麓河试验段管道通风路基在2个冻融循环周期内的地温监测资料，分析了路基温度的发展、温度场分布特征及多年冻土的热流量变化．结果表明：通风管埋设于路堤中部的路基温度变化和发展情况与一般路基类似，路基在施工后的2个冻融周期内仍处于整体升温的过程；通风管埋设于路堤下部的路基，虽然前2个冻融循环周期内土体温度与原始状态相比同样有所升高，但开始出现逐渐降低的趋势，同时地温场的分布在横向上的对称性也比较好，在热交换方面，一般填土路基和通风管位于路堤中部的路基在施工后的前2个冻融循环周期内一直处于吸热过程，而通风管位于路堤下部的路基在经历了第1个周期的持续吸热过程后，在第2个冻融循环周期内已经开始放热。  相似文献   

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys     

S. A. Gil-Zepeda  J. C. Montalvo-Arrieta  R. Vai  F. J. Snchez-Sesma 《Soil Dynamics and Earthquake Engineering》2003,23(1):77-86

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.  相似文献   

Classification of artificial (man-made) ground   总被引：1，自引：0，他引：1  

M. S. Rosenbaum  A. A. McMillan  J. H. Powell  A. H. Cooper  M. G. Culshaw  K. J. Northmore 《Engineering Geology》2003,69(3-4):399-409

The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding.  相似文献   

Reliability based risk index for the design of reinforced earth structures   总被引：1，自引：0，他引：1  

Adnan A. Basma  Samer A. Barakat  Maher T. Omar 《Geotechnical and Geological Engineering》2003,21(3):225-242

The design methods currently used for earth reinforcement are mostly based on deterministic properties of both the soil and the construction materials used. Nowadays, however, the general trend is designing at a specific degree of reliability. This is even more true where the raw data such as soil properties exhibit significant variation. Deterministic solutions, in this case, may not suffice. Therefore, this paper will attempt to use probabilistic formulations thereby modifying the existing design procedure of reinforced earth retaining walls to account for uncertainties and variabilities. Through a first order Taylor's series expansion about the mean, the mean and variance of the strip reinforcing components, namely width and length, are derived in terms of the variations in the soil properties. Design charts that enable estimation of both mean and variance are developed to avoid extensive partial differentiation involved in the computations. Using appropriate probability distributions along with the mean and variance, the final design outputs are determined for a selected failure probability by introducing what is refered to as 'risk index'. The results indicate that the risk index increases with an increase in the coefficient of variations and a decrease in failure probability. Furthermore, it is shown that in some cases, depending on the variabilities of the soil properties, the classical design technique produced a relatively high failure probability. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献