激光拉曼光谱法分析多种显微组分荧光变化及其应用   总被引：1，自引：1，他引：0  

李志明  施伟军  SHERWOOD Neil  刘文斌  蒋宏 《岩矿测试》2008,27(5):341-345

利用激发488 nm激光的氩离子激光器作为RENISHAW inVia型激光拉曼光谱仪的光源,建立了多种显微组分荧光变化(FAMM)分析方法,并对镜质体反射率明显抑制的东营凹陷有效烃源岩进行了测定。结果表明,东营凹陷有效烃源岩的有机质类型越好,镜质体反射率抑制程度越高,有效烃源岩的真实成熟度应主要处于0.64%~1.30%,而不是实测镜质体反射率所反映的0.37%~1.10%。  相似文献   

青海南部熔积岩的发现:对寻找VMS型矿床的重要启示     

杨志明  侯增谦  Noel C White  杨开辉  宋玉财  王召林 《矿床地质》2008,27(3)

熔积岩指的是侵入、混合到未固结或弱固结的湿沉积物中的熔浆分解、原位形成的一类特殊岩石。正确地认识该类岩石,有利于增进人们对岩浆-水(沉积物)相互作用过程的理解,恢复古环境。在青海南部沱沱河地区发现了一套角砾为撕片状、锯齿状及浑圆状的安山岩,胶结物为铁硅质组合的特殊熔积岩。研究表明,该熔积岩的角砾为岩浆遇水后快速淬火、裂解的产物,铁硅质组合为海底喷气沉积形成的含铁建造;且安山岩与含铁建造发生混合时,含铁建造尚未固结。该套熔积岩的发现,改变了长期以来对开心岭铁矿为火山热液交代安山岩而形成的认识,对于在矿区寻找VMS型矿床、区域内寻找海底热水喷流沉积型矿床具有重要的启示意义。  相似文献   

赣南崇义—大余—上犹矿集区不同类型含矿石英中白云母40Ar/39Ar年龄及其地质意义   总被引：14，自引：0，他引：14  

刘善宝  王登红  陈毓川  李建康  应立娟  许建祥  曾载淋 《地质学报》2008,82(7):932-2008-01-30

崇义—大余—上犹矿集区是世界著名的黑钨矿床集中区,本文选择钨锡多金属硫化物石英脉型（柯树岭和漂塘矿床）和锡钨石英脉型（仙鹅塘矿床）3个矿床石英中的白云母开展40Ar/39Ar年代学研究,测得坪年龄分别是：钨锡多金属硫化物石英脉型是 158.9 ± 1.4 Ma（漂塘）、158.8 ± 1.2 Ma（柯树岭）;钨锡石英脉型的是231.4 ± 2.4 Ma（仙鹅塘）,在反等时线图上,其对应的截距年龄分别是158.8 ± 1.6 Ma、158.7 ± 1.9Ma和232.5 ± 2.4 Ma。由此表明,在崇余犹矿集区内存在两个不同成矿时期,即以黑钨矿为主的多金属硫化物石英脉型矿床形成于中侏罗世,集中于160~150Ma之间,与南岭地区钨锡矿床的主成矿期是一致的;而以锡石为主的,并含有大量白钨矿的石英脉型矿床可形成于印支期  相似文献   

赣南淘锡坑钨多金属矿床花岗岩和云英岩岩石特征及云英岩中白云母40Ar/39Ar定年     

guochunli 《地质学报》2008,82(1):1274-1284

赣南崇义县淘锡坑钨矿位于南岭东西向构造带东段,属于以黑钨矿石英脉型为主的钨多金属矿床。矿床形成与燕山期中酸性岩浆作用有密切关系,石英矿脉受一组北西向断裂控制,穿切新元古界。本文在淘锡坑钨矿区3个揭露到花岗岩体顶部的中段（206、106、56中段）采集到岩体顶部云英岩样品,利用40Ar/39Ar同位素定年测得云英岩中的白云母的坪年龄分别为152.7 ± 1.5 Ma（206中段）,153.4 ± 1.3 Ma（106中段）,155.0 ± 1.4 Ma（56中段）。与前人用其他方法测定的花岗岩成岩和成矿年龄几乎一致。花岗岩和云英岩全岩稀土元素均具有M型四分组效应和强烈的Eu亏损特征,反映出花岗质岩浆经历了高度分异演化及其岩体结晶晚期流体/熔体相互作用。综合前人在南岭地区同类矿床的研究资料,可知南岭地区160～150Ma成岩成矿作用主要分布于南岭中-东段,可能为大陆边缘弧后岩石圈伸展的构造动力学背景的产物。  相似文献   

高、低煤阶煤层气藏地质特征及控气作用差异性研究   总被引：4，自引：0，他引：4  

王勃  巢海燕  郑贵强  李景明  郭志斌  王红岩  刘洪林  李贵中 《地质学报》2008,82(10):1396-1401

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。  相似文献   

四川汶川MS 8.0大地震地表破裂带的遥感影像解析   总被引：21，自引：1，他引：20  

付碧宏  时丕龙  张之武 《地质学报》2008,82(12):1679-1687

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川MS 8.0级大地震造成巨大的人员伤亡和财产损失,并形成了空间上基本连续分布的地表破裂带（地震断层）。根据地表破裂带的解译标志及影像特征,我们充分利用震后中国科学院航空遥感飞机所获取的高分辨率航空遥感图像以及我国台湾福卫-2卫星遥感图像进行详细解译分析,并结合震后的多次野外科学考察与验证,初步查明了四川汶川MS 8.0级大地震所产生地表破裂带的空间分布特征。遥感解译分析表明汶川大地震产生的地表破裂带总计长约300 km,其几何学特征十分复杂,主要沿先存的NE走向活动断裂带呈不连续展布;变形特征以逆冲挤压为主兼具右旋走滑分量。按同震地表破裂带所在断裂带位置,可将其分为两条： 中央地表破裂带：沿映秀-北川断裂带分布,从西南开始呈北东向延伸至平武县水观乡石坎子北东一带,长约230 km,最大垂直位移量达6.0 m左右,最大右旋水平位移达5.8 m;山前地表破裂带：沿灌县-安县断裂带分布,由都江堰市向峨乡一带开始呈北东向延伸至安县雎水镇一带,长约70 km,以逆冲挤压为主,最大垂直位移量可达2.5 m。此外,遥感图像分析还表明上述地表破裂带与地质灾害分布在空间上具有十分密切的相关性,因此,挤压逆冲-走滑型地震断层的致灾效应研究是未来应该加以重视的研究课题。  相似文献   

汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系   总被引：12，自引：2，他引：10  

付小方  侯立玮  李海兵  王宗秀  邹付戈 《地质学报》2008,82(12):1733-1746

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。  相似文献   

History of crustal growth and recycling at the Pacific convergent margin of South America at latitudes 29°–36° S revealed by a U–Pb and Lu–Hf isotope study of detrital zircon from late Paleozoic accretionary systems     

A.P. Willner  A. Gerdes  H.-J. Massonne 《Chemical Geology》2008,253(3-4):114-129

Detrital zircon provides a powerful archive of continental growth and recycling processes. We have tested this by a combined laser ablation ICP-MS U–Pb and Lu–Hf analysis of homogeneous growth domains in detrital zircon from late Paleozoic coastal accretionary systems in central Chile and the collisional Guarguaráz Complex in W Argentina. Because detritus from a large part of W Gondwana is present here, the data delineate the crustal evolution of southern South America at its Paleopacific margin, consistent with known data in the source regions.Zircon in the Guarguaráz Complex mainly displays an U–Pb age cluster at 0.93–1.46 Ga, similar to zircon in sediments of the adjacent allochthonous Cuyania Terrane. By contrast, zircon from the coastal accretionary systems shows a mixed provenance: Age clusters at 363–722 Ma are typical for zircon grown during the Braziliano, Pampean, Famatinian and post-Famatinian orogenic episodes east of Cuyania. An age spectrum at 1.00–1.39 Ga is interpreted as a mixture of zircon from Cuyania and several sources further east. Minor age clusters between 1.46 and 3.20 Ga suggest recycling of material from cratons within W Gondwana.The youngest age cluster (294–346 Ma) in the coastal accretionary prisms reflects a so far unknown local magmatic event, also represented by rhyolite and leucogranite pebbles. It sets time marks for the accretion history: Maximum depositional ages of most accreted metasediments are Middle to Upper Carboniferous. A change of the accretion mode occurred before 308 Ma, when also a concomitant retrowedge basin formed.Initial Hf-isotope compositions reveal at least three juvenile crust-forming periods in southern South America characterised by three major periods of juvenile magma production at 2.7–3.4 Ga, 1.9–2.3 Ga and 0.8–1.5 Ga. The ¹⁷⁶Hf/¹⁷⁷Hf of Mesoproterozoic zircon from the coastal accretionary systems is consistent with extensive crustal recycling and addition of some juvenile, mantle-derived magma, while that of zircon from the Guarguaráz Complex has a largely juvenile crustal signature. Zircon with Pampean, Famatinian and Braziliano ages (< 660 Ma) originated from recycled crust of variable age, which is, however, mainly Mesoproterozoic. By contrast, the Carboniferous magmatic event shows less variable and more radiogenic ¹⁷⁶Hf/¹⁷⁷Hf, pointing to a mean early Neoproterozoic crustal residence. This zircon is unlikely to have crystallized from melts of metasediments of the accretionary systems, but probably derived from a more juvenile crust in their backstop system.  相似文献   

Sulfur isotope measurement of sulfate and sulfide by high-resolution MC-ICP-MS   总被引：4，自引：0，他引：4  

Paul R. Craddock  Olivier J. Rouxel  Lary A. Ball  Wolfgang Bach   《Chemical Geology》2008,253(3-4):102-113

We have developed a technique for the accurate and precise determination of ³⁴S/³²S isotope ratios (δ³⁴S) in sulfur-bearing minerals using solution and laser ablation multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). We have examined and determined rigorous corrections for analytical difficulties such as instrumental mass bias, unresolved isobaric interferences, blanks, and laser ablation- and matrix-induced isotopic fractionation. Use of high resolution sector-field mass spectrometry removes major isobaric interferences from O₂⁺. Standard-sample bracketing is used to correct for the instrumental mass bias of unknown samples. Background on sulfur masses arising from memory effects and residual oxygen-tailing are typically minor (< 0.2‰, within analytical error), and are mathematically removed by on-peak zero subtraction and by bracketing of samples with standards determined at the same signal intensity (within 20%). Matrix effects are significant (up to 0.7‰) for matrix compositions relevant to many natural sulfur-bearing minerals. For solution analysis, sulfur isotope compositions are best determined using purified (matrix-clean) sulfur standards and sample solutions using the chemical purification protocol we present. For in situ analysis, where the complex matrix cannot be removed prior to analysis, appropriately matrix-matching standards and samples removes matrix artifacts and yields sulfur isotope ratios consistent with conventional techniques using matrix-clean analytes. Our method enables solid samples to be calibrated against aqueous standards; a consideration that is important when certified, isotopically-homogeneous and appropriately matrix-matched solid standards do not exist. Further, bulk and in situ analyses can be performed interchangeably in a single analytical session because the instrumental setup is identical for both. We validated the robustness of our analytical method through multiple isotope analyses of a range of reference materials and have compared these with isotope ratios determined using independent techniques. Long-term reproducibility of S isotope compositions is typically 0.20‰ and 0.45‰ (2σ) for solution and laser analysis, respectively. Our method affords the opportunity to make accurate and relatively precise S isotope measurement for a wide range of sulfur-bearing materials, and is particularly appropriate for geologic samples with complex matrix and for which high-resolution in situ analysis is critical.  相似文献   

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis   总被引：1，自引：0，他引：1  

Konstadinos N. Moutsopoulos  Alexandra Gemitzi  Vassilios A. Tsihrintzis 《Environmental Geology》2008,54(5):1081-1090

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.  相似文献