颗粒形状对珊瑚砂和石英砂沉降影响的试验研究     

金智涛  郑建国  张君  王锴锴  李杰  许国辉 《海洋通报》2021,40(4)

在研究海岸侵蚀的过程中,泥沙沉速是一个重要参数,对于侵淤量的计算非常重要。近些年来,由于工程活动、海洋动力和气候等因素变化的影响,珊瑚砂海岸的侵蚀冲刷问题已不容忽视。考虑到珊瑚砂与石英砂在形状、比重上的不同会对其沉速造成影响,套用现有石英砂的沉速公式进行计算并不合适。本文针对珊瑚砂和石英砂进行沉降试验,分析形状对珊瑚砂沉速的影响。结果显示,在小粒径(d 0.5 mm)下形状对珊瑚砂沉速的影响并不明显,在大粒径(d 0.5 mm)下明显减缓了珊瑚砂的沉降速度,套用石英砂的沉降公式计算出的珊瑚砂沉速明显偏大。故通过提出动力形状因子这一参数来表征形状对沉降的影响,推导出考虑了形状影响的沉降公式,能够较为准确地计算砂粒的沉速范围,计算精度随着黏度的增大而提升。  相似文献   

拟建鄱阳湖水利枢纽工程对长江干流流量影响的模拟     

赖格英  张志勇  王鹏  吴青  潘思怡  胡兴兴  陈桃金 《湖泊科学》2017,29(3):521-533

维系江湖关系的重要基础是江湖之间的物质通量,而江湖之间物质通量的核心内容是水的通量.规划中的鄱阳湖水利枢纽工程,以"一湖清水"为建设目标,坚持"江湖两利"的原则,按"调枯不控洪"方式运行.目前,国内学者对拟建的鄱阳湖水利枢纽工程可能导致湖泊影响方面的研究较多,但对该工程能否实现或维持"江湖两利"方面的研究较少.本文采用二维水动力模型,针对拟建的鄱阳湖水利枢纽工程和规划中的水位调度方案,分别从湖泊丰水期和枯水期两个时段,选择鄱阳湖丰、平、枯3种典型年型,在无枢纽与有枢纽两种情景模拟的基础上,定量分析丰、平、枯3种典型年枢纽工程的水位调度方案对长江干流流量的可能影响.模拟结果表明:在一个鄱阳湖水利枢纽工程水位调度周期中,无枢纽状态与有枢纽情景下湖泊外排到长江干流的径流总量差异很小,从模拟的年份来看,有枢纽外排减少量在0.2%~0.7%之间变化,基本维持了有枢纽与无枢纽状态下的水量平衡,但在一定程度上改变了湖泊外排长江干流水量的分配时间,使不同年型丰水期的湖泊外排水量有所减少,而在湖泊和长江低枯水期,对长江流量则有一定的增排作用,且增排效果为枯水年型平水年型丰水年型,不同年型的增排比例在2.1%~17.0%之间变化;在丰水期湖泊水位偏低,且枢纽位置的实际水位严重不足9 m的年型情况下,按照枢纽工程的水位调度方案要在9月15日将湖泊水位提升至14~15 m是难于实现的,现有的枢纽工程调度方案在这种情况下缺乏可操作性,有进一步细化和优化的空间.  相似文献   

Sodicity effects on hydrological processes of sodic soil slopes under simulated rainfall   总被引：1，自引：0，他引：1       下载免费PDF全文

Dongdong Liu  Dongli She 《水文研究》2017,31(5):981-994

Soil salinization can occur in many regions of the world. Soil sodicity affects rainfall‐runoff relationships and related erosion processes considerably. We investigated sodicity effects on infiltration, runoff and erosion processes on sodic soil slopes for two soils from China under simulated rainfall. Five sodicity levels were established in a silt loam and a silty clay with clay contents of 8.5% and 46.0%, respectively. The soils, packed in 50 cm × 30 cm × 15 cm flumes at two slope gradients (22° and 35°), were exposed to 60 min of simulated rainfall (deionized water) at a constant intensity of 125 mm h^?1. Results showed that, for both soils, increasing soil sodicity had some significant effects on hydrological processes, reducing the infiltration coefficient (pr = ?0.69, P  < 0.01) and the quasi‐steady final infiltration rate (pr = ?0.80, P  < 0.01), and increasing the mean sediment loss (pr = 0.39, P  < 0.05); however, it did not significantly affect the cumulative rainfall to ponding (P  > 0.05). Moreover, increasing sodicity significantly increased the Reynolds number and the stream power (pr = 0.78 and 0.66, P  < 0.01, respectively) of the runoff, decreased Manning roughness and Darcy–Weisbach coefficient (pr = ?0.52 and ?0.52, P  < 0.05, respectively), but did not significantly affect the mean flow velocity, mean flow depth, Froude number and hydraulic shear stress. Stream power was shown to be the most sensitive hydraulic variable affecting sediment loss for both soils. Furthermore, as sodicity increased, the values of critical stream power decreased for both the silt loam (R ² = 0.29, P  < 0.05) and the silty clay (R ² = 0.49, P  < 0.05). The findings of this study were applied to a real situation and identified some negative effects that can occur with increasing sodicity levels. This emphasized the importance of addressing the influences of soil sodicity in particularly high risk situations and when predicting soil and water losses.  相似文献   

Evaluating the performance of topobathymetric LiDAR to support multi-dimensional flow modelling in a gravel-bed mountain stream     

Daniele Tonina  James A. McKean  Rohan M. Benjankar  Elowyn Yager  Richard A. Carmichael  Qiuwen Chen  Aston Carpenter  Leah G. Kelsey  Michael R. Edmondson 《地球表面变化过程与地形》2020,45(12):2850-2868

Stream biophysical processes are commonly studied using multi-dimensional numerical modelling that quantifies flow hydraulics from which parameters such as habitat suitability, stream carrying capacity, and bed mobility are derived. These analyses would benefit from accurate high-resolution stream bathymetries spanning tens of kilometres of channel, especially in small streams or where navigation is difficult. Traditional ground-based survey methods are limited by survey time, dense vegetation and stream access, and are usually only feasible for short reaches. Conversely, airborne topobathymetric LiDAR surveys may overcome these limitations, although limited research is available on how errors in LiDAR-derived digital elevation models (DEMs) might propagate through flow models. This study investigated the performance of LiDAR-derived topobathymetry in support of multi-dimensional flow modelling and ecohydraulics calculations in two gravel-bedded reaches (approximately 200 m long), one morphologically complex and one morphologically simple, and at the segment scale (32 km-long stream segment) along a 15 m-wide river in central Idaho, USA. We compared metre and sub-metre-resolution DEMs generated from RTK-GPS ground and Experimental Advanced Airborne Research LiDAR-B (EAARL-B) surveys and water depths, velocities, shear stresses, habitat suitability, and bed mobility modelled with two-dimensional (2D) hydraulic models supported by LiDAR and ground-surveyed DEMs. Residual statistics, bias (B), and standard deviation (SD) of the residuals between depth and velocity predicted from the model supported by LiDAR and ground-survey topobathymetries were up to −0.04 (B) and 0.09 m (SD) for depth and −0.09 (B) and 0.20 m s⁻¹ (SD) for velocity. The accuracy (B = 0.05 m), precision (SD = 0.09 m), and point density (1 point m⁻²) of the LiDAR topobathymetric survey (regardless of reach complexity) were sufficient to support 2D hydrodynamic modelling and derivative stream habitat and process analyses, because these statistics were comparable to those of model calibration with B = 0 m and SD = 0.04 m for water surface elevation and B = 0.05 m s⁻¹ and SD = 0.22 m s⁻¹ for velocity in our investigation. © 2020 John Wiley & Sons, Ltd.  相似文献   

The transport of aggregates associated with soil organic carbon under the rain-induced overland flow on the Chinese Loess Plateau     

Lin Liu  Zhongwu Li  Haibing Xiao  Bing Wang  Xiaodong Nie  Chun Liu  Lingshan Ni  Danyang Wang 《地球表面变化过程与地形》2019,44(10):1895-1909

Organic carbon (OC) is easily enriched in sediment particles of different sizes due to aggregate breakdown and selective transport for sheet erosion. However, the transport of aggregate-associated OC has not been thoroughly investigated. To address this issue, 27 simulated rainfall experiments were conducted in a 1 m × 0.35 m box on slope gradients of 15°, 10°, and 15°and under three rainfall intensities of 45 mm h⁻¹, 90 mm h⁻¹ and 120 mm h⁻¹. The results showed that OC was obviously enriched in sediment particles of different sizes under sheet erosion. The soil organic carbon (SOC) concentrations of each aggregate size class in sediments were different from those in the original soil, especially when the rainfall intensity or slope was sufficiently low, such as 45 mm h^–1 or 5°, respectively. Under a slope of 5°, the SOC enrichment ratios (ERocs) of small macroaggregates and microaggregates were high but decreased over time. As rainfall intensity increased, OC became enriched in increasingly fine sediment particles. Under a rainfall intensity of 45 mm h^–1, the ERocs of the different aggregate size classes were always high throughout the entire erosion process. Under a rainfall intensity of > 45 mm h^–1 and slope of > 5°, the ERocs of the different aggregate size classes were close to 1.0, especially those of clay and silt. Therefore, the high ERocs in sediments resulted from the first transport of effective clay. Among total SOC loss, the proportion of OC loss caused by the transport of microaggregates and silt plus clay-sized particles was greater than 50%. We also found that low stream power and low water depth were two requirements for the high ERocs in aggregates. Stream power was closely related to sediment particle distribution. Flow velocity was significantly and positively related to the percentage of OC-enriched macroaggregates in the sediments (P > 0.01). Our study will provide important information for understanding the fate of SOC and building physical-based SOC transport models. © 2019 John Wiley & Sons, Ltd.  相似文献   

Discussion of “Experimental study on the hydraulic conductivity of calcareous sand in South China Sea”     

Mohamed Khaled Salahou  Weihua Guo 《Marine Georesources & Geotechnology》2018,36(3):297-298

Hydraulic conductivity of the granular soils depends on many factors including the soil density and the particle size distribution. For internally unstable soils, the hydraulic conductivity could be changed beyond a critical value of hydraulic gradient. This discussion calls attention to the effect of the internal stability on the hydraulic conductivity, where the internal stability of the soils is assessed and the critical hydraulic gradient is computed using some theoretical methods, and such calculations could be used to plan the experimental tests.  相似文献   

Hydraulic and geochemical interactions between surface water and sediment pore water in seasonal hypersaline Maharlu Lake,Iran     

Roghayeh Khosravi  Mehdi Zarei  Ondra Sracek 《水文研究》2020,34(15):3358-3369

Study of interactions between surface-water and pore-water in lakes is complicated due to spatio-temporal heterogeneities in flow condition across the sediment–water interface. In this study, seasonal hypersaline Maharlu Lake was investigated by collecting surface-water and pore-water samples from four nests of multilevel piezometers installed at different distances from the inflow of rivers to the lake. The hydraulic heads in the piezometers as well as vertical profiles of Mg⁺², Na/Cl, and Br/Cl were used to investigate both hydraulic and geochemical interactions between surface-water and pore-water in the lake. Depletion of lake surface water and pore water with respect to B, Br, Li⁺, K⁺, Mg²⁺ and the absence of Mg-K chlorides and sulphates in the lake bed sediments is probably due to leakage of highly evaporated residual brine from the lake. Hydraulic gradients in the multilevel piezometric nests indicate that a general downward flow from surface-water to pore-water occurs across sediment–water interface. Vertical profiles of Br/Cl, Mg²⁺, and Na/Cl showed that the maximum flow rate was more than 1 m/yr close to the mouth of the inflowing rivers. The downward vertical flow was limited in the area far from the inflowing rivers due to the presence of an impermeable confining halite layer which interrupts the hydraulic connection between shallow pore water (less than 50 cm deep) and deeper zones. The hydraulic and geochemical interactions between surface-water and pore-water across sediment–water interface in the Maharlu Lake are of interest to find out the fate of pollutants and their distribution in the lake.  相似文献   

一种新型的6000米深水可视可控轻型沉积物柱状取样系统     

王冰  栾振东  张鑫  李连福  连超  阎军  陈长安 《海洋科学》2018,42(7):25-31

为了获得连续、低扰动、超长的深海海底沉积物样品,研制了一套可应用于最大水深6 000 m,最长取样可达25 m的可视可控轻型沉积物柱状取样系统。本套设备主要包括甲板控制单元、取样系统和立式收放机构3部分。在取样过程中,本系统充分利用动能和深海液压锤夯击双动力组合,即取样过程包括前期的重力贯入和后期的夯击取样两个过程。液压锤夯击机构的配置使取样器在不显著增加自身重量的前提下,完成超长、连续、低扰动的深海沉积物柱状样采集工作。取样器的组合与拆卸采用立式吊装的方式,极大地降低了取样过程中的工作量和所需甲板作业空间。水下监测系统的配置解决了以往盲采样的弊端。除此之外,本取样器还设有多个标准通用端口,可以扩展为多种设备的集成平台,完成多种数据的采集。目前本套设备已经成功进行了海试,并作为主要沉积物取样设备成功应用于多个海上调查航次,取得了一系列连续、低扰动的柱状样品,有效地提高了我国深海可视可控柱状取样的技术水平。  相似文献   

Scaling laws for hydraulic fractures driven by a power-law fluid in homogeneous anisotropic rocks     

Egor V. Dontsov 《国际地质力学数值与分析法杂志》2019,43(2):519-529

This study investigates parametric space of solutions for a planar hydraulic fracture propagating in a homogeneous anisotropic rock. It is assumed that the fracture has an elliptical shape and is driven by a power-law fluid. The purpose of this study is to investigate the influence of anisotropy and power-law fluid rheology on the parametric space of solutions. Rock anisotropy is represented by having two values of fracture toughness, one in the vertical direction and another one in the horizontal direction. Similarly, the effect of elastic anisotropy is approximated by using two different effective elastic moduli in the vertical and horizontal directions. In contrast to the isotropic case, for which there are four limiting solutions, the problem for anisotropic rocks features six different limiting cases. These cases represent competition between toughness and viscosity in the vertical and horizontal directions and competition between fluid storage inside the fracture and fluid leak-off into formation. Approximate expressions for the limiting solutions are obtained using global volume balance and tip asymptotic solutions. Despite the developed solutions rely on a series of approximations, they precisely capture all the scaling laws associated with the problem. Zones of applicability of these limiting solutions are calculated, and their dependence on the problem parameters is investigated.  相似文献   

Clogging process by suspended solids during groundwater artificial recharge: Evidence from lab simulations and numerical modelling     

Tong Chu  Yuesuo Yang  Ying Lu  Xinqiang Du  Xueyan Ye 《水文研究》2019,33(25):3226-3235

Permeability reduction of infiltration media due to suspended solid (SS) clogging is the bane of groundwater artificial recharge. To overcome the clogging problem and advance the understanding of the process‐based spatial‐temporal evolution of SS clogging, a 1D laboratory column simulation was carried out, followed by numerical modelling of the experimental data in this study. It was found that clogging caused a reduction in the hydraulic conductivity (K) in the upper layer at the beginning and extended deeper to approximately 50 cm, and no reduction in K was detected below 52 cm throughout the experimental period of 129 hr. The most clogged layer spanned from the surface to a depth of 11 cm, and the middle 11–52 cm was characterized by a slight decrease in K. The clogging rates of the different layers decreased with the depth, which was based on data analysis, with the largest value of 0.038 hr^?1 in the upper 1 cm. The overall K began to decrease from the surface layer and was increasingly affected by clogging with time. A mathematical model was established to simulate the SS clogging process evolution based on considerations of the attachments and detachments of particles. Then the model was applied to perform several scenario analyses after calibration and validation using the data obtained in the experiment. The simulation results indicated that the SS concentration was much more sensitive than the groundwater depth below the land surface, and 10 days of constant recharge is recommended as the disposal cycle of the clogged layer under the given conditions.  相似文献