冲击地压关键层远程区域水力压裂防治技术          下载免费PDF全文

黄澎涛 《探矿工程》2021,48(S1):187-194

针对我国目前冲击地压防治工程人员身处冲击危险区域,无法实现区域先行、超前治理的局面,论文提出了矿井冲击地压关键层远程钻孔水力压裂防治技术。分析了我国冲击地压矿井的地质条件和近几年重大冲击地压灾害的特点,认为华北石炭—二叠系煤田和侏罗系煤田很多冲击地压煤矿煤层上覆地层,普遍发育厚层坚硬的砂岩关键层,能量的释放符合冲击地压形成的“3因素”理论。经论证,关键层脆性强,硬度大,易于压裂,利用水力压裂法解除地应力是合适的;井下长钻孔、地面深孔和地面导斜钻孔的施工技术和钻孔水力压裂技术已成熟,实现远程钻孔水力压裂区域性的防治冲击地压是可行的。工业性试验显示,井下长钻孔顺层分段水力压裂长度可达800 m,水压可达40 MPa,裂缝半径为40 m;地面垂直钻孔分段压裂深度可达3000 m,压裂段高>100 m,压力达80 MPa,裂缝半径为100~200 m;地面导斜钻孔水平顺层段长度达1000 m,压力达80 MPa,裂缝半径为100~150 m;压裂前后煤体应力或支架压力的检测数据对比显示,压裂后的应力较压裂前降低了10 MPa以上,满足区域治理的要求,钻孔远程水力压裂在防治冲击地压上较传统方法具有显著超前优势、区域优势、效率优势、安全优势和环保优势,可以做到冲击地压防治区段的无人化,满足区域先行、超前治理的国家要求。  相似文献   

WRF中土壤图及参数表的更新对华北夏季预报的影响研究   总被引：2，自引：0，他引：2  

卢冰  王薇  杨扬  仲跻芹  陈敏 《气象学报》2019,77(6):1028-1040

土壤质地及其物理性质的参数化对陆面过程模拟具有明显的影响。研究了土壤质地和土壤水文参数表的更新对WRF（Weather Research and Forecasting）模拟性能的影响。使用北京师范大学土壤属性数据集和修正后的土壤水文参数表替换WRF默认数据,对2017年6—8月华北地区开展数值模拟试验和评估验证。结果表明,模拟结果对土壤类型数据集和水文参数表的更新较为敏感,对地面要素预报有正效果。WRF默认土壤数据集中,中国东部以粘壤土为主,而在北京师范大学土壤数据集里则以壤土为主;修正后的土壤水文参数在Noah陆面过程中增强了裸土潜热蒸发能力。数值模拟试验表明,土壤输入数据和土壤水文参数的更新能够增强陆面向大气的潜热同时减弱感热输送,致使大气底层温度降低而湿度增大。利用华北区域748个地面气象观测站的2 m温度和2 m湿度对2017年夏季的模拟结果进行验证,结果显示更新试验对地面要素的预报偏差有较好的修正作用,能够将2 m温、湿度的预报技巧分别提高3.4%和2.9%。   相似文献   

In situ stress field of eastern Australia     

R. R. Hillis  J. R. Enever  S. D. Reynolds 《Australian Journal of Earth Sciences》2013,60(5):813-825

New in situ data based on hydraulic fracturing and overcoring have been compiled for eastern Australia, increasing from 23 to 110 the number of in situ stress analyses available for the area between and including the Bowen and Sydney Basins. The Bowen Basin displays a consistent north‐northeast maximum horizontal stress (σ_H) orientation over some 500 km. Stress orientations in the Sydney Basin are more variable than in the Bowen Basin, with areas of the Sydney Basin exhibiting north‐northeast, northeast, east‐west and bimodal σ_H orientations. Most new data indicate that the overburden stress (σ_V) is the minimum principal stress in both the Bowen and Sydney Basins. The Sydney Basin is relatively seismically active, whereas the Bowen Basin is relatively aseismic. Despite the fact that in situ stress measurements sample the stress field at shallower depth than the seismogenic zone, there is a correlation between the stress measurements and seismicity in the two areas. Mohr‐Coulomb analysis of the propensity for failure in the Sydney Basin suggests 41% of the new in situ stress data are indicative of failure, as opposed to 13% in the Bowen Basin. The multiple pre‐existing structural grains in the Sydney Basin further emphasise the difference between propensity for failure in the two areas. Previous modelling of intraplate stresses due to plate boundary forces has been less successful at predicting stress orientations in eastern than in western and central Australia. Nonetheless, stress orientation in the Bowen Basin is consistent with that predicted by modelling of stresses due to plate boundary forces. Variable stress orientations in the Sydney Basin suggest that more local sources of stress, such as those associated with the continental margin and with local structure, significantly influence stress orientation. The effect of local sources of stress may be relatively pronounced because stresses due to plate boundary forces result in low horizontal stress anisotropy in the Sydney Basin.  相似文献   

Effect of connecting rain barrels on the storage size reduction     

Yongwon Seo  Nam‐Jeong Choi  Daeryong Park 《水文研究》2012,26(23):3538-3551

In this article, the possibility of sharing rain barrels and the potential benefit of reducing storage size through physical and non‐physical connections of rain barrels in a community are investigated. Using the concepts of homogeneous/heterogeneous users in rainwater harvesting systems (RWHS), two simple cases of a community composed of four prospective users are examined. The first is performed with the users who have the same mean and variance in water demands (homogeneous users), and the second is with the users with different means and variances (heterogeneous users). To take account for the rainfall characteristics in different places, historical records from six cities in the USA are used for storage–reliability–yield analysis. The result indicates that required total storage can be reduced by connecting multiple rain barrels. In addition, a significant difference is found between homogeneous and heterogeneous user groups. Homogeneous users do not achieve a substantial benefit from connecting their rain barrels; these users may even be disadvantaged by sharing. In contrast, heterogeneous users receive benefit by reducing the total required storage. Most benefit is expected between users with maximum difference in mean water demands. The reduction in storage size was as considerable as 37% in this study. The quantity of storage reduction depends on locations and target reliabilities. Knowledge of the benefits and limitations of rain barrel connections can improve RWHS performance through ability to customize a network plan for individual users. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds     

K. Huang  Z. Zhang  Ahmad Ghassemi 《国际地质力学数值与分析法杂志》2013,37(13):2021-2038

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Influence of pore size and geometry on peat unsaturated hydraulic conductivity computed from 3D computed tomography image analysis     

F. Rezanezhad  W. L. Quinton  J. S. Price  T. R. Elliot  D. Elrick  K. R. Shook 《水文研究》2010,24(21):2983-2994

In organic soils, hydraulic conductivity is related to the degree of decomposition and soil compression, which reduce the effective pore diameter and consequently restrict water flow. This study investigates how the size distribution and geometry of air‐filled pores control the unsaturated hydraulic conductivity of peat soils using high‐resolution (45 µm) three‐dimensional (3D) X‐ray computed tomography (CT) and digital image processing of four peat sub‐samples from varying depths under a constant soil water pressure head. Pore structure and configuration in peat were found to be irregular, with volume and cross‐sectional area showing fractal behaviour that suggests pores having smaller values of the fractal dimension in deeper, more decomposed peat, have higher tortuosity and lower connectivity, which influences hydraulic conductivity. The image analysis showed that the large reduction of unsaturated hydraulic conductivity with depth is essentially controlled by air‐filled pore hydraulic radius, tortuosity, air‐filled pore density and the fractal dimension due to degree of decomposition and compression of the organic matter. The comparisons between unsaturated hydraulic conductivity computed from the air‐filled pore size and geometric distribution showed satisfactory agreement with direct measurements using the permeameter method. This understanding is important in characterizing peat properties and its heterogeneity for monitoring the progress of complex flow processes at the field scale in peatlands. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Evaluation of a probabilistic approach to simulation of alkalinity and electrical conductivity at a river bank filtration site     

A. K. Thakur  V. P. Singh  C. S. P. Ojha 《水文研究》2012,26(22):3362-3368

In river bank filtration, impurities present in the river water travel with the bank filtrate towards the pumping well. During this passage, certain types of impurities, such as turbidity, total coliform, and so forth, may get attenuated; however, it is interesting to note that some of the instant raw river water quality parameters, such as alkalinity and electrical conductivity, increase after the passage of water through the porous medium. This occurs because water, when passing through the soil pores, absorbs many of the solutes that cause an increase in alkalinity and electrical conductivity. Measurements at a river bank filtration site for a year showed that alkalinity of 116–32 mg l^?1 in river water increased to 222.4–159.9 mg l^?1 in the river bank filtered water. Likewise, the electrical conductivity increased from 280–131 μS cm^?1 to 462–409.6 μS cm^?1. This study uses a probabilistic approach for investigating the variation of alkalinity and electrical conductivity of source water that varies with the natural logarithm of the concentration of influent water. The probabilistic approach has the potential of being used in simulating the variation of alkalinity and electrical conductivity in river bank filtrate. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir     

Bin Xu  Ron C.K. Wong 《国际地质力学数值与分析法杂志》2013,37(18):3131-3149

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Hydraulic diffusivity and macrodispersivity calculations embedded in a geographic information system     

F.A.L. Pacheco 《水文科学杂志》2013,58(4):930-944

Abstract

A numerical technique is presented whereby aquifer hydraulic diffusivities (D) and macrodispersivities (α) are calculated by linear equations rewritten from flow and solute transport differential equations. The approach requires a GIS to calculate spatial and temporal hydraulic head (h) and solute concentration gradients. The model is tested in Portugal, in a semi-confined aquifer periodically monitored for h and chloride/sulphate concentrations. Average D (0.46 m²/s) and α (1975 m) compare favourably with literature results. The relationship between α and scale (L) is also investigated. In this context, two aquifer groups could be identified: the first group is heterogeneous at the “macroscopic” scale (solute travelled distances <1 km), but homogeneous at the “megascopic” scale. The overall scale dependency in this case is given by an equation of logarithmic type. The second group is heterogeneous at the macroscopic and megascopic scales, with a scale dependency of linear type.

Citation Pacheco, F.A.L., 2013. Hydraulic diffusivity and macrodispersivity calculations embedded in a geographic information system. Hydrological Sciences Journal, 58 (4), 930–944.  相似文献   

聚合物驱组合段塞分注实验研究     

李宜强  林丽华  梁双庆 《海洋地质译丛》2010,(1):85-89

萨尔图油田南二区东部140号断层以东地区葡11—4油层，以多段多韵律和正韵律沉积为主，平均孔隙度30．0％，平均空气渗透率1980×10^-3μm2。水驱结束时该油层平均含水92％，采出程度39．5％。计划对该区块实施聚合物驱开采。以往经验认为，组合段塞调整注聚技术能够有效改善流度控制作用。然而对组合注入情况下如何进一步提高驱油效果、注入井分注时机、层段注入强度对开发效果有何影响却很少探讨。通过室内驱油实验，在聚驱的组合段塞注入不同时机（水驱空白阶段、含水下降阶段、含水稳定阶段、含水回升阶段）下调整注入强度实施分注以及在含水回升分注基础上进一步调整注入强度，同时对比不分注实验，评价各方案驱油效果。实验表明：不实施分注时聚驱采收率在水驱基础上提高了19．07个百分点，而组合段塞注入时实施分注均能够在不分注基础上进一步提高驱油效果；空白水驱时实施分注采收率提高幅度最大，为26．55个百分点；随着分注时机的滞后采收率提高幅度增加值依次递减，分注时机越早越好。  相似文献