Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend          下载免费PDF全文

Jinxi Song  Guotao Zhang  Weize Wang  Qi Liu  Weiwei Jiang  Weiqiang Guo  Bin Tang  Haifeng Bai  Xinyi Dou 《水文研究》2017,31(19):3407-3420

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.  相似文献   

Hydraulic modeling of flood pulses in the Middle Bussento Karst System (MBSKS), UNESCO Cilento Global Geopark,southern Italy          下载免费PDF全文

Vittorio Bovolin  Albina Cuomo  Domenico Guida 《水文研究》2017,31(3):639-653

Karst systems provide water for domestic and industrial uses and for generating hydropower, but they can also create fluvial hazards, such as upstream back‐flooding and downstream karst flash‐flood events. However, these hazards are difficult to foresee due to the complex recharge‐discharge processes as well as the lack of information on the inside of the system, which has often not been completely surveyed by speleologists or explored by boreholes. To overcome these difficulties, hydro‐chemical data from the monitoring system in the Middle Bussento Karst System (MBSKS), one of the first Experimental Karst Systems in southern Italy, were recorded and previously discussed. Based on shared background in flood karst hydraulic modeling, this paper describes the conceptual premises and rationale of a general‐purpose hydraulic model that is suitable both for the MBSKS and for other Mediterranean, multi‐recharge, mature, conduit‐dominated karst systems. To test the reliability of the model, simulations of time–space behavior and response are performed using natural and artificial flood pulses “as tracers”, considering a “pulse” as a significant variation in water quantity and/or quality. The results of the model explain the interactions between allogenic, autogenic, and anthropogenic recharges from differentiated sources and phreatic conduit systems. These results also clarify the overall response of karst springs at typical time scales of flood pulses. Table acronym name  相似文献   

Influence of heterogeneity on unsaturated hydraulic properties: (1) local heterogeneity and scale effect     

Pen‐Yuan Chen  Chu‐Hui Chen  Nien‐Sheng Hsu  Cheng‐Mau Wu  Jet‐Chau Wen 《水文研究》2012,26(23):3593-3603

Spatial heterogeneity is ubiquitous in nature, which may significantly affect the soil hydraulic property curves. The models of a closed‐form functional relationship of soil hydraulic property curves (e.g. VG model or exponential model) are valid at point or local scale based on a point‐scale hydrological process, but how do scale effects of heterogeneity have an influence on the parameters of these models when the models are used in a larger scale process? This paper uses a two‐dimensional variably saturated flow and solute transport finite element model (VSAFT2) to simulate variations of pressure and moisture content in the soil flume under a constant head boundary condition. By changing different numerical simulation block sizes, a quantitative evaluation of parameter variations in the VG model, resulting from the scale effects, is presented. Results show that the parameters of soil hydraulic properties are independent of scale in homogeneous media. Parameters of α and n in homogeneous media, which are estimated by using the unsaturated hydraulic conductivity curve (UHC) or the soil water retention curve (WRC), are identical. Variations of local heterogeneities strongly affect the soil hydraulic properties, and the scale affects the results of the parameter estimations when numerical experiments are conducted. Furthermore, the discrepancy of each curve becomes considerable when moisture content becomes closer to a dry situation. Parameters estimated by UHC are totally different from the ones estimated by WRC. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling     

《Computers and Geotechnics》2016

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.  相似文献   

Research on Formation Mechanisms of Hot Dry Rock Resources in China   总被引：3，自引：0，他引：3  

WANG Guiling  LIN Wenjing  ZHANG Wei  LU Chuan  MA Feng  GAN Haonan 《《地质学报》英文版》2016,90(4):1418-1433

As an important geothermal resource, hot dry rock(HDR) reserves have been studied in many countries. HDR resources in China have huge capacity and have become one of the most important resources for the potential replacement of fossil fuels. However, HDR resources are difficult to develop and utilise. Technologies for use with HDR, such as high–temperature drilling, reservoir characterisation, reservoir fracturing, microseismic monitoring and high–temperature power stations, originate from the field of oil and drilling. Addressing how to take advantage of these developed technologies is a key factor in the development of HDR reserves. Based on the thermal crustal structure in China, HDR resources can be divided into four types: high radioactive heat production, sedimentary basin, modern volcano and the inner–plate active tectonic belt. The prospective regions of HDR resources are located in South Tibet, West Yunnan, the southeast coast of China, Bohai Rim, Songliao Basin and Guanzhong Basin. The related essential technologies are relatively mature, and the prospect of HDR power generation is promising. Therefore, analysing the formation mechanisms of HDR resources and promoting the transformation of technological achievements, large–scale development and the utilisation of HDR resources can be achieved in China.  相似文献   

遥感在宁夏贺兰山东北段1∶50000区域地质调查中的应用研究   总被引：1，自引：0，他引：1  

张晓东  刘湘南  李明涛  赵志鹏  梁志荣  禇小东 《矿产与地质》2016,(4):674-680

以SPOT5及ETM+影像为基础数据,采用3D GIS遥感技术,通过对研究区岩性地层、线性构造、环形构造等地质体的遥感影像特征系统总结,结合野外调查,建立岩性地层及构造解译标志,对宁夏贺兰山东北段1∶50 000区域地质调查工作区进行遥感地质解译。解译结果表明:研究区西部多被贺兰山岩群和古元古代花岗岩覆盖,中部及东南部大部分为第四系和新近系地层;东部石峡谷、黑龙贵及老石旦镇地区,主要出露地层有奥陶系及寒武系;研究区构造发育,主要分布在西部贺兰山基岩区,共解译出线性构造113条,以NEE向和近SN向线性构造最为发育,线性构造相互切割,形成"块状"特征;环形构造33个,在区域上总体呈SN向条带状分布;褶皱4处,均为紧密型褶皱组合;不整合界线1条;总体呈"西部构造发育,局部呈块状,东西差异明显"的特点。实践表明,在1∶50 000区域地质调查中应用遥感和GIS相结合的方法,对提高区域地层构造认识以及遥感解译精度有较大帮助,能有效提高填图质量和工作效率,在区域地质调查工作中有良好的应用价值。  相似文献   

冰盖下矩形河道的综合糙率          下载免费PDF全文

陈刚  张玉蓉  周密  顾世祥 《水科学进展》2016,27(2):290-298

综合糙率是采用曼宁公式确定河道水位和流量关系的关键参数。在河道冰封期,冰盖的出现增加了流动的阻力,明流条件下确定的综合糙率不再适用,需要重新估算。基于Einstein阻力划分过流断面的原理,冰盖下矩形河道的过水断面可划分为冰盖区、河床区和边壁区。根据总流的连续性方程,在确定各分区糙率系数、水力半径和断面面积的基础上,提出了冰盖下矩形河道综合糙率的计算公式。采用已有的试验水槽测量数据和天然河道实测资料对公式进行了验证,结果表明:公式计算的综合糙率与实测值吻合较好,与Einstein公式和Sabaneev公式相比,计算精度更高;对于冰封水流,宽浅河道采用分区水深代替水力半径进行简化计算的条件有别于明渠水流,在宽深比大于20时,计算结果才满足精度要求。  相似文献   

赣北红土区工程堆积体坡面水动力特性   总被引：1，自引：0，他引：1       下载免费PDF全文

王雪松  陈曦  马洪超  谢永生 《水科学进展》2016,27(3):412-422

为探明锥状工程堆积体坡面薄层水流剥蚀率与水力要素之间的关系, 室内模拟赣北红土区散乱锥状工程堆积体。通过人工降雨试验, 设计4种降雨强度(1.0~2.5mm/min)和3种砾石含量(10%~30%)完全组合。采用灰色关联度分析法, 评估坡面水力参数与土壤剥蚀率之间的关联度。结果表明:① 在试验条件下, 坡面水流功率与土壤剥蚀率呈幂函数关系;② 当堆积体砾石含量一定时, 以降雨强度为变量能反映堆积体坡面水力参数与土壤剥蚀率之间的关联度;③ 当降雨强度一定时, 大雨强下(≥1.5mm/min)堆积体砾石含量不宜作为灰色关联度分析的变量。综上所述, 水流功率是描述赣北红土区锥状工程堆积体侵蚀过程的最佳水力参数, 可用于建立堆积体侵蚀物理模型。  相似文献   

钻孔压水试验水压式栓塞排水泄压问题研究          下载免费PDF全文

裴熊伟 《探矿工程》2016,43(3):56-59

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。  相似文献   

基岩水井压裂增水机理分析          下载免费PDF全文

李炳平  何计彬  康志鸿 《探矿工程》2016,43(1):61-65

基岩地层压裂增水与岩层性质密切相关,不同岩性其力学性质及其裂隙构造不同,压裂机理与工艺方法就不同。根据基岩地下水岩层特点,结合水力压裂增水试验,着重分析了水力压裂的形成机制,探寻了不同岩层及其力学性质与压裂的关系。  相似文献