首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   59篇
  免费   7篇
  国内免费   18篇
大气科学   21篇
地球物理   12篇
地质学   28篇
海洋学   14篇
综合类   6篇
自然地理   3篇
  2021年   1篇
  2020年   1篇
  2019年   2篇
  2018年   4篇
  2017年   2篇
  2016年   4篇
  2015年   1篇
  2014年   5篇
  2013年   7篇
  2012年   3篇
  2011年   2篇
  2010年   2篇
  2009年   4篇
  2008年   5篇
  2007年   1篇
  2006年   3篇
  2005年   2篇
  2004年   5篇
  2003年   2篇
  2002年   1篇
  2001年   2篇
  2000年   1篇
  1999年   4篇
  1998年   2篇
  1997年   3篇
  1996年   3篇
  1995年   1篇
  1994年   2篇
  1992年   4篇
  1991年   3篇
  1987年   1篇
  1986年   1篇
排序方式: 共有84条查询结果,搜索用时 31 毫秒
21.
以天津汉沽盐场高镁卤水为研究对象,对其杂质形式、成色原因进行了系统分析。研究表明,卤水中的成色物质主要是大量的饱和脂类、羧酸类、醇醚类、胺类及不饱和的芳烃类、醛酮类、烯烃类等有机物质,经过氧化氢氧化-氢氧化锆吸附联合脱色工艺后,卤水色度及CODCr去除率分别可达99%和85%,镁离子的损失率可控制在1%以下,吸附剂氢氧化锆经脱附再生后可循环使用,大大降低了工艺运行成本。  相似文献   
22.
高压密闭消解因称样量小、用酸量少、空白低等优点成为测定稀土元素前处理的主要方法。但锰矿石组分复杂,锰含量差别较大且具有多种不同价态,常含有伴(共)生金属和其他杂质,该方法采用常规酸溶体系很难将其消解完全,造成ICP-MS测试结果不准确。本文从样品前处理消解效果出发,选择锰矿石标准物质GBW07261、GBW07263、GBW07266和一个锰矿石样品,试验了三种酸溶前处理方法对锰矿石稀土元素测试的影响。结果表明:方法一(氢氟酸-硝酸密闭消解,硝酸复溶提取)不能将锰矿石样品完全消解,测定值偏低0. 28%~61. 31%;方法二(氢氟酸-硝酸-双氧水密闭消解,硝酸-双氧水复溶,硝酸提取)和方法三(氢氟酸-硝酸密闭消解,盐酸复溶,硝酸提取)均可将锰矿石样品消解完全,用ICP-MS测定稀土元素的数据较为接近,与传统的过氧化钠熔融ICP-MS法测定值吻合。但实验过程中发现对于锰含量较高的样品,方法三需多次重复加入盐酸复溶后方可将样品消解完全,而方法二复溶一次即可。因此,方法二对锰矿石样品的消解效率更高,精密度好(0. 96%~2. 68%),加标回收率在95. 0%~107. 0%之间,更适用于锰矿石中稀土元素的分析。  相似文献   
23.
As molecular weight controls the biological activities of polysaccharides, screening the optimal molecular weight of polysaccharides is important in drug research and application. In this study, hydrogen peroxide was employed as oxidant, and temperature, reaction time, and concentration of polysaccharides and hydrogen peroxide were examined for their effects on the preparation of polysaccharides in different molecular weights fromUlva pertusa. Our experiment suggested that the optimal degradation concentrations for polysaccharides and hydrogen peroxide were 2.5% (w/v) and 8.0% (v/v), respectively. The range of degradation measured by relative viscosity was mainly controlled by temperature and time. Results revealed that 35°C was the optimal temperature for obtaining low-degradation samples, and 50°C was the most favorable temperature to accelerate the reaction to yield highly-degraded samples. Four samples in different molecular weights A, B, C and D were finally prepared. The controllability was evaluated by the relative standard deviation (RSD) of relative viscosity, and the peak molecular weights and the polydispersity indexes (Mw/Mn) of molecular weights were measured by high performance gel permeation chromatography (HPGPC). This work was supported by the Scientific and Technical Bureau of Shandong Province.  相似文献   
24.
锡矿石是难分解的矿物,共生与伴生元素多,其中的锡钨钼在单一盐酸溶液中易沉淀,准确测定锡矿石中的主次量元素一直是分析技术难点。本文以过氧化钠为熔剂,高温熔融样品,在酒石酸-盐酸-双氧水体系中进行酸化,选用该矿种中仅含有少量的钴作为内标,建立了电感耦合等离子体发射光谱同时测定锡矿石中锡钨钼铜铅锌的分析方法。方法线性范围为0.00~40.0 mg/L;方法检出限为锡10 mg/kg,钨30 mg/kg,钼3.3 mg/kg,铜12 mg/kg,铅15 mg/kg,锌40 mg/kg;方法精密度(n = 9)小于5.0%,实际样品的测定值与传统化学方法及国家标准方法的测定值吻合较好。本方法采用过氧化钠碱熔锡矿石,溶样彻底,并省去了氢氟酸挥发硅的蒸酸过程,节约了样品处理时间;采用酒石酸-双氧水-盐酸体系溶解熔融物,有利于溶液中的锡钨钼形成稳定的络合物,避免了单纯盐酸体系下产生钨酸、钼酸和锡酸沉淀导致测定结果偏低的问题。  相似文献   
25.
In this work, the treatment of photographic processing wastewaters (PPW) by electro‐Fenton process has been investigated. The Influence of operating conditions on kinetics and efficiency of electro‐Fenton process has been evaluated using carbon felt cathode and platinium (Pt) or boron‐doped diamond (BDD) anode. The results of electro‐Fenton treatment of PPW have shown that nearly complete removal of total phenols was obtained for all combinations with pseudo‐first rate constants of 0.07, 0.012, and 0.018/min for carbon felt/Pt, carbon felt/BDD and Pt/BDD cathode/anode combinations, respectively. The combination of carbon felt cathode with BDD anode achieved the highest total organic carbon (TOC) removal of 90%, while it did not exeed 40% for carbon felt/Pt combination. Increasing current intensity and Fe2+ dose enhances the efficiency of electro‐Fenton process. However, increasing pH decreases TOC removal during the treatment of PPW by electro‐Fenton process. The highest efficiency of electro‐Fenton process using BDD anode can be explained by the contribution of direct and indirect oxidation routes in the degradation mechanism of organics including (i) oxidation via hydroxyl radicals generated from the catalytic decomposition of H2O2 and from water discharge on BDD anode, (ii) direct oxidation of certain organic compounds on BDD anode, and (iii) mediated oxidation with inorganic oxidants electrogenerated from anodic oxidation of supporting salts.  相似文献   
26.
在pH=4.5的HAc-NaAc缓冲溶液介质中,以溴化十六烷基吡啶(CPB)为增敏剂,痕量Cu(Ⅱ)能催化过氧化氢氧化溴酚蓝使之褪色,据此用于测定痕量铜。讨论了介质、试剂用量、反应温度、反应时间、表面活性剂及其共存离子的影响,确定测定波长为593 nm及最佳实验条件,测得反应表观活化能为90.3kJ/mol。在优化条件下,方法检出限为0.646 ng/mL,Cu(Ⅱ)的质量浓度在0~0.064μg/mL范围内与lg(A0/A)呈良好的线性关系,大多数常见元素不干扰测定。方法用于煤样中痕量铜的分析,5次测定的相对标准偏差小于3.1%,加标回收率在92.7%~107.0%,测定结果与原子吸收光谱法的结果一致。  相似文献   
27.
28.
29.
Two‐dimensional model of diffusion processes around a river mouth   总被引:1,自引:1,他引:0  
The steady state diffusion equation is solved for two‐dimensional flow around a point source along an infinite straight boundary. Solutions obtained are related to the observed distribution of temperature and salinity around the mouth of the Buller River, South Island, New Zealand.  相似文献   
30.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号