滇池微生物解磷与聚磷作用的实验研究及磷的现代沉积与微生物成矿作用   总被引：4，自引：0，他引：4  

东野脉兴  樊竹青  张灼  夏学惠  田升平  周建民 《吉林大学学报(地球科学版)》2003,33(3):282-289

滇池是世界上磷质来源最丰富的湖泊，是研究磷的现代沉积和微生物对磷循环作用及微生物成矿的天然场所。研究发现，滇池微生物种群和数量繁多，但能对磷溶解、转化、迁移、聚集、沉积的微生物主要有解磷菌和聚磷菌两类。这两类微生物与滇池磷的含量之间有一系列规律的相关性：在底泥磷高含量区域，解磷菌的种群和数量与底泥磷含量成负相关关系，与水体磷含量成正相关关系，而聚磷菌的种群和数量与底泥磷含量成正相关关系，与水体磷含量成负相关关系；在底泥磷低含量区域，上述相关性则相反。滇池中这种活着的微生物在自然环境条件下对磷的溶解、转化、迁移、聚集和沉积的作用，对古磷块岩微生物成矿说提供了可靠的依据，而且对以磷为限制性因子的湖、海、江河环境污染的防治提供了理论资料。  相似文献   

一种典型的同生沉积型微细浸染型金矿床--桂西北高龙金矿床     

陈翠华  何彬彬  顾雪祥  刘建明 《吉林大学学报(地球科学版)》2003,33(3):290-295

桂西北高龙微细浸染型金矿床位于广西田林县高龙乡。含矿硅质岩与热水沉积作用有关，而非首人认为的断裂破碎—热液硅化交代岩。矿床的典型地质特征以及地球化学特征显示该矿床具有典型的同生沉积—准同生成岩的成因特征，矿床属同生沉积型，而不是前人认为的后生热液改造型。矿床的形成与右江沉积盆地演化关系密切，含矿流体为以大气降水为主要补给源的深循环盆地卤水和与沉积物发生了同位素交换的埋藏古海水，流体的运移方式以压实驱动流为主，含矿流体主要以沉积喷流方式成矿。  相似文献   

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China   总被引：2，自引：0，他引：2  

陈多福  陈先沛  陈光谦 《中国科学D辑(英文版)》2003,46(Z1)

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.  相似文献   

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada     

Carl L. Amos  Ian G. Droppo  Eduardo A. Gomez  Tom P. Murphy 《Sedimentology》2003,50(1):149-168

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.  相似文献   

A mineral equilibria study of the hydrothermal alteration in mafic greenschist facies rocks at Kalgoorlie, Western Australia   总被引：4，自引：0，他引：4  

R. W. White  R. Powell  G. N. Phillips 《Journal of Metamorphic Geology》2003,21(5):455-468

The influx of a H₂O–CO₂‐dominated fluid into actinolite‐bearing metabasic rocks during greenschist facies metamorphism in the Kalgoorlie area of Western Australia resulted in a zoned alteration halo around inferred fluid conduits that contain gold mineralisation. The alteration halo is divided into two outer zones, the chlorite zone and the carbonate zone, and an inner pyrite zone adjacent to the inferred fluid conduits. Reaction between the fluid and the protolith resulted in the breakdown of actinolite and the development of chlorite, dolomite, calcite and siderite. In addition, rocks in the pyrite zone developed muscovite‐bearing assemblages as a consequence of the introduction of potassium by the fluid. Mineral equilibria calculations undertaken using the computer software thermocalc in the model system Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–CO₂ show that mineral assemblages in the outer zones of the alteration halo are consistent with equilibrium of the protoliths with a fluid of composition X_CO2 = CO₂/(CO₂ + H₂O) = 0.1–0.25 for temperatures of 315–320 °C. The inner zone of the alteration halo reflect equilibrium with a fluid of composition X_CO2≈ 0.25. Fluid‐rock buffering calculations show that the alteration halo is consistent with interaction with a single fluid composition and that the zoned structure of the halo reflects the volume of this fluid with which the rocks reacted. This fluid is likely to have also been the one responsible for the gold mineralisation at Kalgoorlie.  相似文献   

Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan     

Shinichi Takakura  Nobuo Matsushima 《Resource Geology》2003,53(3):213-220

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.  相似文献   

Chemical, Isotopic, and Fluid Inclusion Evidence for the Hydrothermal Alteration of the Footwall Rocks of the BIF-Hosted Iron Ore Deposits in the Hamersley District, Western Australia     

Makoto Haruna    Takahiro Hanamuro    Kaoru Uyeda    Hirokazu Fujimaki  Hiroshi Ohmoto 《Resource Geology》2003,53(2):75-88

Abstract. The petrography, chemical, fluid inclusion and isotope analyses (O, Rb-Sr) were conducted for the shale samples of the Mount McRae Shale collected from the Tom Price, Newman, and Paraburdoo mines in the Hamersley Basin, Western Australia. The Mount McRae Shale at these mines occurs as a footwall unit of the secondary, hematite-rich iron ores derived from the Brockman Iron Formation, one of the largest banded iron formations (BIFs) in the world. Unusually low contents of Na, Ca, and Sr in the shales suggest that these elements were leached away from the shale after deposition. The δ¹⁸O (SMOW) values fall in the range of + 15.0 to +17.9 per mil and show the positive correlation with calculated quartz/sericite ratios of the shale samples. This suggests that the oxygen isotopic compositions of shale samples were homogenized and equilibrated by postdepositional event. The pyrite nodules hosted by shales are often rimmed by thin layers of silica of varying crystallinity. Fluid inclusions in quartz crystals rimming a pyrite nodule show homogenization temperatures ranging from 100 to 240C for 47 inclusions and salinities ranging from 0.4 to 12.3 wt% NaCl equivalent for 18 inclusions. These fluid inclusion data give direct evidence for the hydrothermal activity and are comparable to those of the vein quartz collected from the BIF-derived secondary iron ores (Taylor et al, 2001). The Rb-Sr age for the Mount McRae Shale is 1,952 ± 289 Ma and at least 200 million years younger than the depositional age of the Brockman Iron Formation of ∼ 2.5 Ga in age. All the data obtained in this study are consistent with the suggestion that high temperature hydrothermal fluids were responsible for both the secondary iron ore formation and the alteration of the Mount McRae Shale.  相似文献   

Submarine hydrothermal mineralization in the Okinawa Trough, SW of Japan: an overview   总被引：3，自引：0，他引：3  

G. P. Glasby  K. Notsu   《Ore Geology Reviews》2003,23(3-4):299-339

The Okinawa Trough is a heavily sedimented, rifted back-arc basin formed in an intracontinental rift zone. Submarine hydrothermal activity is located within the six back-arc rifts located in the middle and southern Okinawa Trough and its distribution is controlled principally by tectonic factors. Subduction of the Daito and Gagua Ridges beneath the Ryukyu Arc has resulted in fracturing of the brittle lithosphere beneath the Okinawa Trough. Hydrothermal activity is strongest in the volcanic arc-rift migration phenomenon (VAMP) area plus the JADE site and Southernmost Part of the Okinawa Trough (SPOT) area which form the prolongation of these two ridges. These areas are characterized by extremely high heat flow locally. Submarine hydrothermal fluids from the Okinawa Trough tend to be strongly influenced by interaction of the hydrothermal fluids with organic matter in the sediment resulting in high alkalinity and NH₄⁺ concentrations of the fluids. The fluids also contain high concentrations of CO₂ of magmatic origin. Submarine hydrothermal mineralization in the trough is diverse. The CLAM site consists principally of carbonate chimneys. Interaction of the hydrothermal fluid with organic matter in the sediment is particularly strong at this site. This is most probably a sediment-hosted deposit in which sulphide minerals have deposited within the sediment column leaving ‘spent ore-fluids’ to emerge at the seafloor. The JADE site consists of active and inactive sulphide–sulphate chimneys and mounds. The Zn–Pb-rich sulphides at this site contain the highest concentrations of Pb, Ag and Au so far recorded in submarine hydrothermal sulphide deposits. At Minami-Ensei Knoll and Hatoma Knoll, active and inactive chimneys consist principally of anhydrite and barite as a result of phase separation of the hydrothermal fluids beneath the seafloor. An intense black smoker has recently been discovered at Yonaguni Knoll in the SPOT area. If it is confirmed that sulphide mineralization is dominant at this site, this could be a highly prospective area. The most prospective areas for economic-grade minerals in the Okinawa Trough appear to be the JADE site and the SPOT area.  相似文献   

农田生态系统大气硫沉降通量的观测研究   总被引：6，自引：1，他引：6       下载免费PDF全文

张明  王体健  张艳  胡正义  徐成凯 《气象科学》2003,23(3):263-272

1998年 11月～ 1999年 10月间在中国科学院红壤站 (江西鹰潭 )农田小气候站进行了大气二氧化硫 (SO2 )、硫酸盐粒子 (SO2 -4)浓度采样和雨水样本收集 ,利用阻力模式和全年逐时气象资料计算 SO2 和 SO2 -4的干沉降速度 ,估算干沉降通量 ,利用降水资料和雨水中硫酸根离子浓度估计大气硫的湿沉降 ,从而定量研究大气硫沉降输入农田生态系统的通量 ,结果表明 :农田下垫面上 SO2 和 SO2 -4干沉降速度的年平均值分别是 0 .373± 0 .170 cm· s-1(月均值 0 .16 1～ 0 .5 45 cm·s-1)、0 .198± 0 .12 3cm· s-1(月均值 0 .15 2～ 0 .2 6 9cm· s-1)。农田下垫面硫年总沉降量为 10 .3g· m-2 ,其中干沉降占总沉降的 83.3%。硫的干沉降又以 SO2 的干沉降为主 ,占年干沉降总量的 92 .2 %。大气硫沉降输入占农田生态系统输入总量的 90 %以上 ,是农田生态系统获取硫素的一个重要途径  相似文献   

Quantitative Evaluation of Water Deposited By Dew on Monuments   总被引：1，自引：0，他引：1  

Dario Camuffo  Roberta Giorio 《Boundary-Layer Meteorology》2003,107(3):655-672

Samples of White and Green Carrara marble, and three types oflimestone and brick exposed in the field vertically and horizontally were used to evaluate condensationon monuments during clear sky nights. Experiments in a simulation chamber under controlledconditions led to a general equation for the actual amount of water deposited on a surface by dew.This is determined by: How much and for how long the surface temperature falls below the dew point,the moisture content in the air and the ventilation. On clear nights, the condensation on buildingstructures facing the sky may reach some 0.2 kg m^-2 (or 0.2 mm), whereas condensation on verticalsurfaces is very small. Computation of the seasonal trend of night-time condensationshowed that the maximum amount of water condensed per night occurs in the autumn, with the moreabundant concentration of moisture in the air. The total amount of water condensed per month isfound to be a maximum in the summer-autumn period. Morning condensationfor the thermal inertia of monuments is also relevant, and has been calculated to reach the same order of magnitude as thenocturnal dew. A detailed analysis of the temperature and mixing ratio profiles near a condensingsurface has shown two different situations. In still air, the two profiles follow an exponentiallaw and the thermal and the concentration layers lie within a few tens of millimetres. Inthe presence of turbulence, the thickness of these two layers is dramatically reduced. In still air, infront of a vertical, chilly surface, the deposition rate of air pollutants by thermophoresis and/orStefan flow is increased by 3 or 4 times in comparison with a horizontal surface. In the presence ofturbulence, the thickness of the thermal and concentration layers was dramatically reduced, makingthese two kinds of deposition much faster.  相似文献