Assessing radial transmissivity variation in heterogeneous aquifers using analytical techniques          下载免费PDF全文

Cem B. Avci  A. Ufuk Sahin 《水文研究》2014,28(23):5739-5754

Pumping tests are one of the most commonly used in situ testing techniques for assessing aquifer hydraulic properties. Numerous researches have been conducted to predict the effects of aquifer heterogeneity on the groundwater levels during pumping tests. The objectives of the present work were as follows: (1) to predict drawdown conditions and to estimate aquifer properties during pumping tests undertaken in radially symmetric heterogeneous aquifers, and (2) to identify a method for assessing the transmissivity field along the radial coordinate in radially symmetric and fully heterogeneous transmissivity fields. The first objective was achieved by expanding an existing analytical drawdown formulation that was valid for a radially symmetric confined aquifer with two concentric zones around the pumping well to an N concentric zone confined aquifer having a constant transmissivity value within each zone. The formulation was evaluated for aquifers with three and four concentric zones to assess the effects of the transmissivity field on the drawdown conditions. The specific conditions under which aquifer properties could be identified using traditional methods of analysis were also evaluated. The second objective was achieved by implementing the inverse solution algorithm (ISA), which was developed for petroleum reservoirs to groundwater aquifer settings. The results showed that the drawdown values are influenced by a volumetric integral of a weighting function and the transmissivity field within the cone of depression. The weighting function migrates in tandem with the expanding cone of depression. The ability of the ISA to predict radially symmetric and log‐normally distributed transmissivity fields was assessed against analytical and numerical benchmarks. The results of this investigation indicated that the ISA method is a viable technique for evaluating the radial transmissivity variations of heterogeneous aquifer settings. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Simplified analytical solution for point load acting behind a cantilever wall     

George Maurice Iskander 《国际地质力学数值与分析法杂志》2012,36(3):344-351

The analysis of earth pressure resulting from an applied point load behind a retaining wall is to be carried out in three dimensions as the earth pressure distribution varies both in vertical and horizontal directions. In this research, the semi‐empirical expressions developed by Terzaghi [Trans. ASCE 1954; 119 ] for earth pressure due to point load are integrated and a correction factor is introduced to develop equivalent equations for two‐dimensional analyses. A new parameter referred to as the design width, which is the horizontal distance retained by the individual vertical retaining element is introduced. The used procedure and the resulted equations are tested and verified by adopting different design width values covering the practical range. The resulted equations together with the semi‐empirical expressions of earth pressure due to line load developed by Terzaghi [Trans. ASCE 1954; 119 ] can be easily used for two‐dimensional analysis of the effect of point load. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Prediction of rock alteration patterns: A potential tool in mineral exploration     

R. Freij-Ayoub  J. L. Walshe  H-B. Muhlhaus 《Australian Journal of Earth Sciences》2013,60(5):885-894

Hydrothermal alteration of a quartz‐K‐feldspar rock is simulated numerically by coupling fluid flow and chemical reactions. Introduction of CO₂ gas generates an acidic fluid and produces secondary quartz, muscovite and/or pyrophyllite at constant temperature and pressure of 300°C and 200 MPa. The precipitation and/or dissolution of the secondary minerals is controlled by either mass‐action relations or rate laws. In our simulations the mass of the primary elements are conserved and the mass‐balance equations are solved sequentially using an implicit scheme in a finite‐element code. The pore‐fluid velocity is assumed to be constant. The change of rock volume due to the dissolution or precipitation of the minerals, which is directly related to their molar volume, is taken into account. Feedback into the rock porosity and the reaction rates is included in the model. The model produces zones of pyrophyllite quartz and muscovite due to the dissolution of K‐feldspar. Our model simulates, in a simplified way, the acid‐induced alteration assemblages observed in various guises in many significant mineral deposits. The particular aluminosilicate minerals produced in these experiments are associated with the gold deposits of the Witwatersrand Basin.  相似文献   

On finite volume method implementation of poro‐elasto‐plasticity soil model          下载免费PDF全文

Philip Cardiff 《国际地质力学数值与分析法杂志》2015,39(13):1410-1430

Accurate prediction of the interactions between the nonlinear soil skeleton and the pore fluid under loading plays a vital role in many geotechnical applications. It is therefore important to develop a numerical method that can effectively capture this nonlinear soil‐pore fluid coupling effect. This paper presents the implementation of a new finite volume method code of poro‐elasto‐plasticity soil model. The model is formulated on the basis of Biot's consolidation theory and combined with a perfect plasticity Mohr‐Coulomb constitutive relation. The governing equation system is discretized in a segregated manner, namely, those conventional linear and uncoupled terms are treated implicitly, while those nonlinear and coupled terms are treated explicitly by using any available values from previous time or iteration step. The implicit–explicit discretization leads to a linearized and decoupled algebraic system, which is solved using the fixed‐point iteration method. Upon the convergence of the iterative method, fully nonlinear coupled solutions are obtained. Also explored in this paper is the special way of treating traction boundary in finite volume method compared with FEM. Finally, three numerical test cases are simulated to verify the implementation procedure. It is shown in the simulation results that the implemented solver is capable of and efficient at predicting reasonable soil responses with pore pressure coupling under different loading situations. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

悬乳体进样-电感耦合等离子体质谱法测定油菜籽中的毒性低温元素砷锑镉铊     

董淑霞  谢宁宁  韩继庆  熊俊彪  吴少尉 《岩矿测试》2022,(3):364-373

油菜籽品质及重金属污染程度直接关系到人类健康,对油菜籽中As、Sb、Cd和Tl等有毒元素含量进行监测有助于对食用油生产原材料的提前监控。避开强酸消解前处理的繁琐,为了实现快速测定菜籽中As、Sb、Cd和Tl等易挥发有毒元素的准确含量,以及解决粮油食品脂肪含量高对前处理的挑战,本文采用一种悬浮-乳化协同制样技术,详细考察了影响悬浮-乳化的诸多条件,制得均匀稳定的悬浮-乳化试液(Slurry-Emulsion Solution, SES)体系。在进样效率高的电热蒸发器(ETV)中,优化程序升温参数和改进剂硝酸钯的用量,SES直接进样,采用电感耦合等离子体质谱(ICP-MS)测定了油菜籽中As、Sb、Cd和Tl。该方法对As、Sb、Cd和Tl的相对标准偏差(RSD)分别为10.1%、8.8%、8.9%、6.4%[c=0.5%(m/V),n=5]。在最佳实验条件下,As、Sb、Cd和Tl检出限(3σ)分别为40.0ng/L、20.0ng/L、50.0ng/L和10.0ng/L,对应原始固体样品的检出限(3σ)分别为8.0ng/g、4.0ng/g、10.0ng/g和2.0ng/g。菜籽样品中As...  相似文献   

基于相似性原理超固结土不排水扩张半解析解     

李镜培  刘耕云  周攀 《岩土力学》2022,43(3):582-590

在实际工程中,土体往往因卸载、再加载等复杂应力路径而处于超固结状态,而现有的圆孔扩张问题的计算模型往往不能反映超固结土中剪胀、软化等一些特殊性质。为了解决这一问题,基于相似性原理和统一硬化（UH）模型,结合相关联的流动法则和大变形理论,采用相似求解技术求解了超固结土不排水扩张问题的半解析解答。通过理想化算例分析了圆孔扩张挤土产生的应力和孔压响应,并通过分析不同超固结比OCR的土体应力路径的变化规律,讨论了UH模型的适用性。结果表明：对于轻超固结土,空腔周围土体孔压在塑性区沿径向单调递减,随着OCR增大,塑性区内孔压分布呈现出“S”形的趋势,孔壁附近的孔压逐渐减小,孔壁周围甚至出现负孔压。随着OCR增大,压力?扩张曲线收敛变慢。在扩孔过程中正常固结土一直处于剪缩硬化阶段。而对于超固结土,土体则经历了临界状态→剪胀硬化阶段→临界（特征）状态→剪缩硬化阶段。该研究成果不仅丰富了相似求解技术的应用,而且为超固结土中桩基承载力、隧道围岩变形预测和原位测试参数等岩土工程问题的计算提供了理论依据。  相似文献   

中深层套管换热器短期无干扰名义取热量计算解析方法     

汤昌福  罗万静  黄骏玮 《现代地质》2022,36(5):1440-1446

从地下传热基本原理出发,考虑地温梯度影响,建立了中深层套管换热器进出口流体平均温度解析解和长时间近似解,推导了中深层套管换热器短期无干扰名义取热量计算解析公式,并通过与文献中结果对比进行了验证。研究结果表明,中深层套管换热器短期无干扰名义取热量是地温梯度的线性函数。短期无干扰名义取热量计算解析公式简单实用,可以实现中深层套管换热器短期换热性能快速评价。  相似文献   

U-Pb Geochronology and Geochemistry of Stratiform Garnet from the Aqishan Pb-Zn Deposit, Eastern Tianshan, Xinjiang, NW China: Constraints on Genesis of the Deposit     

WEN Bin  ZHANG Yuanhou  YANG Wanzhi  DU Shangze  WANG Peng  LIU Jinwei  CHEN Lei 《《地质学报》英文版》2022,96(1):135-146

The Aqishan lead-zinc deposit,located in the Jueluotag metallogenic belt of eastern Tianshan,Xinjiang,Northwest China,has a stratiform occurrence in the marine volcanic tuff of the Yamansu Formation.The ore body has a typical double-layer structure,having a stratified,stratoid,lenticular upper part and a veined,stockwork-like lower part.The occurrence of the upper orebody is consistent with that of the volcanic tuff wall rock.The ore minerals are mainly chalcopyrite,pyrite,sphalerite,galena and magnetite,the altered minerals mainly being silicified,such as sericite,chlorite,epidote,garnet.The garnetized skarn,being stratiform and stratoid,is closely related to the upper part of the orebody.Geological observations show that the limestone in the ore-bearing Yamansu Formation is not marbleized and skarnized.Spatially,it is associated with the ferromanganese deposits in the marine volcanic rocks of the Yamansu Formation.These geological features reflect the likelihood that the Aqishan lead-zinc deposit is a hydrothermal exhalation sedimentary deposit.The results from the EPMA show that the garnet is mainly composed of grossular-andradite series,contents being in a range of 34.791-37.8%SiO₂,32.493-34.274%CaO,8.454-27.275%FeO,0.012-15.293%Al₂O₃,0.351-1.413%MnO,and lower values of 0.013-1.057%TiO₂.The content of SiO₂ vs.CaO and FeO vs.Al₂O₃ has a significant positive correlation.The results of ICP-MS analysis for the garnet show that the REE pattern is oblique to right in general.The total amount of rare earth elements is relatively low,ΣREE=71.045-826.52 ppm,which is relatively enriched for LREE and depleted for HREE.LREE/HREE=8.66-4157.75,La_N/Yb_N=23.51-984.34,with obvious positive Eu and Ce anomalies(δEu=2.27-76.15,δCe=0.94-1.85).This result is similar to the REE characteristics of ore-bearing rhyolite volcanic rocks,showing that the garnet was formed in an oxidizing environment and affected by clear hydrothermal activity.The U-Pb isotopic dating of garnet by fs-LA-HR-ICP-MS gives an age of 316.3±4.4 Ma(MSWD=1.4),which is consistent with the formation time of the Yamansu Formation.According to the study of deposit characteristics and geochemical characteristics,this study concludes that the Aqishan lead-zinc deposit is a hydrothermal exhalation sedimentary deposit,the garnet being caused by hydrothermal exhalative sedimentation.  相似文献   

桂北龙胜上朗变镁铁质岩锆石UPb年龄及其地质意义     

秦亚  冯佐海  万磊  吴疆  吴杰  邢全力  薛云峰 《吉林大学学报(地球科学版)》2022,52(1):109-133

本文采用LAICPMS锆石UPb测年对桂北龙胜地区上朗变镁铁质岩进行年代学研究。2件年代学样品给出近乎一致的年龄信息,集中在(114.8±1.6)、(152.0±5.0)、(213.9±3.5)、(274.6±9.4)、(442.5±6.7)、(553.5±9.2)、(774.2±5.9)和(822.0±10.0) Ma等8个年龄峰值。锆石成因类型研究表明,(774.2±5.9) Ma锆石为样品中最年轻的岩浆锆石,代表上朗变镁铁质岩的侵位时代。UPb年龄大于(822.0±10.0) Ma的锆石为捕获锆石,代表岩浆侵位过程中捕获物质的时代。(114.8±1.6)、(152.0±5.0)、(213.9±3.5)、(274.6±9.4)、(442.5±6.7)和(553.5±9.2) Ma为热液锆石年龄,代表变镁铁质岩成岩后遭受后期构造热事件影响的时限。其中,(442.5±6.7) Ma代表寿城—三门断裂韧性变形的时代,与区域NNE向韧性断裂的变形时代一致。而小于(442.5±6.7) Ma的热液锆石年龄,表明岩石韧性变形后遭受多期构造热事件的影响。泛非期(553.5±9.2) Ma热液锆石的存在,表明华南大陆曾受泛非构造热事件的影响,应具有冈瓦纳大陆的亲缘性。  相似文献   

四川盆地东部茅口组白云岩成因: 来自岩石学、矿物学和地球化学的证据^*          下载免费PDF全文

王良军  李红  曾韬  柳益群  潘磊  李让彬  李文厚  张冬冬  焦鑫  杨康  董杨坤 《古地理学报》2022,24(5):989-1016

四川盆地中二叠统茅口组白云岩中蕴藏丰富的天然气资源,但是这套白云岩的成因多年来一直存在争议。盆地东部茅口组白云岩储集层多发育在茅三段中下部,纵向上厚度介于3.0~46.8 m之间,平面上沿北西—南东向基底断裂呈带状展布。野外和钻井岩心观察发现,白云岩内发育交织状张性裂缝,将岩石切割呈角砾状,裂缝多被粗晶方解石、白云石充填或半充填。根据围岩和裂缝中白云石晶体形貌和产出状态,在显微镜下识别出4类不同组构的白云石: 第1类为灰泥基质中“星散状”自形粉晶—细晶白云石; 第2类为半自形面状组构细晶白云石,呈他形—半自形镶嵌状; 第3类为具“雾心亮边”的自形晶面状组构细晶—粗晶白云石,具糖粒状结构,晶间孔隙发育; 第4类为脉体充填的粗晶鞍状双晶白云石。背散射照片显示前3类白云石的“雾心”部分晶面混浊、表面分布方解石残斑及微孔, 而第3类白云石的“亮边”部分与第4类鞍状粗晶白云石脉则晶体明亮、洁净、致密,属新生矿物。上述4类白云石的成分均具有富Ca和贫Fe、Mn、Sr的特点,MgO含量变化较大,其中前两类白云石MgO含量总体低于白云石标准计量,而后两类白云石的MgO含量则接近或略高于标准计量。岩石学、矿物学和地球化学特征表明:茅口组白云岩主要经历了2期白云化作用,初次白云化作用形成第1类、第2类白云石及“雾心”白云石,二次白云化作用形成“亮边”白云石和粗晶白云石脉体; 2期白云化作用均发生得很早,可能始于同沉积期至浅埋藏期。白云石原位微量元素和原位锶同位素分析表明,白云化作用流体具有混源的特点,流体可能由富Ca地下水以及与火山活动有关的热液混合而成。推测中二叠世末期峨眉山地幔柱的喷发引起四川盆地内基底断裂再次活动,造成茅口组内张性构造裂缝发育,这为白云化流体混合及运移提供了通道。  相似文献