Differences Between Mode I and Mode II Crack Propagation     

K. B. Broberg 《Pure and Applied Geophysics》2006,163(9):1867-1879

Although mode I and mode II crack propagation show many similarities, in particular when analysed by linear elastic fracture mechanics, they differ significantly in the micro-structural behaviour. These differences, which are clearly noticeable in the fracture surface morphology, lead to fundamental differences in the macroscopic behaviour. Thus, mode II crack expansion under remote loading, appears to obey micro-structural scaling laws, implying that the dimensions of the process region stay essentially constant during crack expansion, rather than increasing with crack length. Therefore, expanding mode II cracks can almost reach the Rayleigh velocity, and actually also intersonic velocities. An expanding mode I crack, on the other hand, seems to obey continuum scaling laws, implying that the dimensions of the process region increase in proportion to crack length, leading to self-similar crack expansion at a velocity significantly below the Rayleigh speed and dependent on the remote load.  相似文献   

水下收缩裂隙形成过程及裂缝充填模式研究     

赵振宇  周瑶琪  马晓鸣  冀国盛 《地学前缘》2007,14(4):215-221

通过野外实地考察测试,对水下收缩裂隙整体形成过程、裂隙内充填物沉积模式、影响因素等进行了详细讨论,并且建立了相应的地质理论模型。水下收缩裂隙的形成共分4个阶段,依次为:泥水混合物进入低洼地带的初始混浊状态;沉积压实稳定阶段;水位线下降,盐度增大,裂隙形成阶段;沉积裂隙充填阶段。其中“异常高压作用”,对于初始裂隙的形成、沉积物孔隙水的有效排出以及主要渗流通道的发育起到了重要作用。单一泥质地层裂隙内充填物沉积模式与沙泥互层的多旋回地层略有差异,主要表现为沙层的润滑作用以及对早期裂隙内充填物类型的影响。上述两种地层裂隙内充填物沉积特征均与后期充注期次相对应,表现出很好的韵律性。裂隙纵剖面中生物发育层的出现,对裂隙内充填物的物理、化学性质将产生重要影响。  相似文献   

工程结构三维疲劳裂纹最大应力强度因子计算   总被引：1，自引：2，他引：1  

瞿伟廉  鲁丽君  李明 《地震工程与工程振动》2007,27(6):58-63

介绍了裂纹的类型、裂纹尖端应力场的奇异性。以一维问题为例,推导论证了奇异单元能够很好的反映裂纹尖端应力场的奇异性。应力强度因子一般表达式表明应力强度因子与载荷呈线性关系,并依赖于物体和裂纹的几何形状和尺寸。本文借助大型通用有限元软件ANSYS,采用位移外插法计算了三维表面裂纹前沿不同位置处的应力强度因子,并与《应力强度因子手册》基于实验的理论公式计算结果相比较。结果表明:有限元结果与理论解误差较小,裂纹最深处应力强度因子最大。  相似文献   

“醉汉林”作为滑坡和边坡变形特征标志的意义——以陕西陇县地区为例     

李东林吴树仁  张春山刘鑫 《地质通报》2007,26(5):613-619

“醉汉林”一般被当做滑坡存在的一种标志。在陕西宝鸡地区进行地质灾害详细调查的过程中,发现变形边坡也有“醉汉林”分布。对陕西陇县郭家庄变形边坡“醉汉林”的树木倾斜角与边坡的倾角进行了测量,并结合几何学分析,认为树木倾斜角反映了边坡倾角的变化,并得出边坡倾角不断变陡是该地区边坡变形的一种主要方式的结论。研究结果表明,“醉汉林”有着多样而具体的指示意义:“醉汉林”记录了边坡变形的历史,可以作为区分滑坡与变形边坡的标志,“醉汉林”可以指示滑坡及边坡的状态,还可以判断滑坡剪出口是否存在。  相似文献   

根据含超压气体裂隙震源模式讨论P波初动符号的分布   总被引：1，自引：1，他引：0  

王智培 《地震工程学报》1998,20(1):14-20

利用含超压气体裂隙震源模式［１］分析研究了Ｐ波初动符号的分布．根据理论推导,不同倾角含超压气体裂隙可分别形成Ｐ波初动符号的四象限分布图象和圆、椭圆、抛物线、双曲线等圆锥曲线形Ｐ波节线．按节线形状和失稳方式进行了地震分类．所推论的初动Ｐ波、Ｓ波振幅分布规律和地形变特征都与实际相符  相似文献   

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application     

J. M. Segura  I. Carol 《国际地质力学数值与分析法杂志》2008,32(18):2103-2123

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

A Global Reliability Assessment Method on Aging Offshore Platforms with Corrosion and Cracks     

嵇春艳  李珊珊  陈明璐 《中国海洋工程》2009,23(2):199-210

Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms. For the rational estimation of the safety levels of aging platforms, a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper. The base shear capacity is taken as the global ultimate strength of the offshore platforms. It is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagati...  相似文献   

DEM analyses of crack propagation in flawed rock mass under uniaxial compressionEI北大核心CSCD     

Jiang Ming-jing  Zhang Ning  Shen Zhi-fu  Chen He 《岩土力学》2015,(11):3293-+

A contact model for rock is established and imbedded into a DEM software by summarizing the bond granule tests. DEM simulation of uniaxial compression test on the pre-cracked Lac du Bonnet granite is performed, and then stress distributions are further analyzed and compared with the theoretical results. Different fracture criteria are employed to predict the crack initiation angles that are compared with theoretical ones. The results show that the failure modes obtained from DEM simulation are similar to experimental results, and stress distributions in DEM simulation are qualitatively similar to theoretical values. When the angle of pre-crack is small, the lateral stresses are compressive and tensile. The compressive strains concentrate at two edges, resulting in the tensile strains in the up-and downward cracks. When the angle of the pre-crack is large enough, the stress concentration is unobvious, leading to a discrepancy between the DEM and theoretical results. The crack extension angle resulting from uniaxial compression measured from DEM tests are in good agreement with those acquired from experimental tests. These angles are consistent with theoretical predictions by the maximum circumferential stress criterion and the maximum energy release rate criterion.  相似文献   

基于高清工业相机的盾构隧道裂缝智能识别算法分析     

李梓豪  唐超 《测绘通报》2021,(8):83-87,101

裂缝一直是隧道病害的重点检测对象,但传统人工巡检仅能通过肉眼发现后记录,人工识别精准度与效率完全取决于个人经验判断,无信息化手段辅助,作业效率识别精度亟待提升。针对以上问题,本文借助高清工业相机成像分辨率高、采集速度快等特点,将高清工业相机部署于轨道车上获取隧道表面裂缝病害信息,大幅提高了隧道裂缝识别效率,将识别精度提升至0.2 mm,同时融入优化的Cascade R-CNN算法,在有监督情况下训练隧道裂缝样本,最终实现了隧道裂缝病害的高效提取,同时研发了一套包含硬件数据采集、数据处理软件、数据管理平台的裂缝病害识别路线,真正意义上破除了识别慢、精度低、靠经验、难管理的技术壁垒。  相似文献   

An approach to determining the thicknesses of shear bands with an echelon‐crack structure     

G. S. Wang  L. W. Kong  C. F. Wei 《国际地质力学数值与分析法杂志》2013,37(6):618-640

In this paper, the internal structure of shear band is investigated, and a model of the shear band with an echelon crack structure is developed. The model assumes the shear band to be composed of two conjugate sets of echelon cracks, such that the smaller echelon cracks are embedded in the space of the larger ones. The additional strain induced by the echelon cracks and the anisotropic development of the compliance tensor in the shear band zone are analyzed. The critical crack density at the onset of shear band is obtained by applying the bifurcation condition. Deviating from previous approaches, the new procedure evaluates the thickness of shear band based on the geometrical characteristics of echelon crack arrays and the failure probability of grain boundaries in the longitudinal direction at the onset of shear band. Parametric analysis shows that grain size, internal friction angle, dilation angle, and failure probability of grain boundaries are the dominant factors that account for the shear band thickness. The calculated results are consistent with the experimental data available in the literature. The model soundly explains that the measurements of the shear band thickness are generally scattered, ranging from 4 to 30 (or even more) times the grain size. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献