Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies     

L. A. Morgan  W. C. Shanks  III  D. A. Lovalvo  S. Y. Johnson  W. J. Stephenson  K. L. Pierce  S. S. Harlan  C. A. Finn  G. Lee  M. Webring  B. Schulze  J. Dühn  R. Sweeney  L. Balistrieri 《Journal of Volcanology and Geothermal Research》2003,122(3-4):221-242

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.  相似文献   

浙江桐庐晚奥陶世晚期沉积层序和沉积环境分析   总被引：3，自引：0，他引：3  

范代读  李从先  蔡进功  邓兵  罗璋 《沉积学报》2003,21(2):247-254

文昌组上段顶部是一套潮汐层理非常发育的泥质砂岩或砂质泥岩,存在双向交错层理,层面有雨痕,应为潮坪沉积。潮坪沉积由小型层序构成,小型层序又是由砂、泥质单层组成。砂质单层底部通常为岩性突变面或侵蚀面,砂质纹层较厚,其中可见对称波痕或泥砾;向上砂质纹层变薄,过渡到泥质单层。砂质单层形成于暴风浪时期,泥质单层是风浪衰减后恢复正常的潮汐沉积。因此,小型层序从成因上说是一风暴层序。碎屑成份、砾石成份分析表明沉积物均来自华夏古陆的沉积岩和变质岩基底。物源一致,岩层产状变化不大,反映文昌组沉积环境稳定。岩性、粒度分析表明文昌组是一向上变细、由浅海高能环境向近岸低能环境过渡的沉积层序。文昌组下段为浅海砂岩沉积,上段顶部为潮坪沉积。二者之间是一套夹砾岩透镜体的泥质粉细砂岩,其沉积环境应介于浅海和滨岸之间,为水下岸坡沉积。砾岩层只是大的沉积旋回中出现的事件性水下冲积物。  相似文献   

鄱阳湖组(第四系)的修订及特征   总被引：3，自引：0，他引：3  

马振兴  蒋玉珍  魏源  李均辉  李长安 《地层学杂志》2003,27(3):212-215

根据对鄱阳湖地区 Zk0 1钻孔柱状剖面的研究 ,对鄱阳湖组的定义进行修订、补充 ,认为鄱阳湖组为一套以青灰色淤泥质粘土、黄褐色粘土、粉质粉土为主夹少量粉砂或细砂的湖泊—河口三角洲相沉积。年代地层为第四系全新统 ,底界年龄约 6 2 10± 12 5 a B.P.,开阔湖泊沉积始于 32 4 0± 180 a B.P.,且由北向南时代渐新 ,具有明显的穿时性  相似文献   

Lithology and palynology of Neogene sediments on the narrow edge of the Kitakami Massif (basement rocks), northeast Japan: Significant change for depositional environments as a result of plate tectonics     

Koji Yagishita  Akiko Obuse  Hiroshi Kurita 《Island Arc》2003,12(3):268-280

Abstract A controversial stratigraphic section, the Taneichi Formation, is exposed along the Pacific Coast of northeastern Honshu, the main island of the Japanese Archipelago. Although most sediments of the formation have long been dated as late Cretaceous, the northern section of it has been assigned to (i) the Upper Cretaceous; (ii) the Paleogene; or (iii) the Neogene. In the present report, we present the data of palynological and sedimentological studies, showing that the northern section should be assigned to the Neogene. A more important point in the present study is that we invoke some basic principles of fluvial sedimentology to resolve this stratigraphic subject. The lignite layers full of Paleogene–Miocene dinoflagellate cysts and pollen assemblages drape over the boulder‐sized (>40 cm in diameter) clasts in the northern section. However, the layers totally consist of aggregates of small lignite chips, indicating that the lignites are allochthonous materials. The mega‐clasts with derived microfossils in the lignites are thought to have been deposited as Neogene fluvial (flood) sediments in the newly formed Japanese Archipelago. Prior to the Miocene, the northern Honshu was part of the Eurasian Plate, thus the boulder‐sized clasts cannot be envisaged as long river flood deposits along the continental Paleogene Pacific Coast. Instead, the mega‐clasts with the draping lignites were probably derived from nearby Miocene highlands in the newly born island arc.  相似文献   

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China   总被引：2，自引：0，他引：2  

陈多福  陈先沛  陈光谦 《中国科学D辑(英文版)》2003,46(Z1)

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.  相似文献   

易门式大型铜矿床构造成矿动力学模型   总被引：5，自引：1，他引：5  

韩润生  刘丛强  马德云  王红才  马更生 《地质科学》2003,38(2):200-213

针对金属矿床隐伏矿定位预测的关键问题,在提出构造成矿动力学的分支学术方向的基础上,以易门式大型铜矿床为例,从成矿地质背景、矿田构造、构造地球化学和成矿构造应力场等方面进行构造成矿动力学研究,阐述在构造应力场控制下成矿流体运移和聚集的规律。构造地球化学研究认为,构造地球化学异常反映矿体的原生晕;构造地球化学异常受构造控制,其分带特征可指示成矿流体的流向,并提供矿床成因和隐伏矿(化)体相对埋深的信息。构造应力场的控矿特征主要表现在:构造应力场导致控矿构造的形成,并驱动成矿流体的运移;构造应力场控制了成矿能量场;应力和能量的高值集中区分布特点可反映某些构造型式。在此基础上建立构造成矿动力学模型,概括隐伏矿成矿预测准则,据此提出若干重点找矿靶区和靶位,其中部分靶区得到工程验证,表明构造成矿动力学方法对隐伏矿定位预测和评价具有重要的指导意义。  相似文献   

诸广—贵东大型铀矿聚集区富铀矿成矿地质条件   总被引：22，自引：2，他引：22  

邓平舒良树  谭正中 《地质论评》2003,49(5):486-494

位于南岭中部的诸广—贵东地区是中国花岗岩型铀矿最为重要的大型矿聚集区，已发现数个花岗岩型铀矿田，发育有数十个铀矿床，它们主要集中分布在诸广岩体南部和贵东岩体东部。区内富铀矿的形成与富铀古陆块、深部构造环境、幔涌区强烈深源岩浆活动、挤压向拉伸转变的构造环境、富铀沉积建造及富铀岩体、多期次热液蚀变叠加、高低差异的放射性元素迁移、良好的还原条件和封闭环境等区域地质背景和条件有着十分密切的关系。富铀矿在诸广、贵东两岩体内的集中分布和一系列有利于铀成矿的良好地质背景表明，该区乃至整个南岭范围地质背景相似的地区是铀成矿的有利地区，仍存在着寻找隐伏富大铀矿的巨大潜力。  相似文献   

Evolution and inheritance of a rock coast: western Galicia,northwestern Spain     

R. Blanco Chao  M. Costa Casais  A. Martínez Cortizas  A. Prez Alberti  A. S. Trenhaile 《地球表面变化过程与地形》2003,28(7):757-775

There is increasing evidence that shore platforms and other elements of rock coasts may be inherited, at least in part, from interglacial stages when sea level was similar to today's. Most of this evidence, which includes ancient beaches and datable terrestrial deposits, has been obtained from areas of resistant, slowly eroding rock, where the platforms often appear to be much too wide to have developed since the sea reached its present level. It is much more dif?cult to demonstrate that inheritance has occurred in areas of weaker rock, which generally lack any datable material. The coast of western Galicia in northwestern Spain has shore platforms in igneous and metamorphic rocks that were deeply weathered during the Tertiary. These platforms are closely associated with ancient beaches from the last interglacial stage, and associated periglacial and ?uvio‐nival deposits that covered and fossilized most of the Eemian platforms and cliffs during the late middle and late Weichselian glacial stage. The sedimentary processes and the thickness and facies of the sediments were determined by the height, aspect and gradient of the coastal mountains, and their distance from the coast. Radiocarbon dating, sedimentary analysis and platform morphology indicate that the shore platforms of Galicia have been inherited from at least the last interglacial stage. They were fossilized in places beneath thick Weichselian deposits and then exhumed during the Holocene transgression. The abundant evidence for inheritance in Galicia has important implications for other coasts in fairly weak rocks where such evidence is generally lacking. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand   总被引：1，自引：0，他引：1  

Timothy R. H. Davies  Chris C. Smart  Jill M. Turnbull 《地球表面变化过程与地形》2003,28(10):1081-1096

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada     

Carl L. Amos  Ian G. Droppo  Eduardo A. Gomez  Tom P. Murphy 《Sedimentology》2003,50(1):149-168

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.  相似文献