Analysis of Safe Span Length and Fatigue Life of Submarine Pipelines     

HE Zhang-feng  WEI Yuan  LIU Shu-lin 《中国海洋工程》2020,(1):119-130

Owing to the complex environmental conditions, suspension could induce complicated forces on submarine pipelines and even cause vortex-induced vibration, resulting in fatigue damage of pipelines. Through aiming at the 28-inch submarine pipeline in the East China Sea, the pipeline was segmented according to the similarity, considering the factors of pipe assembly, typhoon, current, wave and seabed topography. The effects of span length on natural frequency in each section of submarine pipeline were analyzed by finite element model. The maximum safe span length allowed by each pipeline section was verified by fatigue cumulative damage theory, and the fatigue life of each pipeline section were predicted. The results showed that each order natural frequency of the pipeline decreased with the increase of span length. The calculated results of empirical formulas were much smaller than those of the FEM analysis. The increase of the gap between the suspended pipeline and the seabed was beneficial to enhance the fatigue life of the suspended pipeline.  相似文献   

Site characterization model using least‐square support vector machine and relevance vector machine based on corrected SPT data (Nc)     

Pijush Samui  T. G. Sitharam 《国际地质力学数值与分析法杂志》2010,34(7):755-770

Statistical learning algorithms provide a viable framework for geotechnical engineering modeling. This paper describes two statistical learning algorithms applied for site characterization modeling based on standard penetration test (SPT) data. More than 2700 field SPT values (N) have been collected from 766 boreholes spread over an area of 220 sqkm area in Bangalore. To get N corrected value (N_c), N values have been corrected (N_c) for different parameters such as overburden stress, size of borehole, type of sampler, length of connecting rod, etc. In three‐dimensional site characterization model, the function N_c=N_c (X, Y, Z), where X, Y and Z are the coordinates of a point corresponding to N_c value, is to be approximated in which N_c value at any half‐space point in Bangalore can be determined. The first algorithm uses least‐square support vector machine (LSSVM), which is related to a ridge regression type of support vector machine. The second algorithm uses relevance vector machine (RVM), which combines the strengths of kernel‐based methods and Bayesian theory to establish the relationships between a set of input vectors and a desired output. The paper also presents the comparative study between the developed LSSVM and RVM model for site characterization. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

基于CityEngine的三维城市规划设计与研究     

李宏旭  杨李东 《测绘与空间地理信息》2016,(5):55-57

城市规划领域越来越需要三维建模技术的支持。CityEngine作为一种新型的三维建模软件,不仅可以批量生成规划模型,还可以用来辅助三维城市规划设计。本文基于CityEngine规则建模方法,实现了规划方案对比、建筑体量调整、规划指标计算等功能,通过对某小区进行实际建模验证,证明了CityEngine可以为城市规划者们提供新的思路,为城市设计和城市管理提供决策支持。  相似文献   

松辽盆地大陆科钻二开段大井眼钻井液技术     

郑文龙 《地质与勘探》2016,52(5):931-936

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。  相似文献   

豫西地区雷暴预警预报系统构建方法研究     

李振锋  付伟基  陈红霞 《气象与环境科学》2016,39(4):126-134

目前,基层台站在雷暴预警预报中主要依赖传统经验预报方法,而对卫星云图、大气电场、多普勒雷达回波和高分辨率数值预报产品等资料释用水平不高,存在主观定性分析多、客观定量计算少等不足。依托现有气象资料和雷暴预报方法,以雷暴预警预报系统构建为目标,从气象数据仓库构建、支持向量机雷暴预报、相似预报雷暴预报、Poor Man集合预报技术和多源数据融合分析等方面,探讨了雷暴预警预报系统构建方法,实现了雷暴中期预测、短期预报和短时临近预警三个层次的预报功能,解决了气象资料庞杂难以管理、数值预报产品释用水平不高、数值预报结果存在"跃变"、多源数据融合分析缺乏手段等问题,提高了基层台站雷暴预报工作效率和预报水平,同时也为其他地区类似系统构建提供了参考。  相似文献   

支持向量机的车载雷达点云目标识别     

李海亭  王厚之  李艳红  汪汇兵 《测绘科学》2016,41(5):45-49

为了进一步研究移动测量系统的数据处理问题,该文根据点云的基本特征,归纳了由7个特征构成的点云原始特征向量,在此基础上,结合语义环境构建了由17个特征构成的点云扩展特征向量,并采用支持向量机模型对车载LiDAR点云进行行道树点云识别的一系列实验。实验中采用粒子群优化算法和遗传算法对支持向量机进行参数寻优;采用不同特征向量和不同数目样本对点云进行学习和目标识别;分析了特征向量的学习曲线和识别精度。实验结果表明,支持向量机模型能够在行道树点云识别中取得较高的精度。  相似文献   

一种裸露土壤湿度反演方法   总被引：1，自引：0，他引：1  

张清河  徐飞  朱国强 《测绘科学》2016,41(2):11-14

针对目前土壤湿度反演方法研究较少且缺少实时性的现状,该文提出一种土壤湿度反演方法——最小二乘支持向量机技术。以积分方程模型为正向算法,数值模拟不同雷达参数(频率、入射角及极化)下后向散射系数随土壤含水量和地表粗糙度的变化情况。经过数据敏感性分析,选取C-波段和X-波段、小入射角下的同极化后向散射系数作为支持向量回归的训练样本信息;经过适当的训练,利用支持向量回归技术对土壤含水量进行了反演研究;并考虑通过多频率、多极化、多入射角数据的组合,消除地表粗糙度的影响,提高反演精度。模拟结果表明,该方法反演土壤湿度具有较高的精度和较好的实时性;同时,与人工神经网络方法的结果比较,证明了该方法的有效性,为土壤湿度的反演研究提供了一种方法。  相似文献   

混合核特征加权SVM遥感湿地空间分类     

刘冰  吴超  林怡 《测绘工程》2016,25(7):13-17

针对湿地空间信息的复杂性和SVM的分类性能,设计一种基于混合核函数的特征加权SVM分类模型,综合利用多种特征信息,避免被弱相关特征所支配,从而提供更佳的映射性能和泛化能力。实验结果表明,该分类模型兼具良好的外推和内推能力,能够有效地融合不同信息源特征,得到更完整和准确的分类结果,在总体精度、Kappa系数等多项指标上都表现出更高的水平。  相似文献   

改进支持向量机的高分遥感影像道路提取   总被引：2，自引：0，他引：2  

朱恩泽  宋伟东  戴激光 《测绘科学》2016,41(12):224-228

针对支持向量机受分类数的限制在高分辨率遥感影像中无法直接获取高精度道路网信息的问题,该文提出一种新的混合的基于支持向量机的方法:首先,利用模糊C均值聚类方法将输入的遥感影像分为3类,以减少支持向量机的错分现象;其次,运用支持向量机将不同类别的像素分为道路类和非道路类;最后,应用马尔科夫随机场对分类结果进行噪声去除,并采用形态学进行后处理,进而得到精确道路网信息。实验结果表明:该算法不仅能够从高分辨率遥感影像中提取出道路网,而且精度优于直接使用支持向量机算法以及对比算法。  相似文献   

An open source GIS‐based Planning Support System: Application to the land use plan of La Troncal,Ecuador          下载免费PDF全文

Inés Santé  Natalia Pacurucu  Marcos Boullón  Andrés Manuel García  David Miranda 《Transactions in GIS》2016,20(6):976-990

Planning Support Systems (PSS) comprise a wide variety of geo‐technological tools related to GIS and spatial modeling aimed at addressing land planning processes. This article describes the OpenRules system, a PSS based on a previous system called RULES. Among OpenRules new features are its architecture, based exclusively on free and open source software, and its applicability to all land use types, including rural and urban uses. In addition, OpenRules incorporates an unlimited number of land evaluation factors and a new objective in land use spatial allocation. OpenRules has been programmed in Java and implemented as a module of the free GIS software gvSIG, with full integration between the GIS and the decision support tools. Decision support tools include multicriteria evaluation, multiobjective linear programming and heuristic techniques, which support three basic stages of land use planning processes, namely land suitability evaluation, land use area optimization and land use spatial allocation. The application of OpenRules to the region of La Troncal, Ecuador, demonstrates its capability to generate alternative and coherent solutions through a scientific and justified procedure at low cost in terms of time and resources.  相似文献