Effect of suction on the mechanical behaviour of iron ore rock   总被引：1，自引：0，他引：1  

Dragan Grgic  Richard Giot  Franoise Homand  Albert Giraud 《国际地质力学数值与分析法杂志》2005,29(8):789-827

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method          下载免费PDF全文

Mohammad Hossein Bazyar  Abbas Talebi 《国际地质力学数值与分析法杂志》2015,39(1):1-22

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

A smoothed cap model for variably saturated soils and its robust numerical implementation          下载免费PDF全文

P. Gamnitzer  G. Hofstetter 《国际地质力学数值与分析法杂志》2015,39(12):1276-1303

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

一种采用基础矩阵描述的核线影像生成方法     

崔瑞兵  靳国旺  张红敏  熊新  王罗刚 《测绘科学技术学报》2016,(3):295-300

设计了一种采用基础矩阵的立体像对核线影像制作方法,由基础矩阵来描述影像间的相对方位关系,避免了相对定向过程中复杂的迭代过程。通过稀疏匹配获取高精度的同名点,由基础矩阵确定每组同名点对应的同名核线,根据核线必相交于核点的原理,采用最小二乘法确定左右影像的核点坐标;然后根据核点坐标完成影像间核线的快速映射,沿核线方向采用双线性内插法进行核线重采样,完成核线影像制作。采用多组影像进行核线影像制作实验,对生成的核线影像进行同名特征点提取与匹配,结果表明采用该方法制作的核线影像上下视差较小,验证了方法的有效性。  相似文献   

2000～2015年会理县地表覆盖变化监测     

陈传华  陈阳  张云  李胜  李俊斌 《测绘与空间地理信息》2016,(11):110-114

以LandSat多时相影像为数据源,采用基于规则的面向对象分类方法,监测会理县2000～ 2015年地表覆盖变化.结合1∶50 000 DEM数据,分析了会理县地表覆盖构成与转移、变化动态度及潜在退耕地情况.监测分析结论能为会理县加强空间管制、促进土地资源集约利用、指导生态文明建设等提供决策信息支撑.  相似文献   

求解GM(1,1)模型新总体最小二乘算法     

陶武勇  鲁铁定  吴飞 《测绘科学技术学报》2016,(5):476-479

在GM(1,1)模型中系数矩阵和观测向量都是由原始序列组成的。系数矩阵中同样是有误差的,与观测向量中的误差一样,亦来源于原始序列,即它们误差同源。不同位置的相同元素应该有相同的改正数,采用传统总体最小二乘求解则不能达到此目的。针对这一缺陷,推导了一种新的总体最小二乘算法;并且通过算例验证了新方法的可行性和有效性。  相似文献   

国家地下水监测井建设关键问题研究          下载免费PDF全文

卢予北  李艺  陈莹  王建华  申云飞 《探矿工程》2016,43(6):1-6

国家地下水监测工程建设由国土资源部和水利部联合立项申报,历经10余年的可行性研究和评估论证,最终由国家发展和改革委员会批准实施。项目财政投资20多亿元,覆盖全国31个省、区、市及新疆建设兵团,涵盖了全国7大流域和16个重要水文地质单元,共布设20401个地下水监测站点。项目的组织实施意义重大,事关地质环境、饮水安全和经济社会的可持续发展等民生问题。其中,钻探工程决定着国家地下水监测工程建设的质量、运行效果及使用寿命。本文针对项目“地域分布广、施工战线长、地质条件复杂”等特点,从组织管理、钻井结构设计、成井管材和钻进工艺选择等方面的关键问题进行了分析研究,并提出了具体建议。  相似文献   

A new assessment model for evacuation vulnerability in urban areas     

Xiaoyi Ma  Ci Song  Chenghu Zhou 《International journal of geographical information science》2016,30(12):2401-2420

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.  相似文献   

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification          下载免费PDF全文

Zhen Li  Zhaochu Hu  Detlef Günther  Keqing Zong  Yongsheng Liu  Tao Luo  Wen Zhang  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(4):477-491

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.  相似文献   

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise          下载免费PDF全文

Phillip E. Warwick  Ian W. Croudace  Richard M. Marsh  Nicolas Baglan  Sang Bog Kim 《Geostandards and Geoanalytical Research》2018,42(2):253-262

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.  相似文献