Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses   总被引：1，自引：1，他引：0  

Wanlin Cao  Jianwei Zhang  Hongying Dong  Min Wang 《地震工程与工程振动(英文版)》2011,10(4):535-546

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube (CFT) columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens: a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear walls tested.  相似文献   

梅雨锋对引发暴雨的中尺度对流系统发生发展影响的研究   总被引：7，自引：1，他引：6  

赵玉春 《大气科学》2011,35(1):81-94

针对梅雨锋(湿度锋)上或附近偏南暖湿气流一侧中尺度对流系统不断发生发展和长时间维持而引发长江流域暴雨的观测事实,利用中尺度数值预报模式WRF(V3.1.1)设计了一系列三维理想数值试验,研究了梅雨锋两侧自身水汽差异效应,探讨了基本气流和风垂直切变对梅雨锋上中尺度对流系统发生发展的影响,揭示了梅雨锋对中尺度对流系统的组织...  相似文献   

2010年浙南地区一次暴雨过程诊断分析   总被引：4，自引：0，他引：4  

曹楚  王忠东 《气象与环境科学》2011,34(4):46-51

利用常规观测资料、中尺度自动站加密资料、多普勒雷达资料和NCEP1°×1°再兮析资料．对2010年5周8曲日发生在浙南的一次暴雨过程进行了诊断分析,结果发现：此次暴雨是在横槽转竖的大背景下,西风槽和高原槽东移合并加强,并在东移过程中与低层切变共同作用造成的;低空急流的形成在水汽的输送和聚集过程中发挥了重要作用;暴雨过程...  相似文献   

Shear strength of compacted soil: effects on splash erosion by single water drops   总被引：1，自引：0，他引：1  

L. Mouzai  M. Bouhadef 《地球表面变化过程与地形》2011,36(1):87-96

The persistence of soil compaction, caused by farmers' vehicles (tractors wheelings) during the dry season, can affect splash distribution and soil erosion so that surface flow starts at an earlier stage than between the wheelings. To investigate the effects of soil compaction on splash distribution, a dry clayey agricultural soil was compacted in steel cups with a hydraulic piston, and the shear strength was measured with a fall‐cone penetrometer. Two cups were compacted in the same manner, using one to measure the shear strength and the second for splash erosion measurements. A laboratory splash board of 1 m radius, divided into 13 concentric compartments, was used to collect the splashed particles. The water drop diameter used was 4·9 mm falling onto a soil splash cup of 50·2 cm² area from 8 m height with a terminal velocity of 8·8 m s^?1. The spatial distribution of the splashed particles, for different soil compactions, fitted the fundamental splash distribution function (FSDF) model better than the exponential function. The shapes of the curves of this function demonstrated the importance of the source area size; the smaller the cup diameter the better the spatial distribution is expressed by an exponential function. In addition, variability in soil surface conditions contributes to variation in splash characteristics. Detachment rates and average radial distance followed second degree relationships in terms of shear strength. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Metamorphic history of the South Tibetan Detachment System,Mt. Everest region,revealed by RSCM thermometry and phase equilibria modelling   总被引：2，自引：0，他引：2  

J. M. COTTLE  D. J. WATERS  O. BEYSSAC  M. J. JESSUP 《Journal of Metamorphic Geology》2011,29(5):561-582

This study combines microstructural observations with Raman spectroscopy on carbonaceous material (RSCM), phase equilibria modelling and U–Pb dating of titanite to delineate the metamorphic history of a well‐exposed section through the South Tibetan Detachment System (STDS) in the Dzakaa Chu valley of Southern Tibet. In the hanging wall of the STDS, undeformed Tibetan Sedimentary Series rocks consistently record peak metamorphic temperatures of ～340 °C. Temperatures increase down‐section, reaching ～650 °C at the base of the shear zone, defining an apparent metamorphic field gradient of ～310 °C km^?1 across the entire structure. U–Th–Pb geochronological data indicate that metamorphism and deformation at high temperatures occurred over a protracted period from at least 20 to 13 Ma. Deformation within this 1‐km‐thick zone of distributed top‐down‐to‐the‐northeast ductile shear included a strong component of vertical shortening and was responsible for significant condensing of palaeo‐isotherms along the upper margin of the Greater Himalayan Series (GHS). We interpret the preservation of such a high metamorphic gradient to be the result of a progressive up‐section migration in the locus of deformation within the zone. This segment of the STDS provides a detailed thermal and kinematic record of the exhumation of footwall GHS rocks from beneath the southern margin of the Tibetan plateau.  相似文献   

中天山东部南北两缘韧性剪切带变形特征   总被引：2，自引：0，他引：2       下载免费PDF全文

唐哲民蔡志慧  王宗秀陈方远 《中国地质》2011,38(4):970-979

(1)中天山北缘韧性剪切带除右旋韧剪变形之外,还发育相对较弱的左旋韧剪变形,局部残留加里东晚期的逆冲推覆韧剪变形;右旋韧剪变形的变形温度环境为中-低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(2)中天山南缘韧性剪切带以右旋韧剪变形为主,兼具左旋韧剪变形;右旋韧剪变形的变形温度环境为中温、中低温、低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(3)东天山存在一系列右旋韧性剪切带,中天山南北两缘韧性剪切带的构造变形与辛格尔断裂、兴地断裂等右旋韧性剪切带的变形以及塔里木北缘东部晚震旦—早古生代地层的同劈理褶皱变形、南天山泥盆纪地层的变形可能具成因联系。  相似文献   

Rayleigh面波各阶模式频散曲线对横波速度和层厚的敏感性探讨   总被引：1，自引：1，他引：0  

张明财  熊章强  张大洲  刘白璐 《物探化探计算技术》2011,33(2):153-158

Rayleigh面波勘探的目的在于有效利用频散曲线反演地层厚度及横波速度,而不同模式的频散曲线对横波速度和层厚的敏感性不同。通过求取介质参数变化10%后与参数不变化时的二组频散曲线的差值,得到各阶模式的频率～相速度差曲线,分析了Rayleigh面波各模式频散曲线对横波速度、层厚的敏感性。试验结果表明,基阶模式对于浅层的横波速度和层厚比较敏感,敏感区域主要集中在较窄的频带范围内。而高阶模式对于相对较深层的横波速度和层厚比较敏感,且频率范围分布较大,敏感性强的频段分布比较分散。研究结果可以为Rayleigh面波多模式联合反演提供理论依据。  相似文献   

“This is a Montreal Issue”: Negotiating responsibility in global production and investment networks     

Noah Quastel 《Geoforum》2011,42(4):451-461

While geographers have increasingly focused on how global commodity and production networks create new ‘geographies of responsibility’ there has been little empirical work considering how responsibility is worked into management systems and social activism in such networks. Drawing on literature from global production networks, geographies of responsibility and other literatures, this paper explores the dynamic and contested ways in which concepts of responsibility can play a role in network regulation. Both foreign direct investment and commodity networks (here referred to as ‘global production and investment networks’) are subject to complex negotiations and compromises involving corporate social responsibility and sustainability initiatives as well as shareholder activist, human rights, labor, and environmental activism. This is illustrated by reference to conflicts in Canada over Alcan, Inc.’s investments from 1993 to 2007 in the Utkal Alumina Project in Orissa, India. The project involved significant socio-environmental conflict. In Canada, Alcan’s investment was met by civil society campaigns that tested the company’s commitments to sustainability and corporate social responsibility. The case study suggests revising theories of geographies of responsibility. While foreign direct investment can create new relationships between distant others, these are fluid and contingent and not necessarily desirable. Rather than see networks as a source of responsibility we should work to ensure that the relationships that networks foster be structured to ensure our deeper values are respected.  相似文献   

Fabric evolution within shear bands of granular materials and its relation to critical state theory   总被引：2，自引：0，他引：2  

Pengcheng Fu  Yannis F. Dafalias 《国际地质力学数值与分析法杂志》2011,35(18):1918-1948

In an effort to study the relation of fabrics to the critical states of granular aggregates, the discrete element method (DEM) is used to investigate the evolution of fabrics of virtual granular materials consisting of 2D elongated particles. Specimens with a great variety of initial fabrics in terms of void ratios, preferred particle orientations, and intensities of fabric anisotropy were fabricated and tested with direct shear and biaxial compression tests. During loading of a typical specimen, deformation naturally localizes within shear bands while the remaining of the sample stops deforming. Thus, studying the evolution of fabric requires performing continuous local fabric measurements inside these bands, a suitable task for the proposed DEM methodology. It is found that a common ultimate/critical state is eventually reached by all specimens regardless of their initial states. The ultimate/critical state is characterized by a critical void ratio e which depends on the mean stress p, while the other critical state fabric variables related to particle orientations are largely independent of p. These findings confirm the uniqueness of the critical state line in the e ? p space, and show that the critical state itself is necessarily anisotropic. Additional findings include the following: (1) shear bands are highly heterogeneous and critical states exist only in a statistical sense; (2) critical states can only be reached at very large local shear deformations, which are not always obtained by biaxial compression tests (both physical and numerical); (3) the fabric evolution processes are very complex and highly dependent on the initial fabrics. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

利用抗剪强度计算地基承载力特征值方法探讨          下载免费PDF全文

潘广灿  张金来  郜松杰 《探矿工程》2011,38(11):68-70,82

利用不同地层情况的计算实例,分别采用抗剪强度指标厚度加权平均法和附加应力面积法对地基承载力特征值进行计算,对计算结果进行分析,对不同的计算方法的理论原理进行了剖析,提出利用附加应力系数法计算抗剪强度指标标准值的结论。同时提出抗剪强度指标应采用不固结不排水剪指标,当持力层为粉土时应对其抗剪强度指标进行75%的折减的方法和建议。为合理利用抗剪强度指标计算地基承载力特征值提供了有益的参考。  相似文献