Analysis of shaft resistance of jacked piles in sands     

Rodrigo Salgado 《国际地质力学数值与分析法杂志》2011,35(15):1605-1635

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD     

Yang Xiao-feng  Zhang Chen-rong  Huang Mao-song  Yuan Ju-yun 《岩土力学》2016,(10):2877-2884

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.  相似文献   

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors     

《Applied Ocean Research》2016

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.  相似文献   

软土区旋喷式插筋微型桩工艺试验研究     

吴越琛  王进明  陆舟超 《探矿工程》2018,45(12):74-78

软土地质条件下建筑物的沉降变形和承载力要求越来越高,对基础施工工艺提出了较高要求。在高压旋喷施工工艺的基础上,提出旋喷式插筋微型桩施工工艺,开展了微型桩工艺试验研究,结果表明该工艺大幅提高了单桩桩基承载性能,为实际工程应用提供了技术数据支持。  相似文献   

青藏高原云团东传过程及其中中尺度对流系统的统计特征     

王婧羽  王晓芳  汪小康  崔春光 《大气科学》2019,43(5):1019-1040

利用逐小时风云卫星TBB资料、逐小时中国自动站与CMORPH降水产品融合数据以及国家级地面观测站24小时累积降水量,统计分析2010～2016年夏季,伴随下游地区（104°E以东）降水的青藏高原云团东传过程以及东传过程中镶嵌于云团中的中尺度对流系统（Mesoscale Convective System,简称MCS）特征。结果表明,共出现120次伴随下游降水的高原云团东传过程,6月出现最频繁,但持续时间较长的过程多出现在7月。云团向东传播的主要三条路径是平直东传、沿长江折向东传和复合东传。其中路径二——沿长江折向东传中的过程是高影响过程,因为过程次数较多（46次）,过程平均持续时间较长（62小时）,在下游地区引发的降水日数和暴雨日数最多。属于东传过程的MCS在7月形成最多,集中分布在青藏高原东坡、云贵高原东部、长江沿岸及其以南地区。高原MCS影响长江中下游地区降水主要是通过向东传播的形式实现,因为即使生命史更长的中α尺度对流系统（Meso-α Convective System,简称MαCS）也鲜少直接移动至110°E以东地区。不同区域的中α尺度持续性拉长形对流系统（Permanent Elongated Convective System,简称PECS）的日变化特征显示,东传过程MCS更容易在夜间从高原东坡向东传播至下游地区。在三条路径中,路径二中的东传过程MCS数量最多、在下游地区发展最旺盛并与降水日数和覆盖范围存在更好的对应关系。  相似文献   

Nonlinear analysis of laterally loaded rigid piles in cohesive soil     

Lianyang Zhang  Saeed Ahmari 《国际地质力学数值与分析法杂志》2013,37(2):201-220

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

泥湾门大桥浅海大直径嵌岩桩施工技术          下载免费PDF全文

柴云来 《探矿工程》1994,(3):28-29,31

介绍了在浅海施工直径２．２０ｍ嵌岩桩的技术问题。包括平台的搭设，用刮刀钻头与牙轮钻头钻进克取硬岩一次成孔工艺，利用冲洗液平衡原理处理浅海钻进护简断裂的成孔方法，改进浇灌清孔流程，保证浇灌质量。  相似文献   

滑坡治理方法及其应用实例   总被引：11，自引：1，他引：11  

谢建清 《地质与勘探》1995,31(3):58-62

对目前国内外滑坡治理方法进行总结综述，例举了滑坡治理的几个实例，指出了滑坡治理的优先考虑方法。  相似文献   

深层搅拌桩在某住宅楼地基加固中的应用     

唐欣然 《矿产与地质》2007,21(5):580-584

以桂林某工地为例阐述了深层搅拌桩在深厚软弱地基中的设计、施工方法以及应用效果。  相似文献   

土性指标和地层性质对水泥搅拌桩成桩质量的影响     

符学兵 《江苏地质》2007,31(4):370-372

从水泥土的固化机理出发,结合水泥搅拌桩桩身标准贯入试验和水泥土配合比试验,分析讨论了土性指标、土质条件和地层性质对水泥搅拌桩成桩质量的影响。  相似文献