基于矩形网格的有限差分走时计算方法   总被引：4，自引：0，他引：4       下载免费PDF全文

李振春  刘玉莲  张建磊  马在田  王华忠 《地震学报》2004,26(6):644-650

对于大多数速度场，地震波沿射线传播的初至波走时，可以用有限差分外推的方法在二维或三维数值网格上计算出来. 在保证精度的条件下，为提高计算效率和适应性，本文推导了基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法. 另外，该方法对首波和散射波做了合适的处理，而且不会碰到传统射线法存在的阴影区和焦散区等问题. 简单模型和复杂的Marmousi模型试算的结果表明，该方法精度较高并适用于强纵、横向变速的复杂介质. 基于该方法的Kirchhoff叠前深度偏移, 在主要构造和目的层位置的成像效果上基本达到了波动方程法叠前深度偏移的位置成像效果. 由于未考虑续至波等有效能量，在成像的保幅性上不如波动方程法叠前深度偏移的效果，但其计算效率则明显高于全格林函数法和波动方程法.   相似文献   

Silica depleted melting of pelites. Petrogenetic grid and application to the Susqueda Aureole, Spain   总被引：2，自引：0，他引：2  

M. Riesco  K. Stüwe  J. Reche  F. J. Martinez 《Journal of Metamorphic Geology》2004,22(5):475-494

Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica‐undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre‐anatectic, regional cordierite‐andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz‐saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica‐undersaturated melting in those rocks that were previously depleted in silica. Silica‐undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica‐undersaturated bulk compositions, for example corundum. It is shown that the quartz‐rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz‐poor precursors (from which the quartz veins segregated) melted in the silica‐undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica‐undersaturated rocks produced only negligible melt and no subsequent melt loss.  相似文献   

Wave propagation across fluid–solid interfaces: a grid method approach     

Jianfeng Zhang 《Geophysical Journal International》2004,159(1):240-252

  相似文献   

空间信息网格中动态复制策略的研究     

谢储晖  郭达志 《华东地质学院学报》2005,28(2):179-183

空间信息网格项目数据量大，用户遍及各地，对数据文件的请求延时大、占大量带宽。复制可以节省带宽、减少时延、均衡负载、改善系统可靠性。采用动态复制技术可以使用户有效地获得所需的数据。详细地论述了动态复制策略以及空间信息网格中的复制管理机制、复制服务流程和具体实施。  相似文献   

浅析网格化测量标志巡查信息直报技术     

宋拥军  刘现印  王凤娇  侯立媛  刘先森 《测绘与空间地理信息》2016,(11):43-46

测量标志巡查是加强测量标志管护的重要手段。本文采用网格化理念设计,集成应用网络、智能移动终端、工作流、地图网络化服务等技术提出了一种测量标志巡查信息直报技术,可实现全省测量标志巡查信息的采集、实时在线或事后离线(WIFI等)巡查信息报送、审核、入库、应用等业务的网络化、准实时化、一体化,提高了测量标志巡查工作的科学化和规范化。  相似文献   

基于等高线隔断线确定DEM适宜分辨率的方法研究     

程德强  高春留  赵牡丹 《测绘科学技术学报》2016,(3):306-312

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。  相似文献   

基于SDOG-ESSG的地球系统元胞自动机框架及其应用试验     

余接情  石珍  吴立新  邢松伟  贾永基 《测绘学报》2016,45(Z1):40-47

元胞自动机结构简单且具备模拟复杂系统的能力,已被广泛应用于大气、流体力学、地球物理等领域。然而,现有元胞自动机以欧氏空间为约束进行地球系统过程模拟,忽略了地球重力等天然约束,导致计算过程中元胞状态的传递方向与真实运动的趋势方向不相符,一定程度上扭曲了最终的模拟结果。本文提出了地球系统元胞自动机这一概念,并从元胞表达及构建、邻居模型等方面设计了基于SDOG-ESSG格网的地球系统元胞自动机框架。由于演化规则取决于不同的应用,因此本文进一步以地壳的热传递为例,通过对热力学方程离散化设计了相应的演化规则。最后,借助公开的数据源开展了地壳热传递元胞自动机模拟的初步试验,并与一定区域下的数值模拟结果展开了比对。试验表明,与数值模拟方法相比,本文方法的模拟结果相对误差控制在27%以内,具备一定程度的可行性,可作为地球系统过程模拟的一种新思路。  相似文献   

A hybrid approach to modeling territorial control in violent armed conflicts          下载免费PDF全文

Ran Tao  Daniel Strandow  Michael Findley  Jean‐Claude Thill  James Walsh 《Transactions in GIS》2016,20(3):413-425

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.  相似文献   

Grid pattern recognition in road networks using the C4.5 algorithm   总被引：1，自引：0，他引：1  

Jing Tian  Fei Gao  Feng Zhao 《制图学和地理信息科学》2016,43(3):266-282

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.  相似文献   

与找矿信息量法结合的含矿网格单元蒙特卡洛矿产资源潜力评价方法的原理及应用     

浦路平  朱国器  尹意求  林锦富 《矿产与地质》2016,(3):490-495

文章介绍了以含矿网格单元为统计单位、并与找矿信息量法结合的蒙特卡洛矿产资源潜力评价方法的原理和工作步骤,以及用该法进行丹池锡多金属成矿带锡矿矿产资源潜力评价工作案例,表明该法可以把评价工作区的矿产空间分布信息、成矿模式和找矿模型、成矿-找矿空间信息引入蒙特卡洛方法中,无需人类专家估计矿床个数,减少了工作步骤,提高了工作效率和自动化程度,减少了因人为主观性而造成的评价误差。  相似文献