Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S     

John D. Bicknell  Jean-Christophe Sempere  Ken C. Macdonald  P. J. Fox 《Marine Geophysical Researches》1987,9(1):25-45

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.  相似文献   

Reducing the short-term mortality of juvenile school prawns (Metapenaeus macleayi) discarded during trawling     

Macbeth  William G.; Broadhurst  Matt K.; Paterson  Brian D.; Wooden  Michael E.L. 《ICES Journal of Marine Science》2006,63(5):831-839

  相似文献   

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers   总被引：4，自引：1，他引：4  

周宏杰  闫澍旺崔溦 《中国海洋工程》2005,19(1):155-166

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.  相似文献   

旧路改建高速公路中地基强夯效应测试与工艺参数分析   总被引：2，自引：1，他引：1  

吕国仁  崔新壮 《岩土力学》2008,29(9):2542-2546

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。  相似文献   

BP神经网络在局部似大地水准面精化的应用   总被引：1，自引：0，他引：1  

李爱国  WANG Wei  徐永胜 《全球定位系统》2008,33(3):29-31

针对高程拟合中的模型误差问题,采用BP神经网络方法进行拟合,可以减小模型误差,提高似大地水准面的精化精度。在焦作市局部似大地水准面精化算例中,BP神经网络高程拟合取得了良好的效果。  相似文献   

断层垂向封闭性定量研究方法及其在准噶尔盆地白家海凸起东道海子断裂带应用   总被引：2，自引：0，他引：2  

梁全胜  刘震  何小胡  王德杰  王晓东 《现代地质》2008,22(5)

断层的垂向封闭能力主要取决于断面的紧闭程度和断裂带内填充物的岩性。在定量计算断面正压力和断层两侧地层泥地比的基础上,提出了断层垂向封闭因子(Fvs)的概念,并将其定义为断面正压力与断层两侧地层泥地比的乘积。通过该参数可以定量评价断层的垂向封闭能力。以准噶尔盆地东道海子断裂为例,在建立断层垂向封油、气能力评价标准的基础上,应用断层垂向封闭因子(Fvs)定量评价了该断裂带的成藏期垂向封闭性及现今垂向封闭性,分析了该断裂带对油气成藏的控制作用,得到较好效果。  相似文献   

半参数平差模型估计量的精度评定     

潘雄  刘立龙  陈刚  田玉刚 《测绘工程》2008,17(6):13-15

将半参数估计理论引入测量数据处理理论中,利用Blight和Ott提出的思想,用多项式函数来表示半参数平差模型中的非参数分量,从而得到了半参数平差模型中参数分量和非参数分量的Bayes估计量,通过理论证明,半参数模型参数分量的Bayes估计为通常意义下高斯马尔可夫模型参数估计值与参数期望的加权平均,是一致、渐近无偏和渐近有效估计量,并且其方差小于参数模型中参数估计量的方差。在一定情况下推广了平差理论,具有一定的理论价值。  相似文献   

斜坡应力分布的系统测试与反演分析     

沈军辉  崔建凯  徐进  贾留杰 《工程地质学报》2008,16(5):616-619

采用简易、快速、经济的洞壁应力恢复法对某工程边坡勘探平硐洞壁应力场作了系统测试, 并采用FLAC2D软件对测试成果作了斜坡初始应力的反演分析。结果表明, 斜坡应力场随深度变化具有明显分带性, 应力量值随硐深曲线具有典型的驼峰式特征, 与理论分析结果相符, 表明该方法能较好地应用于斜坡应力场的系统测试和研究。成果对认识斜坡岩体的变形破裂及卸荷特征等具有重要意义。  相似文献   

大区域似大地水准面模型的建立方法研究     

赵建虎  王真祥  王胜平  董江 《武汉大学学报(信息科学版)》2008,33(1):68-71

在充分研究现有几何方法确定局域似大地水准面的基础上,根据独立网内点间高程异常差的不变性和独立网间大地高起算基准面与WGS84椭球面的平行性,提出通过两步处理,获得大区域连续似大地水准面的思想和方法,即首先统一相邻两个独立GPS网大地高起算基准面,然后再利用几何方法确定大区域似大地水准面.该方法在长江口北岸得到了很好的验证,并取得了比较理想的精度.  相似文献   

Time-dependent stress change during failure of rocks     

V.T. Belikov  A.F. Shestakov 《Russian Geology and Geophysics》2008,49(5):350-356

The energy balance of a solid subject to fracture has been explored using heat and mass transfer equations with regard to the volumetric and superficial components. In the suggested model, brittle fracture of a cracked solid considered as a heterogeneous two-phase medium is described by an equation analogous to the Griffith’s criterion for propagation of a single crack. The derived equation is used, together with estimates of relative change in specific interface area, to study the respective change of free strain energy and pressure in rocks associated with failure.  相似文献