Helium-argon isotopic tracing for the Pb-Zn-Ag polymetallic ore deposits in the central-south segment of the Da Hinggan Ling Range     

Baode Wang  Shuyin Niu  Aiqun Sun  Huabin Hu  Yaming Liu  Lijun Guo  Shuo Wang 《中国地球化学学报》2008,27(3):235-241

In recent years big strides have been made in the exploration of ores in the central-south segment of the Da Hinggan Ling Range, though some debates still exist on the metallogenesis and sources of ore-forming materials. Pyrite and other sulfides in direct relation to the Pb-Zn-Ag ore deposits were chosen for the He and Ar isotopic analysis of ore-forming fluids, and the first He and Ar isotope data have been obtained from the study region. ^3He/^4He ratios in 14 samples collected from 7 mining districts are 2.17×10^-6-12.52×10^-6, averaging 6.86×10^-6 and their R/Ra ratios are 1.56-9.01 Ra, averaging 4.37 Ra. By projecting the data points onto the ^3He-^4He concentrations diagram, all the points fall near the mantle helium area. The calculated mantle-source helium ratios are within the range of 19.58%-76.96%, with an average of 49.52%. Argon isotopic characteristics are close to those of mantle source, indicating that the ore-forming material was transport upwards via the multi-stage evolution of mantle plume and concentrated as ores in the favorable loci of mantle branch structures.  相似文献   

广西大厂超大型锡矿的形成条件与成矿模式   总被引：3，自引：0，他引：3       下载免费PDF全文

何海洲 《地质找矿论丛》2008,23(3):187-190

超大型矿床的形成条件有其特殊性.大厂超大型锡矿产出于南丹-昆仑关基底性深大断裂带上,经过多旋回构造-岩浆活动使矿质继承叠加,最后聚积于燕山晚期的岩浆热液中.大厂超大型锡矿床是各种成矿因素良好匹配,并经长时期的多重富集综合作用的结果.  相似文献   

下庄矿田湖子地区铀矿找矿方向探讨   总被引：2，自引：0，他引：2       下载免费PDF全文

邱列  毛孟才  王建雄 《地质找矿论丛》2008,23(1):11-15,26

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.  相似文献   

粤东成矿地质背景及银-铜-铅-锌成矿物质来源探讨     

郭锐  曾国光 《矿产与地质》2008,22(3):236-240

通过对粤东地区地层和岩石中成矿元素含量和区域地质背景的分析,认为粤东地区铜铅-锌-银成矿作用与燕山期的构造-岩浆作用关系密切,成矿物质中银-铜-锌以下地壳来源为主,铅则以上地壳及沉积地层来源为主。  相似文献   

利国矿区铜（金）成矿条件的研究     

徐强  董铃翔  段薇心  许克明 《矿产与地质》2008,22(6):531-535

利国矿区是江苏省重要铁矿基地之一,矿区位于秦岭一昆仑纬向构造带东延的南侧与新华夏构造体系第三隆起带的交接复合部位。铁矿床主要产于燕山期闪长玢岩杂岩体与下奥陶统碳酸盐地层的接触带及其附近灰岩中,矿体呈似层状一透镜状等,产状与围岩一致,具层控矿床的特征。笔者主要从成矿地质特征着手,分析总结了该区铜、金矿化特征及主要成矿规律,指出了利国矿区铜（金）矿的找矿方向和有望靶区。  相似文献   

岩石中的渗透率、流体流动及热液成矿作用   总被引：4，自引：0，他引：4  

周利敏  张德会  席斌斌 《地学前缘》2008,15(3):299-310

热液成因的固体金属矿床形成过程中都曾拥有一段流动的历史。成矿物质以溶液的形式从矿源地穿过孔隙或断裂达到了现在的栖身之所,在此过程中流体通过的路径决定了它们的走向,而溶液本身也改变了路径的特征。因此,对于此类矿床的研究不能仅仅囿于眼之所见,而应将古流体流动的观念融入其中,并考察它们的跋涉之路。文中总结了近年来国内外在岩石孔隙、断裂介质及与其相关渗透率对热液成矿作用的控制等领域的研究成果和最新进展,对岩石渗透率、渗透率的影响因素、岩石中流体流动的特征等问题进行了阐述,讨论了渗透率对于热液成矿作用深度、成矿规模、矿质沉淀机制等方面的重要影响,藉此在固体金属矿床研究中强化流"体运动"的观念,并促进构造地质学和成矿作用地球化学间一个新研究方向的发展。  相似文献   

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon     

Lutz Nasdala  Wolfgang Hofmeister  Nicholas Norberg  James M. Martinson  Fernando Corfu  Wolfgang Dörr  Sandra L. Kamo  Allen K. Kennedy  Andreas Kronz  Peter W. Reiners  Dirk Frei  Jan Kosler  Yusheng Wan  Jens Götze  Tobias Häger  Alfred Kröner  John W. Valley 《Geostandards and Geoanalytical Research》2008,32(3):247-265

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.  相似文献   

Recommended Values of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry     

Taeko Shinonaga  Helmuth Aigner  Dilani Klose  Peter Spinder  Heinz Fröschl  David Donohue 《Geostandards and Geoanalytical Research》2008,32(1):93-101

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.  相似文献   

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例   总被引：1，自引：0，他引：1       下载免费PDF全文

赵伦山  高大忠  李嘉 《地球科学》1994,3(3)

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。  相似文献   

膜分离技术的应用及发展趋势   总被引：8，自引：0，他引：8  

岳志新  马东祝  赵丽娜  赵寒梅 《云南地理环境研究》2006,18(5):52-57

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。  相似文献