涉及埃达克岩实验的若干基本概念与问题辨析     

汪洋 《岩石矿物学杂志》2016,35(1):162-176

根据热力学原理,部分熔融是相变的一种表现形式。当岩石沿p-T轨迹穿过固相线时即可发生熔融。自然界岩石常见的不一致熔融行为可以导致残留相具有不同于源岩的整体成分与矿物组合。残留相与源岩可以属于不同的变质相,岩性也可以不同。"C型埃达克岩"含有含水矿物,它们不是干体系熔融的产物。实验岩石学研究表明,基性成分(SiO_250%)体系较中性、酸性体系在1.0~2.0 GPa压力条件下失水熔融时更易于形成"榴辉岩质"的残留相。源岩除SiO_2以外的其它主要氧化物会影响残留相中各矿物的比例,进而影响熔体的Sr、Y及HREE含量。因此,"C型埃达克岩"高Sr低HREE特征的形成取决于熔融温压条件以及源岩的主量元素、微量元素组成等多重因素。高钾含量(K_2O≈1.0%)的基性、中基性源岩形成的熔体成分与"C型埃达克岩"相比过于富Al或富Na。中等富钾的基性源岩的低程度熔融可以形成高硅的"C型埃达克岩",但无法形成中性的"C型埃达克岩"。  相似文献   

固相吸附毒素跟踪技术(SPATT)在浙江南麂海域的应用     

渠佩佩  杨晶晶  徐轶肖  高寒  佟蒙蒙 《海洋与湖沼》2016,47(4):795-803

浙江南麂岛海域是我国近岸贝类的重点养殖区,近年来一直遭受脂溶性贝类毒素(lipophilic shellfish toxins,LSTs)的污染,威胁着人类健康。为了建立有效的食品安全预警方法,本研究利用固相吸附毒素跟踪技术(solid phase adsorption toxin tracking,SPATT)在该海域进行了为期一年的野外监测和LSTs毒素分析。结果表明:7种LSTs毒素在SPATT(DIAION?HP20)中被检出,分别是大田软海绵酸(okadaic acid,OA)、鳍藻毒素-1(dinophysistoxin-1,DTX-1)、虾夷扇贝毒素(yessotoxin,YTX)及其衍生物homo YTX、扇贝毒素-2(pectenotoxin-2,PTX-2)及其衍生物7-epi-PTX2sa和环亚胺毒素(gymnodimine,GYM);有8种毒素在厚壳贻贝(Mytilus galloprovincialis)中被检出,分别是OA、DTX1、homo YTX、PTX2、7-epi-PTX2sa、GYM、原多甲藻酸贝类毒素-3(azaspiracid-3,AZA-3)和虾夷扇贝毒素衍生物45-OH-homo YTX。整体而言,SPATT(HP20)中吸附的毒素种类与贝肉中监测出的毒素种类大体上一致,且两者间OA、DTX1和PTX2的浓度在时间上具有较好的相关性,可见SPATT(HP20)对这些LSTs毒素具有较高的灵敏度,有望作为水体中LSTs毒素的预警监测材料。南麂岛海域LSTs分布特征明显,夏季最高,其次是春秋季,冬季最低,其中2014年夏季贝肉中OA毒素含量高达77.19ng/g贝肉,超出国家限量标准(45ng/g贝肉)比例达11.76%,为浙江南麂海域贻贝的食用安全带来隐患。  相似文献   

Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas     

《Applied Ocean Research》2016

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.  相似文献   

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems     

《Marine and Petroleum Geology》2016

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.  相似文献   

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China     

YANG Peng  REN Zhanli  XIA Bin  TIAN Tao  ZHANG Yong  QI Kai  REN Wenbo 《《地质学报》英文版》2018,92(3):1157-1169

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.  相似文献   

地物化方法在航磁异常查证中的应用     

田宇  祁程  杨金政  沈正新  汪哲  张文峰 《地质与资源》2018,27(4):406-410

航磁异常查证是矿产勘查中的一个重要环节,其目的是通过地面查证,确定异常是否存在,追踪异常源,了解异常源所处的地质环境,对异常作出客观评价,提出进一步工作的建议,为后续资料解释提供依据.通过使用地物化综合方法对黑C-2011-02243号异常查证发现：地质剖面测量和土壤地球化学测量可在地表发现较好的找矿线索;高精度磁测及激电中梯测量则反映了深部地质体及矿化特征.依据查证结果认为,在进行航磁异常查证工作时,可优先进行剖面性的地质、高精度磁法及土壤地球化学测量工作;在分析上述测量结果的基础上安排剖面性的电法测量;如存在进一步找矿信息,可安排面积性物化探测量及工程验证工作.  相似文献   

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素     

祁柯宁  彭博  李宗星  刘成林  谢庆宾 《地质论评》2018,64(5):1263-1276

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。  相似文献   

多相糜棱岩内第二相对应变局部化的影响——以秦岭群花岗质糜棱岩为例     

韩宁  赵中宝  王根厚  孙丽静  巴合达尔·巴勒塔别克 《地质学报》2021,95(5):1614-1629

糜棱岩韧性变形发生的应变局部化过程,尤其是多相糜棱岩第二相对基质相变形的影响一直是显微构造研究难点.研究表明糜棱岩借助颗粒边界滑移实现多相混合,形成多矿物相集合体.在多相糜棱岩内,第二相在基质相颗粒边界施加齐纳阻力,牵制基质相颗粒边界的迁移速率,破坏基质相颗粒的动态平衡过程,使基质相颗粒位于古应力计对应的颗粒粒度以下,导致基质相整体的表面积增大,促进扩散交换过程,提高了扩散蠕变,降低了基质相位错蠕变和结晶学优选方位(CPO)形成的效率,使变形机制从颗粒粒径不敏感蠕变机制(GSI)过渡为颗粒粒径敏感蠕变机制(GSS).另外,多相糜棱岩内的第二相具有诱导应变局部化的效应,使塑性应变局部化更为强烈,引起物质强度的变化,进而引起岩石变形过程和岩石圈流变行为的改变.选取秦岭群花岗质糜棱岩进行多相矿物糜棱岩定量化研究,结果显示花岗质糜棱岩伴随着云母含量的增多以及各相混合程度的增大,石英的颗粒粒度明显减小,CPO强度显著降低,基质相显微变形受第二相控制逐渐增强.  相似文献   

铀矿勘查中MT数据提取极化信息可行性研究     

王恒  胡英才  张濡亮 《铀矿地质》2021,(2):269-275

铀矿勘查中大地电磁测深法(以下简称MT法)的应用十分广泛,而频率域电磁勘探中激电效应切实存在。激电参数作为反映岩、矿石电化学性质的参数,在地质解译过程中常常被认为是金属硫化物的局部富集。为了充分利用铀矿床MT数据辅助地质解译,需要从中提取具有多属性特征的激电参数,能否成功提取该参数一直以来备受关注。文章从激电异常识别和二维反演试算两方面来论述成功提取的可行性。结果表明,仪器能够采集到含矿岩体所产生的激电异常,反演试算结果能够还原理论模型的地下空间展布情况。从而论证了从铀矿床MT数据中提取极化率是可行的。  相似文献   

全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献