全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献   

水合物地层低热固井水泥浆用相变微胶囊的制备及应用          下载免费PDF全文

杨国坤  汪爱明  尹舒婷  代天  刘天乐  蒋国盛 《探矿工程》2021,48(3):118-124

当深海固井遇到天然气水合物地层时,由于水泥浆水化放热,导致水合物的相变平衡条件发生改变,诱发水合物分解,引起二界面胶结质量下降等问题。为提高水合物地层固井质量,可向水泥浆中添加具有吸热控温作用的相变微胶囊,可有效降低固井水泥浆的水化升温。基于此,以配比石蜡为控温芯材、碳酸钙为壁材,利用自组装法制备了一种使用于深水水合物地层固井水泥浆控温微胶囊。由于固井水泥浆在达到水合物地层的过程中,外界温度环境复杂,单一相变温度的控温芯材极易失效。为扩展控温区间,选用切片石蜡与白油作为混合芯材,控温区间达到14.8~39.8 ℃。研究表明,该微胶囊表观形态良好、彼此无团聚,在热循环过程中,不易发生泄漏。与水泥浆复配后,对水泥浆流变性能无明显影响。在低掺加量时,微胶囊主要起降低水泥浆峰值温度的效果,并提升水泥石整体力学强度;高掺加量时,微胶囊既可以有效降低水泥浆峰值温度,也可以明显地延缓水泥浆放热速率。  相似文献   

CINRAD-SA双偏振雷达资料在降水估测中的应用初探   总被引：2，自引：0，他引：2  

陈超  胡志群  胡胜  张扬  李珊珊 《气象》2019,45(1):113-125

对基于水平反射率ZH和差分传播相移率K_(DP)的降水估测综合法R(C)进行了改进,并对广州S波段双偏振雷达2016年2次飑线和2次台风降水过程的Φ_(DP)使用小波分析进行滤波处理,在此基础上使用变距最小二乘法拟合得到K_(DP)的值。分别使用R(C)和R(Z_H)法对2次飑线和2次台风降水过程进行降水估算,将估算结果和雨量计小时雨量进行了对比,并将两种方法的评估结果进行了对比。结果表明:(1)对于飑线类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度要好于R(Z_H)法,且降水率越大,R(C)法优势越明显,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均相对误差(RE)降低了17. 2%,平均绝对误差(AE)减少了1.89 mm,平均均方根误差(RMSE)减少了1.66 mm;(2)对于台风类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度也好于R(Z_H)法,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均RE降低了33. 19%,平均AE减少了3. 95 mm,平均RMSE减少了4.05 mm;(3)对于飑线和台风两种类型降水R(C)法都明显改善了降水率较大时的R(Z_H)法低估问题,但R(C)法在降水率10 mm·h~(-1)时也存在低估,可能是由雨滴谱资料观测误差导致拟合的系数偏小或雷达硬件造成的观测偏差等造成的。  相似文献   

CHARACTERISTICS OF TORSIONAL GROUND MOTIONS     

H. HAO 《地震工程与结构动力学》1996,25(6):599-610

Due to the inherent difficulty in directly recording the rotational ground motions, torsional ground motions have to be estimated from the recorded spatially varying translational motions. In this paper, an empirical coherency function, which is based on the recorded motions at the SMART-1 array, is suggested to model the spatial variation of translational motions. Then, the torsional ground motion power spectral density function is derived. It depends on the translational motion power spectral density function and the coherency function. Both the empirical coherency function and the torsional motion power spectral density function are verified by the recorded motions at the SMART-1 array. The response spectra of the torsional motions are also estimated. Discussion on the relations between the torsional motion response spectrum and the corresponding translational motion response spectrum is made. Numerical results presented can be used to estimate the torsional ground motion power spectral density function and response spectrum.  相似文献   

FLOOD MODELLING WITH GIS-DERIVED DISTRIBUTED UNIT HYDROGRAPHS     

I. MUZIK 《水文研究》1996,10(10):1401-1409

The concept of a spatially distributed unit hydrograph is based on the fact that the unit hydrograph can be derived from the time–area curve of a watershed by the S-curve method. The time–area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. Accurate determination of the time–area diagram is made possible by using a GIS. The GIS is used to describe the connectivity of the links in the watershed flow network and to calculate distances and travel times to the watershed outlet for various points within the watershed. Overland flow travel times are calculated by the kinematic wave equation for time to equilibrium; channel flow times are based on the Manning and continuity equations. To account for channel storage, travel times for channel reaches are increased by a percentage depending on the channel reach length and geometry. With GIS capability for rainfall mapping, the assumption of a uniform spatial rainfall distribution is no longer necessary; hence the term, spatially distributed unit hydrograph. An example of the application for the Waiparous Creek in the Alberta Foothills is given. IDRISI is used to develop a simple digital elevation model of the 229 km² watershed, using 1 km × 1 km grid cells. A grid of flow directions is developed and used to create an equivalent channel network. Excess rainfall for each 1 km × 1 km cell is individually computed by the Soil Conservation Service (SCS) runoff curve method and routed through the equivalent channel network to obtain the time–area curve. The derived unit hydrograph gave excellent results in simulating an observed flood hydrograph. The distributed unit hydrograph is no longer a lumped model, since it accounts for internal distribution of rainfall and runoff. It is derived for a watershed without the need for observed rainfall and discharge data, because it is essentially a geomorphoclimatic approach. As such, it allows the derivation of watershed responses (hydrographs) to inputs of various magnitudes, thus eliminating the assumption of proportionality of input and output if needed. The superposition of outputs is retained in simulating flood hydrographs by convolution, since it has been shown that some non-linear systems satisfy the principle of superposition. The distributed unit hydrograph appears to be a very promising rainfall runoff model based on GIS technology.  相似文献   

卡尔曼滤波在InSAR噪声消除与相位解缠中的应用   总被引：10，自引：4，他引：6  

刘国林  独知行  薛怀平  郝晓光 《大地测量与地球动力学》2006,26(2):66-70

相位解缠作为InSAR技术中的关键步骤,一直是研究的难点和热点。通常的相位解缠方法在相位解缠前首先必须进行噪声消除,而卡尔曼滤波将相位解缠问题转化为状态估计问题,实现了相位解缠与噪声消除一并处理,成为一种相位解缠新途径。并提出了卡尔曼滤波在相位解缠与噪声抑制中的一种新算法。  相似文献   

叠后地震属性分析在油气田勘探开发中的应用   总被引：29，自引：24，他引：5       下载免费PDF全文

吕公河  于常青  董宁 《地球物理学进展》2006,21(1):161-166

地震属性分析技术一直是地震特殊处理和解释的主要研究内容.随着油气勘探开发的发展,地震属性分析技术已经成为油藏地球物理研究的核心内容,是勘探地震与开发地震之间纽带.本文针对鄂尔多斯盆地的低幅度构造、低孔隙、低渗透率、致密性隐蔽油气藏的特点,综合应用相干数据体分析、地震相自动分类定性识别砂体厚度、地震振幅属性分析、频谱分解、多井约束的储层叠后反演等叠后属性分析技术,探索了一套适合该区油气特征的储层横向预测及油气识别模式.为该区油气勘探开发,储量计算提供可靠依据.同时也为隐蔽性油气藏的勘探开发积累了经验.  相似文献   

利用静止卫星云图进行二维傅里叶相位导风试验   总被引：7，自引：2，他引：5  

张红  王振会  许建明 《高原气象》2006,25(1):105-109

根据二维傅里叶相位分析原理,对1 min间隔的IR云图进行由云推导风的反演。利用模块高度频数直方图把云分为高、中、低云。对连续三幅IR云图进行二维傅里叶相位导风计算,得到两个反演风场,对两个风场相同位置上的风矢进行逐点比较,剔除风向或风速差别较大的风矢,再对处理后的风场进行高度调整法的质量控制,把不合理的风矢剔除或调整到合理的高度层,得到连续性较好的风场。  相似文献   

第二影区地震震相到时特征变化浅析     

陈凯男  刘立申  王利兵  赵志远  宋昭  罗娜  贾华 《山西地震》2021,(1):1-4

运用国家台甚宽和超宽频带地震计记录的波形数据,对震中距介于105°～128°(即第二影区)的地震波形进行仿真处理,分析各台站地震波由地幔传播到核幔交界面时,各震相记录特征发生的变化.结果表明,当震中距增大到105°左右时,地震波进入到核幔过渡带这一复杂的低速层中,地震波能量衰减加快;P波与Pdif波震相未表现出明显的分...  相似文献   

邢台7.2级地震的发震背景特征   总被引：1，自引：1，他引：0  

解用明  韩和平  鞠永  袁国旭  孙澎涛 《华北地震科学》2006,24(2):55-57

主要从太阳黑子活动、地震迁移、地震韵律和月相等各方面,对邢台地震的发震背景进行了分析。结果显示,这些背景特征是很突出的。认为地震的发生,可能受到多种因素的影响和制约,研究发震背景特征对于我们认识地震和预测未来地震都是有一定意义的。  相似文献