Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl2[AlSi3O10](OH,F)2 series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H3BO3 contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B2O3, 3.64–5.20 wt.% Cs2O, 0.54 wt.% Li2O, 0.57 wt.% Ta2O5, 0.10 wt.% Nb2O5, 0.12 wt.% BeO. The H2O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H2O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.
Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H2O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets. 相似文献
The exsolution of volatile phases from silicate magmas controls physical and chemical magma properties and influences large-scale geologic phenomena and processes having major societal and economic implications including the release of climate-altering gases to the atmosphere, the explosivity of volcanic eruptions, hydrothermal alteration, and the generation of magmatic–hydrothermal mineralization. These volatile phases exsolve from a wide variety of magmas and cover a very broad spectrum of compositions.
The transition from the orthomagmatic to the hydrothermal stages has important bearing on these fundamentally important geologic phenomena, and this report summarizes the published results of a dozen scientific investigations on the magmatic–hydrothermal transition as applied to volcanic eruption and magmatic–hydrothermal mineralization. These studies involve a variety of analytical and experimental methodologies, and many focus on fluid and melt inclusions from mineralized magmatic systems. A primary goal of each study is to better understand the role of magmatic volatiles and the importance of the magmatic–hydrothermal transition on these geologic processes. 相似文献
Modeling landscape with high-resolution digital elevation model (DEM) in a geographic information system can provide essential morphological and structural information for modeling surface processes such as geomorphologic process and water systems. This paper introduces several DEM-based spatial analysis processes applied to characterize spatial distribution and their interactions of ground and surface water systems in the Greater Toronto Area (GTA), Canada. The stream networks and drainage basin systems were derived from the DEM with 30 m resolution and the regularities of the surface stream and drainage patterns were modeled from a statistical/multifractal point of view. Together with the elevation and slope of topography, other attributes defmed from modeling the stream system, and drainage networks were used to associate geological, hydrological and topographical features to water flow in river systems and the spatial locations of artesian aquifers in the study area. Stream flow data derived from daily flow measurements recorded at river gauging stations for multi-year period were decomposed into “drainage-area dependent“ and “drainage-area independent“ flow components by two-step “frequency“ and “spatial“ analysis processes. The latter component was further demonstrated to relate most likely to the ground water discharge. An independent analysis was conducted to model the distribution of aquifers with information derived from the records of water wells. The focus was given on quantification of the likelihood of ground water discharge to river and ponds through flowing wells, springs and seepages. It has been shown that the Oak Ridges Moraine (ORM) is a unique glacial deposit that serves as a recharge layer and that the aquifers in the ORM underlain by Hilton Tills and later deposits exposed near the steep slope zone of the ridges of ORM provide significant discharge to the surface water systems (river flow and ponds) through flowing wells, springs and seepages. Various statistics (cross- and auto-correlation coefficients, fractal R/S exponent) were used in conjunction with GIS to demonstrate the influence of land types, topography and geometry of drainage basins on short- and long-term persistence of river flows as well as responding time to precipitation events. The current study has provided not only insight in understanding the interaction of water systems in the GTA, but also a base for further establishment of an on-line GIS system for predicting spatial-temporal changes of river flow and groundwater level in the GTA. 相似文献
The shear viscosities and 1 bar heat capacities of glasses and melts along the 67mol% silica isopleth in the system SiO2-Al2O3-Na2O-TiO2 have been determined in the temperature ranges 780-1140 K and 305-1090 K respectively. Anomalous behaviour of both these properties is observed for compositions rich in TiO2 and/or Al2O3, an observation attributed to liquid-liquid phase separation followed by anatase crystallization. For samples which do not show anomalous behaviour, it is found that the partial molar heat capacity of the TiO2 component previously determined in Al-free compositions reproduces our heat capacities to within 1.3%. Viscosity data show that addition of TiO2 tends to increase viscosity and melt fragility at constant temperature. Furthermore, heat capacity and viscosity data may be combined within the framework of the Adam-Gibbs theory to extract values of the configurational entropy of the liquids and qualitative estimates of the variation of the average energy barrier to viscous flow. Configurational entropy at 900K is inferred to decrease upon addition of TiO2, in contrast to previous results from Al-free systems. The compositional limit separating normal from anomalous behaviour, as well as the data for homogenous melts have been used to constrain the structural role of Ti in these samples. Our data are consistent with a majority of Ti in five-fold coordination associated with a titanyl bond, in agreement with previous spectroscopic studies. Furthermore, we find no evidence for a Ti-Al interaction in our samples, and we are led to the conclusion that Al and Ti are incompletely mixed, a hypothesis consistent with the observed reduction of configurational entropy upon addition of TiO2, suggesting an important role of medium range order in controlling the variations in thermodynamic properties. 相似文献
Local Modeling方法是一种动力系统预测方法,将其应用于河西内陆区黑河干流出山口莺落峡水文站月平均流量的中长期预测预报,取得了较为理想的成果。预测试验的结果表明,该预测模型有较高计算精度,尤其适用于非主汛期各月的月平均流量的预测;对于主汛期6~9月的月平均流量的预测,在考虑前期来水与预见期内降水的影响后,亦可获到较为理想的预测结果。可以认为,该方法的预报精度达到了水文情报预报规范的要求,Local Modeling方法的应用,将为西北干旱地区河川径流的中长期预报提供了一个新的途径。 相似文献