走滑断裂古地震探槽选址范例   总被引：1，自引：1，他引：0  

袁兆德  刘静  李占飞  邵延秀  李志刚  王鹏  王伟  姚文倩 《地质通报》2016,35(11):1807-1828

探槽选址直接决定了古地震研究的质量,且理想探槽位置具有稀缺性。在收集82篇国内外走滑断裂古地震研究论文的基础上,分析了长序列古地震探槽选址和同震位移探槽选址的构造地貌共性特征。长序列古地震探槽一般布设在断塞塘、拉分盆地、小型湖盆、闸门脊汇水一侧及比较平缓的冲洪积扇或大型冲洪积扇末端等地貌位置。这些地貌位置的共同特征是位于连续的、较高沉积速率的沉积环境,且通常富集14C测年物质。在探槽选址的过程中,不仅要对现今沉积环境,也要对其古地理环境进行评价。然而以发掘古地震同震位移为目的的探槽选址则不同,成功的研究点往往较频繁发生侵蚀和下切事件,其中冲沟是最常见的地貌标志。探槽布设以垂直和平行探槽为主,采取逐次掘进或相间平行排列的方式开挖。由于理想探槽位置的稀缺性,所以在这些优质的探槽点一定要开展长期详细地深入研究,最大限度获得古地震事件的长序列,同时也要注意新技术和新方法的应用。  相似文献   

Neotectonics of the Kharaulakh sector of the Laptev Shelf     

V.S. Imaev  L.P. Imaeva  O.P. Smekalin  A.V. Chipizubov  A.N. Ovsyuchenko  I.I. Kolodeznikov 《Russian Geology and Geophysics》2018,59(7):813-826

Seismotectonic deformation and crustal stress pattern have been studied comprehensively in major seismogenic structures of the Kharaulakh sector of the Verkhoyansk fold system and adjacent parts of the Chersky seismotectonic zone. The study focuses on neotectonic structures, deep structure, and systems of active faults, as well as tectonic stress fields inferred by tectonophysical analysis of Late Cenozoic faults and folds. The results, along with geological and geophysical data, reveal main strain directions and structural patterns of crustal stress and strain in the Arctic segment of the Eurasia-North America plate boundary. The area is a junction of mid-ocean and continental structures evolving in a mixed setting of extension, compression, and their various combinations. The rotation pole of the two plates is presumably located near Buor-Khaya Bay. In this case, extension is expected to act currently upon the neotectonic structures north of the bay and compression to control those in the south and southeast. This inference is consistent with the identified zoning of stress and strain in the Kharaulakh sector.  相似文献   

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models   总被引：1，自引：0，他引：1  

Ali Ozgun Ok  Asli Ozdarici-Ok 《International Journal of Digital Earth》2018,11(6):583-608

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.  相似文献   

孔隙性砂岩中单条变形带与簇状变形带的特征与区别——以远安地堑上白垩统红花套组中变形带为例     

渠芳  连承波  柴震瀚  任冠雄 《地质论评》2021,67(4):67050011-67050011

孔隙性砂岩中的变形带研究近年来取得长足进展,但有关单条变形带与簇状变形带如何区分和界定仍是一个较模糊的问题。本文以远安地堑上白垩统红花套组高孔砂岩中发育的剪切增强压实带和压实剪切带为例,对单条及簇状变形带的特征和区别做出系统分析。研究表明,虽然单条变形带的长度、宽度、错断位移、凸起高度等均明显小于簇状变形带,但是不同运动学成因的变形带宏观特征、微观结构不同,因此不能单纯以规模大小区分二者,需要结合带密度将簇状变形带与变形带列、网格构造等相区分,还需要结合其微观结构特征进行准确鉴定。单条及簇状剪切增强压实带特征类似,均不具核心碎裂带,颗粒主要为中等破碎,多表现为多个不连续分布的碎裂核。簇状剪切增强压实带内部的非均质性更强。单条压实剪切带具有核心碎裂带,依剪切力大小不同,其核心碎裂带内颗粒粉碎程度及边缘过渡带宽度不同,常伴随微小剪切缝痕迹。簇状压实剪切带在镜下可清晰识别出不同的核心碎裂带、带间区域及微小剪切缝,可见S—C组构和断续分布的滑动面。单条及簇状变形带的发育会不同程度地改变储层的物性并可能会对油气运移和开采产生影响。  相似文献   

基于深反射地震剖面的沂沭断裂带岩石圈精细结构     

张尚坤  罗文强  于学峰  田京祥  唐璐璐  陈军  杨斌  杜圣贤  刘凤臣  仵康林 《地质学报》2021,95(11):3192-3204

为揭示沂沭断裂带深部结构及发生—发展过程,查清断裂切割深度及对岩石圈地幔的破坏,探讨沂沭断裂带的构造组合样式、运动方式、地壳稳定性及其对资源环境的约束作用,研究团队于2019年在沂沭断裂带南段沂南—莒县附近布设了一条长约60 km的深反射地震剖面,系统采集了沂沭断裂带和两侧地块的地震数据,对沂沭断裂带深部岩石圈精细结构进行了解剖.结果显示,该区岩石圈结构在横向上表现为以沂沭断裂带为界的块状结构特征,地壳厚度约30.8～39.5 km;莫霍面总体呈西浅东深态势,并被西倾的沂水—汤头断裂(F2)和昌邑—大店断裂(F4)错断,垂直落差达10.5 km.与浅部"两堑夹一垒"的构造组合样式不同的是,沂沭断裂带在深部剖面上表现为由沂水—汤头断裂(F2)和昌邑—大店断裂(F4)向上延伸与分叉散开的多条断裂组成"双枝状"构造组合样式.断裂带内被断层切割的界面反射波多呈向上的拱弧形,其构造形迹具有伸展、挤压和走滑并存的特征,推断这些界面为层间滑脱构造,它们指示了沂沭断裂带"多层滑移"构造运动方式.该断裂带不仅切穿了近地表、壳内地质界面,F2、F4断裂还向下切割莫霍面,深入岩石圈地幔,是深达地幔的深大断裂构造带,为地幔热物质的上涌提供了通道,对中生代的岩浆活动和内生成矿具有控制作用.地震剖面西端的铜井金矿成矿与沿F2断裂上侵的铜井杂岩体关系密切;剖面东端的火山机构保存完整,没有明显构造破坏痕迹,据此认为沂沭断裂带左行走滑主要发生在早白垩世青山期以前,其后水平滑移量应不大.从区域地质分布及地震反演结果看,昌邑—大店断裂(F4)明显将山东省分割为鲁西和鲁东两个地质构造单元,因此将其作为区域地质构造分界线是合理的.本项研究结果进一步加深了沂沭断裂带深、浅部结构的认识,为分析研究沂沭断裂带的深部过程和浅部构造响应及对资源环境的影响提供了资料约束.  相似文献   

1948年川西理塘 M7. 3地震地表破裂特征及Riedel剪切构造分析     

刘亢  李岩峰  郭辉文  张迎峰 《地质学报》2021,95(8):2346-2360

1948年川西理塘M7. 3地震是川滇菱形块体内部近一个世纪以来发生的震级最大的走滑型地震。在对此次同震地表破裂进行详细调查基础上,利用差分GPS对同震地表破裂带进行了精确测量与统计分析。结果揭示该地表破裂的现存长度为36 km,北端始于无量河以北,往东南沿藏坝盆地北东缘、德巫盆地东南缘,延伸至德巫乡北,分为南、北两段,而在交德附近存在约3 km长的地表破裂空区。对同震地表破裂的线密度和同震水平位错量进行分段统计后揭示,此次地震的宏观震中应位于德巫盆地中部交德东南约4~5 km处。对理塘同震地表破裂的Riedel剪切分析结果指示,该破裂带主要由R剪切组成,以发育雁列状排列的挤压鼓包(Push- up)为主要特征,伴有少量R′剪切与T裂缝,缺少P型与X型剪切。其中R剪切占95%以上,其在藏坝段(北段)的优势方向为318°,德巫段(南段)为315°,整条地表破裂带的R剪切平均方向为316°。同时发现,此次地震形成的雁列状挤压鼓包主要以平缓的“弧形”为主,这与1981年道孚MS 6. 9地震和2010年玉树MS 7. 1地震地表破裂带中出现大量反“S”形挤压鼓包有所不同,推断与走滑断裂滑动速率密切相关。沿强滑动速率走滑断层地震破裂带的Riedel剪切发育会更为完善,挤压鼓包也更发育,易形成反“S”形,反之则以平缓的“弧形”为特征。综合分析认为,1948年理塘同震地表破裂带的展布主要受藏坝盆地与德巫盆地控制,而且藏坝段(北段)与德巫段(南段)的R剪切方向存在偏差,这可能与两个拉分盆地的发育程度有关。  相似文献   

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions     

Mohammad Pournaghiazar  Adrian R. Russell  Nasser Khalili 《国际地质力学数值与分析法杂志》2013,37(4):331-352

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

在GPS伪距观测值中发现径速偏差     

胡新康  李延兴 《大地测量与地球动力学》2000,20(1):43-50

在 GPS伪距观测值中 ,发现存在着随测站和卫星距离变化而产生的系统偏差。经过严密、系统的计算 ,证明它是普遍存在的一种自然现象。它的主要部分和径向速度呈线性关系 ,在卫星向测站运动时伪距值偏大 ,在卫星背向测站运动时伪距值偏小 ,并呈负对称 ,偏差最大可达60 m。  相似文献   

Study of bond stress–slip relationship and radial dilation in prestressed concrete     

José Mª Benítez  J.C. Gálvez  M.J. Casati 《国际地质力学数值与分析法杂志》2013,37(16):2706-2726

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

非均匀温度场中熔体结晶作用与科马提岩结构成因     

谭劲  赵珊茸 《地质科技情报》1994,13(4):35-40

具有重要岩石学和构造学意义的科马提岩，最吸引人同时又最令人困惑的特征之一是它的鬣刺结构和分层构造。本文从喷出地表的岩桨冷凝时温度分布、熔体性质与结晶作用的密切联系，把科马提岩浆喷发形成的岩流作为一个冷凝整体。通过与金属铸锭浇注成形和矿石冶炼生产的比较，发现它们在冷凝固结过程中温度场特征、熔体的性质、结晶能力和结晶方式都有十分相似的特点，并以此为出发点详细解析了科马提岩的鬣刺结构和岩石分层构造的形成  相似文献